PETTY REPAIR AND DAY TO DAY MAINTAINENCE IN ZONE A AT DEFENCE LABORATORY JODHPUR

Amount

Easing of door shutters for easy closing / opening by tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engineer-in-charge.

Easing of window shutters, kitchen cupboard shutters, show case shutters drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed by Engineer-in-charge.

Fixing only in repairs loosed wooden pelmet boxes in position by using plug/wooden gutties embedded in wall make good in CM 1:3 fixed with MS holder clips complete incl tightening of screws etc in all respect length of each pelmet box n exc 2.5Mtr complete all as specified and directed by Engineer-in-charge.

Fixing only in repairs the existing old loose butt hinges of any size & type at any location with new screws complete all as specified and directed by Engineer-in-charge.

S&F in repairs 50mm size double legged floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified & directed by Engineer-in-charge.

S&F in repairs 100 mm size Hasp and staple, aluminium anodised ,wire type,,including bolt to hinge plate and fixed with screws complete all as specified & directed by Engineer-in-charge.

S&F in repairs door closer hydraulically regulated designation No:-2 universal type of aluminium body fixed to door frames with screws or by welding complete all as specified & directed by Engineer-in-charge.

S&F in repairs, Brass chromium plated Tubular towel rail 20mm dia,D type, 60 cm long between flanges, complete all as specified & directed by Engineer-in-charge.

S&F in repairs stainless steel drawer handles,projection drop(50mm to 65mm)complete all as specified and directed by Engineer-in-charge.

S&F in repairs steel window handle (mild steel) with nuts & bolts complete all as specified and directed by Engineer-in-charge.

S&F in repairs steel window peg stay(mild steel) all as specified and directed by Engineer-in-charge.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutters & shelves and pelmet boxes etc complete all as specified and directed by Engineer-in-charge.

M&L 6 mm thick external teak wood lipping to block board or veneered particle board fixed with nails etc complete all as specified and directed by Engr-in-charge.

S&F in repairs19/20mm dia curtain rails, mild steel,chromium plated with fixing brackets, stop, rollers etc complete all as specified and directed by Engineer-in-chage.

S&F in repairs19/20mm dia curtain rails, mild steel,chromium plated complete all as specified and directed by Engineer-in-chage.

S&F in repairs bracket holders suitable for19/20mm dia curtain rails complete all as specified and directed by Engineer-in-chage.

S&F in repairs 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required complete all as specified and directed by Engineer-in-charge.

S&F in repairs 100 mm size Double action spring hinges,mild steel with steel wire spring,stove enamelled black complete all as specified & directed by Engineer-in-charge.

S&F in repairs 100 mm size single action spring hinges,mild steel with steel wire spring,stove enamelled black complete all as specified & directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

Fixing only in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.(Note:- wire cloth obtained from dismantling used in this item)

S&F in repairs 200 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge.

S&F in repairs 150 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge.

S&F in repairs 100 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-charge.

S&F in repairs 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-charge.

S&F100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-charge.

Fixing only in repairs the existing old loose handles of any size & type at any location with new screws complete all as specified and directed by Engineer-in-charge.

S&F in repairs 4mm thick Ply wood grade BWP type BB fixed with screws to timber frame complete all as specified and directed by Engineer-in-charge.

S&F in repairs 0.56 mm aluminium sheet fixed to door shutters with nails complete all as specified and directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description) from steel/wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified & directed by Engineer-in-charge.

S&F 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.

S&F 3mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.

S&F 4.80 mm thick, sheet glass ordinary quality and glazing with aluminium and rubber beading in squares pane exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.

S&F 4.80 mm thick, sheet glass ordinary quality and glazing with aluminium and rubber beading in squares pane not exceeding 0.50 Sqm in each panes complete all as specified and directed by Engineer-in-charge.

M&L in repairs 2nd class hard wood beads sectional area not exceeding 3 sq.cm in plain fillets. square,rectangular or triangular in section,clean swan,secured with nails or brads complete all as specified and directed by Engineer-in-charge.

Petty repairs to leakage water in bib taps,pillar taps,stop cock,angle valve, PVC connections,waste pipes, float valves,concealed stop cock, GI pipe joints, bottle traps etc by replacing of rubber washer cheek nuts plunges, spindle etc for any minor accessories to make the system functional complete all as specified and directed by Engineer-in-charge.

Petty repairs to high/low level flushing cistern by adjusting the float valve,leakage of PVC connection/ GI or PVC bend including replacing of rubber washer cheek nuts plunges etc for any minor accessories to make the system functional complete all as specified and directed by Engineer-in-charge.

S&F in repair bib taps cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. (Cat part No:-PIS-06H of PRAYAG or equivalent as approved by AGE(I) )

S&Fin repairs, long body, brass chromium, fancy type, bib taps, with crutch or butter fly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.(Cat part No:-PIS-08H of PRAYAG or equivalent as approved by AGE(I) )

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. (weight not less than 90 grams (Cat part No:-121 of PRAYAG or equivalent as approved by AGE(I) )

S&F in repair pillar taps, cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified & directed by Engineer in charge..(Cat part No:-PIS-02 of PRAYAG or equivalent as approved by AGE(I) )

S&F in repairs brass CP wash hand basin mixer for mixing hot & cold water screwed down for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge. (Cat part No:-8375 of PRAYAG or equivalent as approved by AGE(I) )

S&F in repairs brass CP wall mixer for mixing hot & cold water screwed down for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge. (Cat part No:-8350 of PRAYAG or equivalent as approved by AGE(I))

S&F in repairs brass CP sink mixer for mixing hot & cold water screwed down for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge. (Cat part No:-8255 of PRAYAG or equivalent as approved by AGE(I))

S&F in repairs stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed by Engineer-in-charge.

S&F in repairs brass CP angle valve screwed down for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge. (Cat part No:-7210 of PRAYAG or equivalent as approved by AGE(I))

S&F, in repairs gun metal globe or gate valve, with iron wheel head, screwed both ends for 15 mm bore iron pipe complete all as specified & directed by Engineer-in-charge.

S&F, in repairs gun metal globe or gate valve, with iron wheel head, screwed both ends for 20 mm bore iron pipe complete all as specified & directed by Engineer-in-charge.

S&F in repairs, ball valves for 15 mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as directed by Engineer-in-charge. (minimum weight 142 gms) (Cat part No:-151 of PRAYAG or equivalent as approved by AGE(I))

S&F, in repairs ball valves for 20mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as directed by Engineer-in-charge. (minimum weight 210 gms) (Cat part No:-152 of PRAYAG or equivalent as approved by AGE(I))

S&F, in repairs ball valves for 25mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as directed by Engineer-in-charge. (minimum weight 455 gms) (Cat part No:-153 of PRAYAG or equivalent as approved by AGE(I))

S&F in repair PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC connections 600 mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

S&F in repair brass chromium plated shower rose with shower arm 125mm long & bend of 45 degree with flange complete all as specified & directed by Engineer-in-charge.

S&F in repair swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms) all as specified & directed by Engineer-in-charge.

S&F in repairs 32 mm size brass chromium plated waste fitting for wash basin /sink complete all as specified & directed by Engineer-in-charge.

S&F in repairs 40 mm size brass chromium plated waste fitting for wash basin /sink complete all as specified & directed by Engineer-in-charge.

S&F in repairs 32 mm size PVC waste pipe of suitable length for kitchen sink /wash basin complete all as specified & directed by Engineer-in-charge.

S&F in repairs 40 mm size PVC waste pipe of suitable length for kitchen sink /wash basin complete all as specified & directed by Engineer-in-charge.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, complete all as specified and directed byEngineer-in-charge.

S&F in repairs 125mm/ 100mm/75mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:3 complete all as specified and directed by Engineer-in-charge.

S&F in repairs brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connections including necessary packing, union and cap complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous china squatting pan "Orissa" pattern, size 580 x 440mm white, with integral foot rest (Excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe,lime/cement concretebedding and making good to the floor complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china wash down water closet pan/ padestal(EWC) including plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S&F in repairs white/ black plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass, chromium plated, pvc waste pipe, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as sockets for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as elbow for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as nipple for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as tee for 15 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as union for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as sockets for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as elbow for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as nipple for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as tee for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as union for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as reducer for 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as sockets for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as elbow for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as nipple for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as tee for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as union for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs small fitting of galvanised iron medium grade such as reducer for 25 mm bore pipe complete all as specified and directed by Engineer-in-charge.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as directed by Engineer-in-charge.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as directed by Engineer-in-charge.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed by Engineer-in-charge.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed by Engineer-in-charge.

Fixing only old GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed by Engineer-in-charge.

Fixing only old GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed by Engineer-in-charge.

Dismantling of old unserviceable PVC water tank of 500 Ltrs capacity complete all as specified and directed by Engineer-in-charge.

S&F 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and directed by Engineer-in-charge.

Dismantling of old unserviceable PVC water tank of 1000 Ltrs capacity complete all as specified and directed by Engineer-in-charge.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and directed by Engineer-in-charge.

Demolition of hearth and wall tiling including cement morter screed bed or backing coat and removal unserviceale materials,debries and rubbish to a distance not exceeding 100 m complete all as specified and directed by Engineer-in-charge.

M&L non-skid ceramic coloured tiles of 7 to 8mm thick, (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and directed by Engineer-in-charge.

M&L glazed ceramic coloured tiles of size 350mmx250mmx 7mm thick/450x350x7 mm/450x300x7mm on vertical surface such as walls, skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

S&Fin repairs cabinet mirror for bath room size 600x450 mm of make prayag complete as specified and directed by Engineer-in-Charge.

S&Fin repairs 300mm long Aluminium alloy,anodised, sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded section and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Engineer-in-charge.

S&F in repair, stainless steel soap dish of standard size (As per sample kept in AGE B/R-I office) fixed with chromium plated screws all as specified & directed by Engineer-in-charge.

M&L 18/20mm thick granite mirror polished stone slab machine cut bedded and jointed with grey cement slurry and pointed with white cement or coloured cement to match the colour of granite as in flooring over 15mm thick screed bed in cement mortar (1:4) all as specified & directed by Engineer-in-charge.

Supply and fix 30 mm wide (width of flaps when open) continuous (paino) hinges,mild steel,bright finish or electrogalvanised complete all as specified and directed by Engineer-in-charge

Taking down cement or cement lime plaster, any description on brick or stone walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc removal of rubbish off the premises, removal and depositing where directed and leaving the more clean of any plastering complete all as specified and directed by Engineer-in-charge.

M&L 15 mm thick , plaster in cement mortar (1:4) on stone / brick masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement in patches complete all as specified & directed by Engineer-in-charge.

M&L preparation of newly plastered surfaces of walls and applying two coats of distempering oil emulsion over a coat of primer and one coat of wall putty to get a uniform smooth surfaces all as specified & directed by Engineer-in-charge.

M&L rendering 5 mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement in patches complete all as specified and directed by Engineer-in-charge.

M&L preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors,kota stone,granite flooring,tiles flooring and pavings not exceeding 15 cm thickness (below or above ground level) and removal unserviceale materials,debries and rubbish to a distance not exceeding 100 m complete all as specified and directed by Engineer-in-charge.

M&L 40mm cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate in floors finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Supply only 38 mm wide & 3mm thick glass dividing strips complete all as specified & directed by Engineer-in-charge.

Racking out joints/ pointing to rendom rubble or polygonal rubble uncoursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or uncoursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed by Engineer-in-charge.

M&L keyed pointing in cement mortar (1:3) to squared rubble masonry, Jodhpur type, coursed or un coursed complete all as specified & directed by Engineer-in-charge.

M&L preparing new or old plastered / pointed surfaces of walls and applying two coats of water based paint (exterior emulsion) over a coat of primer complete all as specified & directed by Engineer-in-charge. (APEX from Asian or equivalent make).

M&L cutting or grinding surfaces of old kota stone/terrazzo flooring, skirting, dados,etc with carboredom stone by hand or grinding machine,dusting off the surfaces after grinding and finally washing the surface clean with oxalic acid solution and polishing with bees wax ploish complete all as directed by Engineer-in-charge.

S&F in repairs, vertical type 100 mm size 2 lever brass mortice lock with 2 Nos keys complete all as specified & directed by Engineer-in-charge. NOTE FOR ABOVE WORK:- Note. 1 :- The contractor or his represantative will report in complaint cell with one plumber, carpenter and helper to receive the complaints in the morning by 0900hrs with necessary daily stores as required to attend day to day complaints. Note.2 :- The contract will be made operational for 11 months. Note.3 :- The complaints should be attended /competed within 48 hours after receiving the complaint slip failing which a penalty of Rs. 500/- will be recovered for each complaint from the contractor payment. Note No. 4 :- The cost of plumber & carpenter should be deemed to be included in the item rates quoted by the contractor. Nothing will be paid extra for hiring the skilled labour.

HOODA CONSTRUCTION COMPANY

SNEH CORPORATION

M/S JALAL KHAN

shri prabhu construction

Rajendra Engineering Works