Electrical Works with allied cabling work for Installation of Existing Disel Generator Set at the Hospital Campus of Hili Rural Hospital, Dist Dakshin Dinajpur.

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Legrand/Haggar/ABB/Siemens)

ii) 8 Way Enclosure (607717)

Supplying and fixing 240V SP MCB of Breaking apacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make-Legrand//Haggar/ABB/Siemens)

Supplying and fixing 240/415 V FP MCB Isolator on din rail of existing DBs and necessary connection. (Make- Legrand)

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)(Make- Havells, Item Code-IHBC020006)

a) 4 bar 415 V, 200A 4x20x5mm Cu Bar, 500x150mm Metal Box

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the 20mm size PVC rigid conduit FR(Precision make) incl. Necy fittings as required

ii)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i) 2.5 sq mm

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing 4 core compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a) 4 core 35 sqmm cable

b) 4 core 95 sqmm cable

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc.

a) 4 core 35 sqmm cable

b) 4 core 95 sqmm cable

S & D of 1.1 KV. Gr. armored XLPE/A Al. LT cable of following [Make: Havells/RR/Polycab/Finolex]

a) 4 core 35 sqmm XLPE/A Al. LT cable

b) 4 core 95 sqmm XLPE/A Al. LT cable

Laying of cable from 4 core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. i) 200A L&T

Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(For DG & Cold Chain Room)

Supply & Fixing of 200A kit kat rewireable fuse On Wooden plate.

(For DG Incommer RAW Panel) Supply,Installation,Testing & commissioning of cubical type panel,compartmentalized Wall mounted indoor type dust and vermin proof powder coated panel panel board ,suitable for 415V 3phase ,4wire ,50HZ ,ac supply of suitable size made out of 2mm thick MS sheet so as accommodate the following mounting complete with copper busbar of 250A capacity ,detachable gland plate,with suitable size 4mm thick MS channel frame at the bottom,with adequate size cu wire ,copper bar ,cu link cable connector etc along with necy nuts,bolts,clamps,grounting bolts incl providing and fixing the following accessoried etc complete as required .(all make L&T)

Incomer-- i) S/F of 415 Volts 200 SFU with 3Nos DIN type HRC fuse as per rating (Make-L&T)-- 02 Nos.

Outgoing-- i) S/F of 415 Volts 200A SFU with 3Nos DIN type HRC fuse as per rating (Make-L&T)-- 01 Nos ii) S/F of 415 Volts 63A SFU with 3Nos DIN type HRC fuse as per rating (Make-L&T)-- 01 Nos

BUS BAR c) do-do 250 Amp capacity 4 bar electrolytic tinned copper bus bar mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification --- 01 Set

Please Enable Macros to View BoQ information