WELCOME MAINTENANCE TO SMQ AND CERTAIN B/R REPAIRST TO NCS(E) ATRS, CIVILIAN QTRS, MES QTRS, RED QTRS AND MAP QTRS AND OTHER MARRIED ACCOMMODATION AT CHAF BANGALORE

Amount

Preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable materials like white cement or plaster of paris and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed.

Complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil emulsion distemper over a coat of chalk whiting, complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable materials like white cement or plaster of paris and applying one coat of oil bound distemper on old distempered ceilings, cornices etc. including necessary scafolding upto 6th storey, complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable materials like white cement or plaster of paris and applying one coat of white washing including necessary scafolding upto 5th story, complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable materials like white cement or plaster of paris and applying one coat of white washing including necessary scafolding upto 6th story, complete all as specified and directed.

Taking down cement or cement lime plaster, any description onPCC block/brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement, complete all as specified and directed.

Rendering 10 mm thick in cement plaster 1:3 on ceiling on concrete or brick surfaces, finished even & smooth without usig extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls including cornices pillaster etc and applying two coats of oil emulsion distemper white or tinted over a coat primer, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Preparing of old painted surfaces of wood & wooden based surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparing of old painted surfaces of steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 SQ M but n exc 0.18 SQ M , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes, complete all as specified and directed.

Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting, complete all as specified and directed.

M&L for granite (of any type) stone slab 16 to 20 mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of debris to outside of MD area, complete all as specified and directed.

Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) in plinth protections and similar works inculding necessary form works, complete all as specified and directed.

40 mm thick PCC (1:2:4) using 40mm graded aggregate in floorings finished cement concrete surface even and smooth with out using extra cement, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removal of debris to outside of MD area, complete all as specified and directed.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

Pre-cast cement concrete block in PCC 1:3:6 type C1(20mm graded aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6, complete all as specified and as directed

Rendering 15 mm thick on external fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished faiar and even without using extra cement incl; mixing of water proofing compound, complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement, complete all as specified and directed.

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement, complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site, complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and stacking at site, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sq. M each and stacking at site where directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and stacking at site, complete all as specified and directed.

Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc complete, as specified size of frme105x60 mm, complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc complete, as specified size of frme125x60 mm, complete all as specified and directed.

35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers and fitted to chowkats, complete all as specified and directed.

30 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) and fitted to chowkats, complete all as specified and directed.

35 mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) and fitted to chowkats, complete all as specified and directed.

30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated, complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer, complete all as specified and directed.

Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 Sq. M and not exceeding 0.5 Sq. M each, complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame, complete all as specified and directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and directed.

4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, fixed as in repairs, complete all as specified and directed.

Aluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

Aluminium alloy wire cloth, o.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, fixed as in repairs, complete all as specified and directed.

100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised, complete all as specified and directed.

75mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised, complete all as specified and directed.

150 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

100 mm long Extruded Aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in hold fasts and similar works, complete all as specified and directed.

Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O, complete all as specified and directed.

Double legged floor door stopper aluminium alloy with rubber etc, fixed as in repairs, complete all as specified and as directed

110mm pvc traps 'P' or 'S', fixed as in repairs, complete all as specified and directed.

Vitreous Ware wash down water closet (Pedestal), white (ETWC) with seat cover(fancy type ETWC connected with flush tank), fixed as in repairs, complete all as specified and directed.

10 Litres capacity dual type PVC low level SLIMLINE Flushing Cistern with brackets, fixed as in repairs, complete all as specified and directed.

Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand, fixed as in repairs, complete all as specified and directed.

15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repairs, complete all as specified and directed.

15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repairs, complete all as specified and directed.

15 mm fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed as in repairs, complete all as specified and directed.

Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating, fulsh pipe and union for discharge pipe, fixed as in repairs, complete all as specified and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces, complete all as specified and directed.

Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges, fixed as in repairs, complete all as specified and directed.

Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, fixed as in repairs, complete all as specified and directed.

Waste fittings brass chromium plated with PVC outer cover, 40 mm dia for stainless steel sink, fixed as in repairs, complete all as specified and directed.

20 mm curtain rods of aluminium annodised powder coated fixed in existing brackets, fixed as in repairs, complete all as specified and directed.

Curtain rods brackets aluminium annodised powder coated, fixed as in repairs, complete all as specified and directed.

4 levers Brass Mortice lock, vertical type,of Size 100mm, fixed as in repairs, complete all as specified and directed.

4 levers Brass Mortice lock, vertical type,of Size 75 mm, fixed as in repairs, complete all as specified and directed.

Supply only intergral wter proofing compound, complete all as specified and directed.

3mm thick sheet glass in Squares not exc. 0.5 SQ M in each pane fixed with wooden beads or putty (in metal frames ) up to 4th storey including hacking out old unserviceable broken glass any thickness , size quality or description from wooden / steel frame fixed with wooden beads/ metal pinning, complete all as specified and directed.

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc. , complete all as specified and directed.

Aluminium handles cast type anodized 125mm, fixed as in repairs, complete all as specified and directed.

Aluminium handles cast type anodized 100mm size, fixed as in repairs, complete all as specified and directed.

Welding in repairs not exceeding 6mm thick metal, complete all as specified and directed.

32mm dia. PVC waste pipe for WHB 60cm long with union, fixed as in repairs, complete all as specified and directed.

Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc., fixed as in repairs, complete all as specified and directed.

15mm dia. Bib tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-90gms) ISI marked, fixed aas in repairs, complete all as specified and directed. Make : Prayag/Polytuf

15 mm dia. Pillar tap standard of PTMT any colour high pressure screwed down for iron pipe(Min weight 15mm-120 gms) ISI marked, fixed as in repairs, complete all as specified anddirected. Make : Prayag/Polytuf

Plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed as in repairs, complete all as specified and directed.

Bathroom cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall, fixed as in repairs, complete all as specified and directed. (Make : Prayag or Equivalent)

Stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc, fixed as in repairs, complete all as specified and directed

Taking down existing steel window/ventilator shutters area n exc 1 SQ M each and carrying out necessary servicing incl welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and refixing with new hardwares and re fixing the window shutters in position, complete all as specified and directed. Notes : (i) Windows are to be fixed upto 5 storeys of buildings (ii) Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Taking down existing steel window/ventilator shutters area n exc 1 SQ M each and carrying out necessary servicing incl welding/greasing/oiling etc for smooth functioning and taking down unserviceable hardwares and replacing with new hardwares and re fixing the window shutters in position, complete all as specified and directed. (i) Note : Windows are to be fixed above 4 storey and upto 6 stories of buildings (ii) Note: Hardwares wherever required to be replaced shall be measured and paid seperately at supply only rates under respective items of this schedule.

Supply only mild steel box type hinges, suitable for steel windows, complete all as specified and directed.

Supply only mild steel handles , suitable for steel windows fixed with necessary nut, bolt and washers, complete all as specified and directed.

Mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, fixed in repairs, complete all as specified and directed.

Supply only 300mm, ordinary rat rail rod pattern springs including roller and roller plate, complete all as specified and directed.

19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

125mm aluminium anodised Hasp and staple, safety type fixed with screws, fixed as in repairs, complete all as specified and directed

Kavitha Constructions

Sangam Construction