Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹42.2 L+₹2.2 L (5.56%)Rejected-Finance | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹42.2 L+₹2.2 L (5.59%)Rejected-Finance | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹42.3 L+₹2.3 L (5.86%)Rejected-Finance | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹43.1 L+₹3.1 L (7.82%)Rejected-Finance | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹38.8 L
EMD Value
₹77,600
Closing Date
24 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
SPL REPAIRS TO LIVING IN BLOCK AT OFFICERS MESS (PH-I) AT AF STN BARRACKPORE UNDER GE (AF) BARRACKPORE
2023_MES_634795_2
8496/BKP/AF OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-D,
Category-a(i)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹77,600
Yes
18 Mar 2024
10 Feb 2024
26 Feb 2024
10 Feb 2024
24 Feb 2024
17 Feb 2024
Amount
Taking down chowkats or frames with shutters exc. 1.50 sqm and n.exc 4.00 sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc. 1.00 sqm and n.exc 2.00 sqm each complete all as specified and directed.
Taking down shutters of any description n.exc. 1.00 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm and n. exc 2.00 sqm each and refixing in the same openeing after necessary repair incl. easing, welding or any require item such as stay handle etc. and making good to existing surface complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and point in any morter complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
Dismantling of structural steel work including doors, gates but excluding framed truss etc. as in staircase/balcony grills complete all as specified and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position in framed work as in railing of staircase and removing materials from site of work complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and disposing off rubbish material where directed at low laying areas in defence land complete all as specified and directed .
Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins, facias, chajjas using necessary scaffolding and making good disturbed portion with rendering cement plaster, 10mm thick in cement mortar 1:3, finished even and smooth without using extra cement complete all as specified and directed.
Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
Material and labour for 2nd class hard wood, plain fillets. square, rectangular or triangular in section, wrought, chamfered or rounded secured with nails or brads sectional area exc 13sqcm & not exe 25sqcm complete all as specified and directed.
Supply and fix 30mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to match the shade complete all as specified and directed.
Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.
Supply and fix 9mm thick (5 Nos of ply) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with using adhessive of first quality to flush door shutter or to timber frame work etc. complete all as specified and directed.
Supply and fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per specification & drawing given on MES SSR Part-II 2020 complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame at site as per specification & drawing given on MES SSR Part-II 2020 complete all as specified and directed.
All as per item No 20.00 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and -ditto-.
Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately.
Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/aluminium frame complete all as specified and directed.
Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe- 410W Gde- E-250 quality-A including one shop coat of zinc chromate primer complete all as specified and directed.
Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Supply and fix 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including welding, bending or turning up, mitred angles, etc. as required including one shop coat of zinc chromate primer complete all as specified and directed.
Supply and fix powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
Supply and fix powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws with making provn for fixing of AC complete all as specified and directed.
Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge complete all as specified and directed.
Supply and fix aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane including hacking out old broken glass of any thickness, size, quality or description complete all as specified and directed. Note: Scaffolding and necessary form work shall be deemed included in quoted rate.
Supply and fix 4mm thick Sheet glass, tinted of any type, ordinary quality and glazing with aluminium clip/fillet with rubber packing in square exc 0.5 sqm in each pane complete all as specified and directed. Note: Scaffolding and necessary form work shall be deemed included in quoted rate.
Supply and fix 4 mm thick sheet glass tinted of any type ordinary quality and glazing with aluminium clip/fillet with rubber packing in square exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size, quality or description complete all as specified and directed. Note: Scaffolding and necessary form work shall be deemed included in quoted rate.
Supply and fix stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples, aluminium fillets/clip or nut bolts in wooden, aluminium or in steel shutters complete all as specified and directed. Note: Scaffolding and necessary form work shall be deemed included in quoted rate.
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.00mm and fixed with stainless steel wire staples, aluminium fillets/clip or nut bolts in wooden, aluminium or in steel shutters complete all as specified and directed. Note: Scaffolding and necessary form work shall be deemed included in quoted rate.
Supply and fix in repair, grating square 100mm size of PTMT (minimum weight 25 gms) complete all as specified and directed.
Supply and fix stainless steel butt hinges medium weight cold rolled 100mm size fixed with stainless steel screws complete all as specified and directed.
Supply and fix stainless steel tower bolt, medium weight cast rolled type 200mm long fixed with stainless steel screws complete all as specified and directed.
Supply and fix stainless steel handles, medium weight cast type 200mm long fixed with screws complete all as specified and directed.
Supply and fix stainless steel sliding door bolt 300mm long, bolt, not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fix MS Butt hinges medium weight cold rolled 100mm size complete all as specified and directed.
Supply and fix aluminium tower bolt, cast type, anodised 150mm long complete all as specified and directed.
Supply and fix aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
Supply and fix aluminium sliding door bolt 300mm long, bolt, not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Material and labour for pre-polished machine cut Kota stone in stair case tread flooring 20-25mm thick laid over 20mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Kota stone shall be single piece on one tread with nosing one side and grooving two Nos.
Material and labour for pre-polished machine cut Kota stone slab in stair case riser 18-20mm thick on vertical surfaces over 10mm thick cement plaster in (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and directed. Note : Kota stone shall be single piece on one riser.
Material and labour for pre-polished machine cut kota stone slab 18-20mm thick on vertical surfaces over 10mm thick cement plaster in (1:3) such , skirting, dado and pillar etc. jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing complete all as specified and directed.
Mirror polishing on existing marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed.
Material and labour 25mm thick PCC (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) as in levelling course for laying floor finishes etc. complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Ditto- all as per Item No 52 above but as in skirting laid over including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Material and labour for glazed ceramic tiles of size 350x250x7 mm / 450x350x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as require superfacial area not exc 150 sqcm complete all as specified and directed.
Material and labour for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
Material and labour for brick work with fly ash modular size bricks straight or curved on plan exc.6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work with mixing liquid water proofing coumpound (WPC) @ 200ml per 50Kg bag or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.
Supply only liquid water proofing compound (WPC) complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces and finished surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material and labour for preparation of new plastered surface of walls and applying two coats of acrylic washable distemper with 1st quality acrylic distemeper oil emulsion (ready mixed) having VOC content less than 50 gms/ltr of approved manufacture of required shade and colour including one coat of alkali resistant primer complete all as specified and directed.
Material and labour for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed.
Material and labour for preparation of new wooden surfaces over 10 cm girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of syinthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old decorated wall surface and applying one coat of distempering with 1 st quality acrylic distemeper (ready mixed) having VOC content less than 50 gms/ltr of approved manufacture of required shade and colour complete all as per manufacture specification and directed complete all as specified and directed.
Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surfaces complete all as specified and directed.
Material and labour for preparation of old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and directed.
Material and labour for preparation of old decorated surfaces and applying one coat of white wash on wall complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old wooden surfaces over 10 cm girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed.
Supply and fix in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.
All as per item No. 75.00 here in before but 20mm bore and ditto.
All as per item No. 75.00 here in before but 25mm bore and ditto.
Supply and fix 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
All as per item No. 78.00 here in before but 20mm bore and ditto.
All as per item No. 78.00 here in before but 25mm bore and ditto.
Re-fixing only 15 mm bore steel water tubing with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
All as per item No. 81.00 here in before but 20mm bore and ditto.
All as per item No. 81.00 here in before but 25mm bore and ditto.
Supply and fix 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fix in repair 15mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed complete all as specified and directed.
Supply and fix in repair, vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including cast iron P or S trap fixed on floor with cement complete all as specified and directed.
Supply and fix plastic water closet seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminium hinging device complete all as specified and directed.
Supply and fix in repair Vitreous china wash basin white flat back size 550 x 400mm incl cutting for and pinning in ends of brackets or erectting stand incl waste fittings, brass, chromium plated for glazed ware sinks, basin with long screws shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Dismantling of cast iron, PVC or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required for 100mm or 75mm bore of pipe complete all as specified and directed
Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed .
All as per item No 90.00 above but except pipe and -ditto-.
Supply and fix for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
Supply and fix for 110mm bore PVC (SWR) bends of any radius and provided with access door complete all as specified and directed .
Supply and fix 75mm bore, PVC (SWR) pipe, single socketed, in any length with rubber ring joints, fixed to walls including stack clamps complete all as specified and directed.
Supply and fix PVC (SWR) plain bend any radius for 75 mm bore complete all as specified and directed.
Supply and fix PVC (SWR) junction single, (single T) equal or unequal for 75 mm bore complete all as specified and directed.
Supply and fix in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet 75mm complete all as specified and directed.
Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviciable existing tank complete all as specified and directed.
Supply and fix 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Supply and fix in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook incl. making connection and fixed in position complete all as specified and directed.
Supply and fix UPVC Pipes (SCH-40) 50mm bore use as in waste pipe fixed to fittings and laid in trenches or fixed on wall complete all as specified and directed.
Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fix triple door corner cabinet with PP and PPCP material of size 848x343x250mm fixed on wall complete all as specified and directed.
Supply and fix in repair soap dish, chromium plated white, approximate size 160x160x90mm fixed with plugs with chromium plated brass screws complete all as specified and directed.
Material and labour for providing, PCC (1:2:4) type B-0 (12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges of chajjas etc. of any description complete all as specified and directed.
Material and labour for 20mm thick jet black granite for top shelves (of any type) work (table rubbed and polished) in cupboard shelves, steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite including moulding/nosing fixed independently complete all as specified and directed.
KAZI ENTERPRISE
M/S. B. N. CHATTERJEE
NC BOSE AND CO
BISWAS CONSTRUCTION
SITARAM CONSTRUCTION
TAPAS ENGINEERING CO
S. N. ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .