Repair / Renovation / Upgradation of Auditorium at Girls Higher Secondary School Kothibagh.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm

Providing and fixing of 12mm thick plyboard ceiling of approved quality in walls/ceiling with necessary nails etc.complete.

Providing and fixing of imported wooden panelling lining on walls, ceilings tongued and grooved planks including cost of basework of 12mm to 10mm(as per requirement) thick ply 50 mm wide 600mmx600 mm center to center horizontally and vertically fixing with rawl plugs and screws and cover mouldings including cost of nails, screws and scafolding etc. complete (12mm thick)

Making the opening for door/window/clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground.

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and fixing of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc. complete job.

Providing and fixing of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc. complete job.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood based surfaces incl wood primer complete job.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing hand made wooden balusters of budloo wood for railing including applying a priming coat of approved brand complete job (Baluster) as per the directions of the Engineer-in-charge at site

Providing and fixing hand made wooden railings of budloo wood including top rail of size 3'X4" including applying a priming coat of approved brand complete job (Railing) as per the directions of the Engineer-in-charge at site (height of railings 3'-6")

Providing and fixing in position HDF Base wooden flooring with planks of sizes 8 mm thick, 1200 mm length (minimum) and 190 mm wide (minimum), in approved colour, texture and finish. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40Kg / cum, over prepared surface. The HDF wooden planks shall have minimum density of 900-950 kg/ m3 with Eco friendly UV coating, all complete as per direction of the Engineer-in-charge.

ELECTRIFICATION:-

Wiringforlight point/fanpoint/exhaustfanpoint/callbellpointwith 2X 1.5 sq.mm FRLS PVC Insulated copper conductor ( Havells Life guard/ Polycab Green/ Fenolex/ Salzer/ eq.standard make asdesired byengineer incharge ) single core cablein surface /recessed medium ClaSS PVC conduit,with modular switch (Anchor roma plus/ Legrand Mylinc/ SSK NV/ schneider Livia/ ABBT visha make.), modular pIate, suitabIe GIbox and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc.as required.

Wiring for light / power plug with 2X4 sq.mm+1 X 4 sq. mm earth wire, FRLS PVC insulated copper conductor ( Havells Life guard/ Polycab Green/ Fenolex/ Salzer/ eq. standard make as desired by engineer-in-charge) single core cable in surface/ recessed medium class PVC

Supplying and fixingsuitable size GI box with modular plate and cover Infront on surface or in recess, including providing and fixing 6 pin5/6 & 1S /16 Amodular socket outlet and15/16Amodular switch, moduIar plate, suitable GI box, connections etc. as required. Modular Switch & Socket:- ( Anchor roma plus/Legrand Mylinc/ SSKNV/Schneider Leiva /ABBT visha makemake.)

Wiring for lighting circuits/ 6-10amp power plug with 2X2.5sq. mm FRLS PVC insulated copper conductor ( Havells Lifeguard/ Polycab Green/ Fenolex/ Salzer/eq. standard make as desired by engineer incharge ) single core cable in surface/ recessed medium class PVC conduit along with 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos.3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- ( Anchor roma plus/ Legrand Mylinc /SSKNV/ schneider Livia /ABBTvisha make.)

Supplying and fixing suitable size GI box with modular plate and cover In front on surface o rin recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in Front on surface or in recess including providing and fixing 25A modular socket outlet and 25 A modular SPM.C.B,"C"curve including connections etc. as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor ( Havells Life guard/ Polycab Green/ Fenolex/ Salzer/eq. standard make as desired by engineer in charge), single core cable in surface/ recessed medium class PVC conduit as required.

a) 2X1.5 sq.mm + 1 X 1.5 sq.mm earth wire

(b) 2X6 sq. mm+ 1X 6 sq.mm earthwire

(C) 2X10 sq.mm+ 1X6 sq. mm earthwire

(d) 2 X 16 Sq.mm + 1X6 sq.mm earthwlre

Supplying and fixing of following sizes of medium class PVC conduit (Anchor/ Ravindra/ Eq. make) aIong with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint complete 25mm.

Providing and fixing of 6-16 mm Cu thimbles duly cramped at cable ends.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supply installation testing and commissioning of Indicator of Anchor roma plus/ Legrand Mylinc/ SSKNV/ Schneider Livia/ Crabtree athena make1

Supply installation testing and commissioning of 18 W + LED Surface/ recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 110 Inn/ W with Pressure Die cast Aluminium body, Heat Sink and P.F.> 0.95, THD< 10%, CCT 5700K, CRI80.The LED with Useful life of50000 Hrs atL70, separate driver, heat sink, earthing provision. The Input voltage range shall be 150 V to 270 V .The Fixture should have In-built Surge Protection of 2kV Certification:-LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/ Trilux/ Wipro make/ sample to be approved before installation.

Supply installation testing and commissioning of36 W+( 2x2)LED Surface/ recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 Inn/ W with Pressure Die cast Aluminium/ CRCA body, Heat Sink and P.F.> 0.95, THD < 10%,CCT 5700K, CRI80.The LED with Useful life of50000 Hrs at L70, separate driver, heat sink, earthing provision. The Input voltage range shall be 150Vto270V.The Fixture should have In-built Surge Protection of 2 kV Certification:-LM79 & LM80 test report should be from govt approved-house NABL lab/ government of India. The job includes AMC / reckoned from date of successful commissioning) of lighting fixtures or a period of Two years ,which includes replacement of fixtures of Philips/ TRulux /Wipro make / sample to be approved before iinstallation.

S/F testing and comm. Of 20W+4k.wall mounted LED batten with powdered coated aluminum housing &integrated electronic driver with minimum system lumen efficacy of 100 Inn/W with THD < 10%.( commercial series) CCT 5700K,CRI80.The LED with Useful life of 50000 Hrs at L70, separate driver, heat sink, earthing provision. The Input voltage range shall be 150 V to 270 V. The Fixture should have In-built Surge Protection of 2kV. Certification:-LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which Includes replacement of fixtures of Philips/ Trulux /Wipro make/sample to be approved Before installation.

Supply installation testing and comm. of floodlight 100 W ( warm, white), Epoxy powder coated die-cast aluminium housing (LM24)with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entryandprovisionforloopin-loopoutclass1,lP66,IK07, with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC, Iower THD, toughned glass and secondary Iens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other safety test as per IS 15885 Part- 2/Sec13, IEC60598-1. Preferred make: Philips/ Havel/ Wipro/ Crompton make. The job also includes the angle iron stand of suitable size to be grouted in cement concrete with hold fasteners complete job.

Supply installation testing and comm. Of 250-300mm sweep exhaust fan Shutter type/ steel body of havell/ USHA/ Crompton/ equivalent make as directed by engineer in charge, including making of space in wall/ window as per site requirement and necessary connections.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE5 star rated, ceiling fan (USHA/ havell/ Bajaj/ Crompton/ equivalent make as directed by engineer in charge,) with Brush Less Direct Current (BLDC) Motor, class of insulation: B,3nos. blades, 30cm long down rod, 2nos.canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W)minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS:374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories Including safe typin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. The job includes the steel rod of suitable size and length to be installed at site.

Supply and fixing of 6 amp/ 250 VA.C fan dimmer step type 2 module With cover plate Anchor roma plus/ Legrand Mylinc/ SSKNV/ Schneider Zencelo /HavelI Coral make

SITC of wall fan 400 mm sweep as approved by EIC, 240v, 50Hz complete, etc. as required Make (Usha, Orient/ Crompton/ Havells)

Supply fixing testing and comm. .Of backlite holder/batten holder/angle holder/ ceiling rose SSK/Anchor make Incl. PVC Block.

Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distributionn board, (legrand/ Shinider/Hager/ABB make) 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ lsolator)6 way (4+24), Double door

Supplying and fixing following way,single pole and neutral, sheet steel, MCB distribution board, (legrand/ Scheinider/ Hager/ABB make) 240V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 16 way, Double door

Supplying and fixing of following rating, 240/415 V,10kA,"C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. legrand/ Schinider/ L&T./ ABB make/ equivalent make as directed by engineer in charge.

a) 6-32 Amp SP MCB

b) 40-63 amp DP MCB

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc as required.

S/L,testing and cominissioning of PVC aluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. HaveIl/ Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. c) 50 sq.mm 3.5 core

Design, Fabrication, Supplying, Installation, Testing and Commissioning of following pane", duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/ wall mounted, vermin and dust proof, in door type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other Allied accessories etc.as required. (As per approved design, size may vary as per site requirement)

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with ssuitable size of PVC insulated copper conductor cable including earthing etc. as required.

NORMAL INCOMING

a)160 A 4P MCCB 25 KA including spreader links including spreader links, icu=iCs=100% (Adjustable thermal and Adjustable magnetic release) Legrand/ Shinder/ Semiens/ ABBmake.

b) 4 No.of Aluminium Bus Bar of 300 Amp,

c) Digital meters and phase indicators-1set.

d) On load Change over switch 100Amp for generator. Front operated.

e) 4 No.of Aluminium Bus Bar of 200 Amp,

f) Digital meters and / phase indicators-1set.

INVERTER INCOMING

a) 100 amp DP MCB

b) 2 No. of Alminiuim bus Bar of 200 Amp.

OUTGOING:

a) 40-63 Amp DP MCB

b) Space for 12 way MCB's

Supplying, Installation, Testing and Commissioning of Co2 type Fire Extinguisher4.5 Kg. CapacityI sl Mark (IS:15683) suitable for' B' and 'C' class fires - inflammable liquids, gaseous fires Iike L.P.G.and acetylene, and electrical.

Supply, installation, testing & Commissioning of 10 KVA single-Phase IN single-Phase out ON Line UPS System to provide backup time of30 minutes at full load, with In-Built Isolation Transformer of reputed make dully, ISII Marked (APC Schineider/ ETON/VERTIV/equivalent standard make) (Compitable to Generator Supply having varing frequency)'’With on line double conversion topology, high frequency techenology, with front LCD, autornatic bypass for fault tolerance & complete with required Number,12 Volts 65 AH SMF VRLA Batteries (Exide/Amaron/ Quanta make) with connecting links with angle iron battery stand complete job, complete with battery rack with two year warranty against an manufacturing defect. The job further includes AMC far Ups and barriers for a period of three years with replacement warranty reckoned from date of sucessfull commissioning.

53 Supply installation testing and commissioning of energy efficient 2 Ton inverter type split Conditioning system (Hot and cold) suitable for operation on AC supply single phase 220 V. The indoor unit fitted on the wall by employing suitable clamps and the outdoor unit fitted on the wall by using suitable angle iron stand fitted with nuts/ bolts outside the room to avoid no’s ’including standard length of suitable size copper tubing covered with nitrillic foam, topping up with refrigerant for additional length of piping if required, PVC flexible drain pipe, suitable capacity 3 core sheathed/ pvc Insulated coper cable and a battery operated wireless remote unit. the job also includes repairs to walls wherever the same reccut and the AMC of AC for a period of one and a half year from date of successful commissioning. (Mitsubishi/ Toshiba/0 General/ equivalent standard make as desired by Engineer in charge.

Supply, installation, testing and commissioning of reiay type voltage Stabilizer suitable for 2 Ton AC operating from Input voltage 90-260 Volts thereby producing output voltage of 230 volts+/-3% (Vguard/ Livgaurd/ LG note)

Audlo/Visual

Supply Installation Testing & Commissioning of 10"Two-Way speaker System in a Trapezoidal Enclosure; 400 W @ 8 ohm Continues Power, 900 W program, Frequency 40Hz to 20 KHz sensitivity 98 dB 1W/1M, SPL 130dB, Coverager: 80 (V) & 60 (H) with 1,4"Compressed treble unit x 1

Supply Installation Testing & Ccommissioning o fPower amplifier, Four channel 1300 WattS RMS @ 8 ohms 4 x 2100 watts RMS @ 4OhMS, Sterio power THD< 0.1%, S/N Ratio 112dB Front-to-rear airow, temperature controlled speed, Short circuit, open circuit, direct voItage, high temperature, radio frequency, ultralow frequency, current peak limitery input connector 3-pin XLR, electronically balance, Applied to big performance, stadium, high class commercial recreation club etc. complete in all respect upto the entire satisfaction of Engineer in Charge of the work. Make:Heinrich/ D & B Audio Teknik/ MC Sqaur

Supply Installation Testing & Commissioning of 16 channels Mixing Console with Mono Input 8 Channel, Stereo Input 4 group, Mono Insertion Channel B Channel, Output channel 3 main output 4 output group; 2 CH aux output; 2 CHCD/ TAPE auxiliary output; 2 CH effect output Phantom power 48V, Frequency Response 20Hz -20kHz, Channel Cross talk less than 90 dB, S/N Ratio 83 dB, Gain difference between Channel less than 2 dB, Distortion degree less than 0.02%, 21 Kind of DSP Effects.

Supply Installation Testing and Commissioning of Dynamic Vocal Microphone with cardioids polar pattern, frequency response 70 Hz- 20 kHz (@1cm:20Hz-18kHz),THD147/156dB, Impedance (=600 ohms complete in all respect upto the entire satisfaction of Engineer in charge of the work. Make :Shure/ TeIevic/ Heinrich

Supply, Installation, Testing and Commissioning of one handhled and one Lapel Wireless Mic system set with two transmitters dynamic microphone, Frequency Response 40Hz-15,000Hz, Surge mode PLL Phase lock, Dynamic Range) 90dB, THD (0.5%, S/N ratio) 90dB, Carrier frequency range 720-830 MHz, Power Consumption (85 mA. complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. Make-Heinrich/ Shure/ Televic'

Supply InstallationTesting & Commissioning of Connector accessories Make :Repuetd Make

Supply InstallationTesting & Commissioning o f19-inch Equipment Rack With standardized frame or enclosure for mounting multiple PA controllers, CD player, FM sources, Amplifiers etc modules. Size 18 U. Make: Valrack/ APC/ DIink/ Equivalent

Supply, installation testing and commissioning of LED VIDEO WALL SYSTEM Type:Indoor, fine-pitch,high-brightness LED Video Wall Quantity: 1 Complete Set Size:Approx.3.0mx2.0ITI (=6m’/65sq.ft) Pixel Pitch: P2.5 mm (Indoor, Fine Pitch) Brightness: * 1000 nits Refresh Rate: 3840Hz (flicker-freevideo) Contrast Ratio: z5000:1 Viewing Angle: 140° (H) /120°(V) Cabinet Material: Die-cast aluminum, front serviceable type Maintenance:Front access for easy replacement of modules andpower units Input Signal: HDMI /DVI/ VGA /USB /LAN Mounting:Wall-mounted with steel frame structure Power Supply: 230 V AC110%, 50 Hz Control Soft ware:Licensed software for calibration, brightness,and color correction PreferredJVtakesSamsune/LG/Delta/Unilumin/Christie/

Supply, installation testing and commissioning VIDEO WALL CONTROLLER / PROCESSOR Type: Professional-grade controller for multi-input and multi-window display Input Ports: Minimum 4HD MIinputs,2 DV Iinputs,1LAN,1USB Output Ports: Dual output for redundancy Resolution Support: Upto 4 K UHD Functions: Video scaling, switching, image split, brightness/color uniformity control Control: Software-based control interface and front-paneloperation Preferred Makes: Novastar/ Brompton /Colorlight/ Extron/Kramer