Construction of Anganwadi Ward 14

Amount

Supply of Material for Anganwadi

Corner angle 45x45x5 mm 2.50 long

Black Japan

Prop 2 m (2-3.5m)

Single clip

Bright finished or black enameled mild steel screws 20 mm

PVC vent cowl 63 mm dia

Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm

Column clamp 450x1070 mm

Wall form panel 1250x450xmm

Safeda ballies 125 mm diameter

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Corner angle 45x45x5 mm 1.50 m long

Red oxide Zinc chromate primer

Double clip (bridge clip)

C.P. brass waste 32 mm

Chromium plated Brass screws 25 mm

PVC Elbow 63 mm dia

Pink primer (for wood)

M.S. Tube 40 mm dia

15 mm PTMT bib cock

PVC pipe 63 mm outer dia. 4 kgf/cm2

C.I. bracket for wash basin and sinks

15 mm C.P.brass tap

Brass bib-cock-15 mm dia

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Anodised Aluminium tower bolt (barrel type) 200x10 mm

Chromium plated Brass screws 30 mm

Beam clamp 300-380 mm (450-1070 mm)

100 mm S.C.I. trap with vent heel

Bright finished or black enameled mild steel screws 40 mm

Hollock ballies 125 mm diameter

Brass 100 mm mortice latch and lock with 6 levers without pair of handles

Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock

100 mm channel shoulder 2.5 m long

Vitreous china flat back wash basin 550x400 mm

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

PVC pipe 25 mm outer dia. 10kgf cm2

Adjustable span ESO+SI (2.35-3.40)

wall form panel 1250x500 mm

Synthetic enamel paint in black or chocolate shade

Rawl plug 50 mm (designation 10 nos)

Second class kail wood in scantling

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Welding by electric plant

Vitreous China orrisa type w.c. pan size 580 mm

PVC pipe 32 mm outer dia 6Kgf/cm2

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Common burnt clay F.P.S. (non modular) bricks class designation 7.5

Adjustable telescopic prop 3 m (2.02-3.75m)

PVC pipe 110 mm outer dia. 4kgf/cm2

Flats up to 10 mm in thickness

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Mild Steel round bar above 12 mm dia

35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished)

Polyethylene water storage tank with cover and suitable locking arrangemnet

Second class kail wood in planks

Structural steel such as tees, angles, channels and R.S. joists

Mild steel tubes hot finished welded type

Gravelly soil (including conveyance)

Plastic emulsion paint

Stone Aggregate(single size): 10 mm nominal size

Stone Aggregate(single size): 40 mm nominal size

Anjili wood planks

Fine sand (zone IV)

Stone Aggregate(single size):20 mm nominal size

Anjili wood scantls

Coarse sand (zone III)

Vitrified floor tile 60x60 cm

Solid blocks of size 30x20x15cm

Twisted steel/deformed bars

Portland Cement

Mithra enterprises (BID ID -2199512)