S B M G

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling with Sand in the Foundation sand including watering and ramming, cost and conveyance etc complete.

C C (1:4:8) using 40 mm HBG metal including Cost and conveyance of the all materials and labour charges etc complete at Columns etc complete

RR Masonry in CM (1:8) including cost and conveyanc of the all materials and labour charges etc complete for Basement and foundation etc complete

Supply and placing of the HYSD Steel TMT bars of Fe500 grade as per IS 1786-1985 , fabrication including cost and conveyance of all the materials etc complete.

RCC (1:2:4) using 20 mm HBG m/c metal including Cost and conveyance of the all materials and labour charges etc complete for Slbs etc

Manufacture, Supply and Delivery of 110mm dia 4kgf/cm2 Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Plastering with C.M. (1:3) 12mm thick including cost and conveyance of all materials. scaffolding charges, curing and all labour charges etc., complete.

Labour charges for laying, fixing and commissioning of 110mm dia PVC pipe including necessary fittings etc with solvent jointing as per standard practice etc including cost and conveyance of all materials and all labour charges etc complete

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Filling with Sand in the Foundation sand including watering and ramming, cost and conveyance etc complete.

PC C (1:4:8) using 40 mm HBG metal including Cost and conveyance of the all materials and labour charges etc complete at Columns etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal etc including cost and conveyance of all materials and all labour charges etc complete for Footings

VRCC (1:2:4) using 20 mm HBG m/c metal etc including cost and conveyance of all materials and all labour charges etc complete for plinth beams etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal etc including cost and conveyance of all materials and all labour charges etc complete for columns upto Basement etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal etc including cost and conveyance of all materials and all labour charges etc complete for columns above Basement etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal etc including cost and conveyance of all materials and all labour charges etc complete for lintels over doors etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal for Sun Shade of 0.60m width and 75 mm thick at Fixed end and 50mm thick at Free end etc including cost and conveyance of all materials and all labour charges etc complete

VRCC (1:2:4) using 20 mm HBG m/c metal including Cost and conveyance of the all materials and labour charges etc complete for Roof Beams etc

VRCC (1:2:4) using 20 mm HBG m/c metal icluding Cost and conveyance of the all materials and labour charges etc complete for slab etc

Brick Masonry in CM (1:6) with second class non modular or traditional size 23x11x7 cms including cost and conveyanc of the all materials and labour charges etc complete for Basement alround and Super Structure etc complete

Plastering with C.M. (1:3) 12mm thick including cost and conveyance of all materials. scaffolding charges, curing and all labour charges etc., complete.

Flooring with vitrified polished tiles 9 to 10mm thick Nano polished/stain free soluble salt porcelain screen printed of 600x600mm size 1st quality set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depth of slabs laid on already laid cement concrete bed set over base coat of CM (1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sqm and jointing to full depth of vitrified tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., complete

Providing skirting to internal walls to 15cms height/risers of steps with Vitrified tiles length equal to flooring stones , set over base coat of CM (1:5) 12mm thick with cement slurry spread at the rate of 3.30 kgs per sqm and jointing with white cement paste to full depth of polished slaabs including cost and conveyance of all materials and all labour charges, filling joints neatly, dressing etc., complete

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame etc including cost and conveyance of all materials and labour charges etc complete

Pinting to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coate in all give an even shade after throughly brushing the surface to remove all dirt and remains of loose powder materials , including cost and conveyance of all maerials to work site and all operational , incidental , labour charges etc complete for finished items of work.

Supply and fixing of Information Sign Board of Size 2' x 8' using painting of superior quality in required shade and colour of Acrilic emulsion paint including all labur charges etc complete

Supplying and Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mmx260mm etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of PVC low level systemwith internal components & short bend:10 Litres capacity Single Flush etc including cost and conveyance of all materials and all labour charges etc complete

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 etc including cost and conveyance of all materials and all labour charges etc complete

Supplying & Fixing of Europian ISI mark water closet etc complete Indian make conforming to IS:2556-1995 etc including cost and conveyance of all materials and all labour charges etc complete

Supplying and Fixing of best Indian make plastic seat and lid for europian water closet with rubber or plastic buffers as sper IS 2548-1996 etc including cost and conveyance of all materials and all labour charges etc complete

Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock etc including cost and conveyance of all materials and all labour charges etc complete

Supplying and Fixing of 110mm dia 3m single socket PVC/SWR pipe of 4kgf/cm2 etc complete etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings etc including cost and conveyance of all materials and all labour charges etc complete

Labour charges for laying, fixing and commissioning of 110mm dia PVC pipe including necessary fittings etc with solvent jointing as per standard practice etc including cost and conveyance of all materials and all labour charges etc complete

Supply and Fixing of 22.20mm OD Pipe of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physicalProperties for Hot and Cold Water (IS 15778:2007) etc including cost and conveyance of all materials and all labour charges etc complete

Machine cutting and Chiselling of Brick masonry for providing concealed water pipe line etc including cost and conveyance of all materials and all labour charges etc complete

Cost and Supply and fixing in position of ABS Plastic Two way Tap including cost and conveyance of all materials and all labour charges etc complete

Cost and Supply and fixing in position of Plastic Jet Spray Health Faucet with 1m PVC Flexible Hose and wall stand etc including cost and conveyance of all materials and all labour charges etc complete

Cost and Supply and fixing in position of PVC Angle Cock water tap with wall flange etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of 25mm dia 2mm thick PVC Pipe (ISI Mark) concealed in Roof Slab with all accessories including masonary work and cost and conveyance of all materials and all labour charges etc complete

Wiring with 2 of 14/0.3mm 91.0 Sqmm) Finolex PVC insulated F.R flexible copper cable (ISIMARK) in existing pipe with 6A switch control and 3/2 pin socket fixing on seperate board including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with eaarth continuity including wire leads, earth connection etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of 150 mm x 150 mm x 60 mm size 18 SWG Sheet Steel boxes duly finished with two coats of Zinchromate redoxide etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of Pendent Holder etc including cost and conveyance of all materials and all labour charges etc complete

Supply and fixing of 6 Sqmm ISI marked WPTC (Weatherproof Twin Core) ISI Aluminum Wire etc including cost and conveyance of all materials and all labour charges etc complete

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under 1. Quantity : 1, 2. Rated KVA: .160.KVA, 3. Service & Location: Continuous Outdoor istribution Transformer,4. Mounting: Plinth.,5. Wound: Copper Double wound,6. Type: Core type oil immersed,7. Cooling: ONAN, 8. Temp Rise: 40⁰C in oil, 45⁰C by resistance,9. Vector Group: Dyn 11,10. Primary Connection: Delta,11. Nominal Voltage / Current:,,12. Highest system Voltage: 12000V,13. Primary Frequency :50 HZ +/- 3%,14. Number of Phases: 3,15. Primary wires: 3,16. Secondary connection: Star,17. Secondary Volts / Current : 433V,18. Secondary phases: 3,19. Secondary wires: 4,20. Taps on primary winding for primary voltage variation: +5% to - 10% in steps of 2.5% of 7 position (6 Steps), 21. Terminal arrangement.a. HV: HT terminal box as per the site condition.,b. LV: Cable box suitable to receive ----Sq.mm XLPE cable,22. LV: One separate terminal for earthing.,23. Total Losses at 50% Loading [Watts] [Max] --- as per IS,24. Total Losses at 100% Loading [Watts] [Max]--- as per IS,25.Percentage pedance at 75 deg. C at -----as per IS,26. No Load current: Less than 2% of full load current.,27. Standard Fittings & Accessories.,a. Rating and terminal marking plate: One,b. Lifting Lugs: Two,c. Off-circuit tap switch: One.,d. Earthing Terminals : Two,e. Radiators (Attachable): Adequate,f. Explosion vent with Diaphragm : One,g. Conservator with Drain plug: one,h. Oil filling hole with cap :One,i. Oil level indicator: One,j. Dehydrating Silica gel Breather: One,k. Terminal Arrangement: HV With Terminal Box,l. Terminal Arrangement: LV Cable Box,m. Separate Neutral Bushing : One,n. Drain cum filter valve with blanking plate: One,o. Air release device: One,p. Thermometer Pocket: One,q. Four: Unidirectional flat rollers,r. One :10Cm dial thermometer (Rigid stem type) including all labour charges etc complete