Development of road from Tarun Sangha Club to Bishalgarh Rail Station approach (upto Abdul Khalek House) via Netajinagar Kalimandir (Total Length_1point05 km)_SH_ Flat Brick soling, GSB, WBM_III, RCC Drain, Protection Work and Paver Block work etc

Brick Soling. ii)Flat Brick soling. Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.

Granular Sub-base with Well Graded Material (Table 400.1) using Jhama Brick Aggregate. (A) By Mix in Place Method Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, Grading-I, as per Table 400.1, spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401. (i) For Grading - I Material (jhama brick aggreate)

Water Bound Macadam Sub-Base / Base using Jhama Brick Aggragate . WBM Grading - 3 Providing, laying, spreading and compacting Jhama Brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density 'Grading 3' as per MoRD Technical Specification Clause 405. A)By Manual Means

Excavation for Structure. A. Without dewatering. Earth work in excavation for structure as per drawing and MoRD technical specification clause 305.1 in/c setting out construction of shoring & bracing removal setting out construction of shoring & bracing removal of stumps & other deleterious materials and disposal upto a lead of 50m dressing of sides & bottom and backfilling in trenches with excavated suitable materials. I) Ordinary soil. (i)upto 3.0m depth.

Filling in foundation trenches as per drawing & MoRD technical specification clause 305.3.9, 1200. I) Sand filling.

Providing concrete for plain concrete(using jhama brick agg) in open foundation complete including form work as per drawing & MoRD technical speciification clause 802,803, 900,1202 and 1203 (in/c centering shutering staging etc but ex/c reinforcement .I) PCC Grade M-10 (using jhama brick agg) (i)Nominal mix 1:3:6 .

Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement). IV)R.C.C grade M 20

Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202.

80 mm thick factory made c.c. interlocking paver block of M-35 Grade. Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.