Construction of Gate at Tharu on link road NH-154 to village Tharu in Tehsil Nagrota Bagwan District Kangra (HP) (SH-Construction of Gate at RD 0/000)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (One point five metre) in width or 10 sqm (Ten square metre) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soils as directed, within a any lead complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing and laying in position cement concrete 1:4:8 (One cement; four sand; eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in foundation and plinth complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level cement concrete 1:1.5:3 (One cement; one point five sand; three graded broken/crushed stone aggregate 20mm (Twenty millimetres) nominal size mechanically mixed and curing complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level cement concrete 1:1.5:3 (One cement; one point five sand; three graded broken/crushed stone aggregate 20mm (Twenty millimetres) nominal size, excluding cost of centering, shuttering, finishing and reinforcement complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing Tor steel reinforcement of Thermo Mechanically Treated bars of grade Fe-500D of Tata Tiscon/Sail for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

BProviding and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government

Providing and fixing stone cladding upto any lead/heights with 18mm (Eighteen millimetre) thick gang saw cut stone with (machine cut edges) of uniform colour and size fixed to columns and walls over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : Four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as per approved drawing, design and as directed by the Engineer-in-charge and as per HPPWD technical specification including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes excluding GST imposed by the Government