Jhiryan Grunt Pumping water supply scheme

Amount

Pipe Line Work

Supplying carting , laying , jointing of full length 100 mm G.I (M) pipes, including jointing etc.

Supply of HDPE pipe including laying jointing Field testing,commissioning complete at site of HDPE PN-6 (pe100 grade compound)pipe as per IS 4984 and specifications for water application including all cost of material, labour required,transpotation,loading,unloading& stacking etc.

Supply, carting and fixing in position of following CI D/F sluice / Gate valve for flow regulation & scouring including cost of valve specials, labour & T&Pcomplete. Pressure PN 1.0

Air valve 25 mm dia

Fire Hydrant 80 mm dia

Dismantling of following type of road surfaces for laying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials.

Kharanza road

Cement concrete road

Bituminous road.

Excavation of pipe line in soil mixed with course sand, shingle, kankar, including refilling of trenches after laying of pipe line including watering ramming etc.

Reinstatement of following type of road surfaces after laying of pipe line including supply of all material ,labour,T&P etc complete.

Kharanza road

Cement concrete road

Bituminous road.

Construction of following chambers

(i) Sluice valve/ wheel valve chamber(90X90X100)

Air valve chamber / Fire Hydrant chamber

Construction of Pillar type Stand post complete as per type design.

Supply and fixing of Water connection with Fussion saddle including all material like ferrule, G.I./HDPE Pipe, Bends, Tab etc. complete with labour.

Building Work : Pump House

Excavation in foundation in ordinary soil (loam clay and sand) including lift upto 1.5 m and lead upto to 50 m refilling, watering and remaining of excavated earth into trenches or into the space between the building and sides of foundation trench.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 8:4:1 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 6:3:1 in foundation, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Concrete with 4 cm gauge stone ballast, local sand and cement in proportion of 4:2:1 in superstructure, including supply of all materials, labour, T&P etc. required for proper completion of the work.

Mild steel or iron work in RCC work wrought to required shape as necessary including bending for proper completion of work including supply of steel and wastage etc.

RCC with cement, coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in slabs excluding supply of reinforcement and its bending but including its fixing and binding the same with 0.50 mm thick binding wire in position and nece

First class brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion the work.

1st class brick work in 1:6 cement and local sand mortar in superstructure including supply of all materials, labour, T&P etc. required for proper completion the work.

Centering and shuttering including strutting, roping and removal of forms of roof

12 mm thick plaster with cement & local sand mortar in 1:6 over brick work minimum thickness not to be less than 10 mm including supply of all materials, labour, T&P etc. required for proper completion the work.

Same as above item no. 17 but in proportion 1:3 with cement and local sand mortar over ceiling.

Same as above item No. 17 but in proportion 1:4 with cement and local sand mortar.

40 mm thick 1:2:4 P.C.C. floor with cement and coarse sand & 2 cm gauge approved stone ballast laid in panels finished with 3 mm floating coat of neat cement and 7.5 cm thick base concrete consisting of cement and local sand and 1st class brick bal

Providing & fixing of 4 mm thick and 40 mm wide glass strips in flooring.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer

Supply and fixing of Z'' section windows complete with fittings etc.

Supply & fixing 4 mm thick plain glass in windows including supply of nails and putty etc. required for proper completion of the work.

Painting or varnishing of new iron or wood work with one coat of priming and two coasts of approved paint and varnish including supply of all materials, labour, T&P etc. required for proper completion of the work.

Supply and fixing of girder of 200 mm × 100 mm size 15 mm thick, over the pump house including its painting with approved paint and also one coat of primer.

Grading roof for water proofing treatment with cement mortar 1:3 (1cement : 3coarse sand )

Finishing wall with Acrylic smooth exterior paint with silicon additive of requared shade. New work ( two or more coat applied @ 1.43 lit/10Sqm over and including primer applied.(DSR Code 13.47.1)

White washing three coats including supply of all materials labour, T&P etc. required for proper completion of the work.

Earth filling in water works compound and inside Plinth.

Construction of B.O.E. road complete.

Supply ,fixing of 3,60 M wide M.S. gate as per type design with wicket including fabrication and construction of Gate Pillar in 1:6 brick masonary complete in all.

Over Head Tank and its appurtenant works.

Supply of all materials, T&P etc.and construct an RCC over head tank including Drawing, Design and Soil bearing capacity test with RCC staircase & 1 m wide balcony, G.I. pipes railing consisting of 3 rows of 20 mm dia. G.I. pipe and angle iron posts around balcony & at the dome periphery, M.S. ladder from balcony to top of tank and inside the tank, supply and fixing M.H. cover with locking device, 1.2m dia ventilator, lightening conductor, water level indicator, supply and fixing of pipes, CI D/F pines, supply and fixing M.S. clamps with RCC column 40mm PCC 1:2:4 over 80 mm PCC 1:4:8 in apron, 150 mm semicircular drain around the tank, escape channel of 20 m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of apex paint and testing of tank for water tightness and also excluding cost of supply and fixing of all necessary pipes and valves etc. all complete with inlet, outlet, overflow and washout pipes with bypass arrangement and necessary fittings and specials and testing of bearing capacity.Assuming Soil Bearing capecity 8 MT/Sqm.

Out let pipe - M.S. D/F 150 mm dia

In let pipe - M.S. D/F 100 mm dia

Over flow pipe - M.S. D/F 100 mm dia

Washout pipe - M.S. D/F 80 mm dia

170 KL Capcity & 18.0 Mt staging

Transportation of Rig Machine, Air compressor O.P unit camp equipages, connected T&P & necessary material required for drilling up to site of work, including loading, unloading etc. complete.

Errection and Leveling of Rig Machine at site of work

Dismantling of Rig Machine & Clearance of site after satisfactory completion of work.

Drilling of borehole from GL to 150 BGL mtr.of minimum pilot bore size 600 mm.after reaming including water arrangement for drilling ,back ashing ,collecting of samples from different strata, prepairing and submitting strata chart etc. Complete

Supply and lowering of 300 mm dia MS ERW fincut 7.9 mm thick Plain pipe

Supply and lowering of 300 mm dia MS ERW fincut 7.9 mm thick slotted pipe

Supply and fixing of 300 mm dia, 8 mm thick tubewell cap.

Supply & fixing of 300 mm dia M.S.D.I housing clamp and Girder Set.

Supply & fixing of 300 mm dia Bail plug.

Supply & Shrouding of Pea gravel in between bore & tubewell assembly to the entire depth of tubewell.

Development of tubewell by 250 PSI/1100 CFM Air compressor.

Development of tubewell by the suitable capacity O.P unit including supply & installation of pumping plant.

Chemical & bacteriological testing of water sample.

Supply of Submersible pump-set of 700 LPM cold and clear water against a total head of 70mtrs. with motor of 20 HP suitable to operate on 415±10% Volts, 3 Phase, 50 C/S A.C. Supply complete.(one no.as spare)

Supply of 10 Sq. mm PVC insulated 3- core copper conductor submersible cable.

Main Switch 63 Amp.with wooden board.

Supply of jointing material such as lugs, tapes etc.

Double loop earthing of all electrical equipments including supply of G.I.earth strips (25mm X 5mm), G.I.earth Plates (600mm x 600mm x 6mm), G.I.Boxes,funnel,pipe etc as required as per latest I.E.Rules will be carried out by the contractor including digging of pits, filling of charcoal and salt in pitss complete in all respect (As per I.E.Rules)

Main Piping and Valves-( 100 mm dia MS column pipe assembly having thickness 5.4 mm both ends flanged etc. complete. - 42 mtr length, M.S.D.F. bend 90º × 100 mm dia - 2 Nos, 100 mm dia C.I. D/F sluice valve with hand wheel PN-1.0 - 2 Nos, 100 mm dia C.I. D/F Reflux valve -1 No, 100 mm dia M.S.D.F. distance piece 2 mtrs. length - 1 No, 100 mm × 100 mm × 100 mm M.S.A.F.Tee - 1 No, 100 mm dia. MSDF distance piece 3.0 mtr. Long.-2 Nos, Ventury (100 x 75 mm) of 0.30 meter long- 1 No, 100 mm dia MS DI clamp heavy duty - 1 Set, M.S.T/W Cap (100 x 300 mm) - 1 No, Nuts, bolts, rubber / fiber packing for jointing above pipes & specials - 1 set )

Supply of Gauges - ( Supply of 100 mm dial pressure gauge with control cock and fittings of range 0-15 kg/cm2 - 1 No, Supply of 100 mm dial depth gauge direct reading type complete with airline and fittings - 1 No, Complete with all fitting )

Supply of tools required for maintenance of pumping plants( DE spanner set - 1 Set, Ring spanner set - 1 Set, Screw drivers - 2 Nos, Pliers - 1 No, Hammeres - 1 No, Pipe wrench 14" - 1 No, Screw wrench - 1 No, Crimping tool scissor type - 1 No, Tong tester - 1 No, Chain wrench 100 mm dia - 2 No )

Supply of chain pulley block of 3 ton capacity 4.5 mtrs. lift complete with travelling trolley.

Supply of red colour rubber resistance sheet of size 1 m × 2 m × 0.025 m.

Supply of Chlorinator Dozer pumps ,Capacity: 6 lph,8 kg/cm² pressure.

Injector and NRV with PVC pipes etc for chlorinator Dozer pump.

200 Ltr.Capacity PVC tank for chlorinator Dozer pump.

Starter cum panel for chlorinator Dozer pump.

Single phase automatic stabilizer for chlorinator Dozer pump.

Chlorine testing kit for chlorinator Dozer pump.

Supply of Sodium hypo-chloride (NaCl) solution.

Installation and Commissioning of Pumping Plants with aa acessories inside the pump house .

Testing of pumping plants against guaranteed figures of Schedule 'E' at site.

Painting of entire installation with 2 coats of super enamel paint as per direction of Engineer-In-Charge of works.

Supply of Pump operator Grade-I for six months ( each one no.)

Supply of Chaukidar for six months ( each 02 nos)

Wiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cable in surface PVC conduit as required.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire

2x4 sq. mm + 1x4 sq. mm earth wire

Supply and fixing of Piano type 5 amp switch on the existing switch board.

Supply and fixing of 3 pin 5/6 amp socket outlet on the existing switch board.

Supply and fixing of metal box of 180 mmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required.

Supply and fixing of 8 way double door S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/ RCCB/Isolator)

Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required.

Supply and fixing of bulk head light Bajaj / Philips / equivalent make

Supply and fixing of 40 W tube light complete in all respect (Bajaj / Philips / Equivalent make)

Supply and fixing of 14 watt CFL on above fitted Holder (Bajaj / Philips / Equivalent make)

Supply in fixing of 23 watt LED external lighting luminaires with mounting bracket etc. complete.

SITC of , 3 phase digital rolling contact 40 KVA servo voltage stabilizers suitable for unbalance voltage & unbalance load including laying of proper size cable and fixing of proper size copper lugs on input and output cables on both ends at different sites. For input voltage 290 - 460 volts (phase to phase)

25 Smm Al armoured cable 3.5 core ,1.1 KV grade

63 Amp., TPN, Change over switch with wooden board

Complete GI double loop earthing with materials such as earth plate, earth strips, coal, salt etc. required as per IE rules.

Installation

Commissioning

Testing at works

Testing at site

Shri Ganga Drilling Co.