-Maintenance of farm store room and godown

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

OD672/2026-2027:Modified 15.26 Demolishing and removing the existing wooden planks laid in the godown floor, including stacking of serviceable materials and disposal of unserviceable materials within a lead of 50 metres, complete as directed by the Engineer-in-Charge.

OD675/2026-2027:Modified 22.1.1"Providing anti-rodent and pest control treatment to floor surfaces and wall-floor junctions by drilling holes in the floor at approximately 1.0 m centre-to-centre intervals and injecting/pouring approved anti-termite/pest control chemical emulsion in the specified quantity, including sealing of drilled holes after treatment, application of approved chemicals, rodent repellents, baiting agents and other control measures, complete as per manufacturer's specifications and directions of the Engineer-in-Charge."

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

OD668/2026-2027:Modified 50.9.11.2 Providing and fixing 18 mm thick Thomson Multi Wood Board or approved equivalent make paneling to the existing frame, backing or studding, including cutting the board with a router machine to provide a 5 cm overlap on all four sides, and securing it with screws, fisher fasteners and all necessary accessories. The work shall include all materials, labour, cutting, fitting, alignment and finishing required for the proper completion of the paneling. The cost of frames, backing or studding shall be measured and paid for separately. The work shall be carried out complete in all respects as directed by the Site Engineer-in-Charge.

OD671/2026-2027:Modified 50.9.11.1 Providing and fixing 12 mm thick Thomson Multi Wood Board or approved equivalent make paneling to the existing frame, backing or studding, including cutting the board with a router machine to provide a 5 cm overlap on all four sides, and securing it with screws, fisher fasteners and all necessary accessories. The work shall include all materials, labour, cutting, fitting, alignment and finishing required for the proper completion of the paneling. The cost of frames, backing or studding shall be measured and paid for separately. The work shall be carried out complete in all respects as directed by the Site Engineer-in-Charge.

OD674/2026-2027:Modified 14.85 "Taking out existing wooden door shutter, repairing the shutter by cutting, fitting, painting and other necessary works, and refixing the repaired door shutter to the existing door frame, including replacement of hinges with screws wherever required. The item shall also include providing and nailing/fixing aluminium sheet on one side of the door shutter up to a height of 50 cm from the bottom for protection against rodents, complete in all respects and as directed by the Engineer-in-Charge."

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work