8446/E8 REPAIR AND MAINT OF WATER TREATMENT SYSTEM, LT PANELS, XLPE UG/SUBMERSIBLE CABLE, EARTHING AND ALLIED WORKS OF WATER SUPPLY AT GARUD GARRISON UNDER GE (EAST) BAREILLY

Amount

Supply only Calcium based granular hypo chlorite 65% to 70% disinfectant for water treatment ,Packing in 45 KG ,plastic drums complete all as specified and directed .

Supply only Alum Ferric (Grade-4) (best quality as per sample) for purification of water (containing lead (as PB) 30 ppm Max and arsenic 6 ppm Max) confirming to IS-299/2012 (Revised) as amended upto date complete all as specified and ddirected by Engineer-in-Charge. (Note :- The Alumino Ferric Sulphate shall be supplied in superior quality bricks (slabs) as per IS specifications. Manufacturers Name/trade mark shall be engraved on each brick (slab) in addition to marking of relavant clause of IS specification).

Taking out connection of Chlorine / Altoch dosing system , detecting fault and repair /replacement of unserviceable parts and refixing same after completion job and connecting dosing system and testing complete all as specified and directed.(NOTE:- Minor spare shall be deemed to included in quoted rate other Spares parts shall be measured and paid separately as Supply only ) as under :

Supply only rotor assembly with bearing brackets and tolerance rings suitable for decree dosing pump complete all as specified and directed.

Supply only pump tube suitable for dosing pump complete all as specified and directed.

Supply only injectior assembly suitable for dosing pump complete all as specified and directed.

Supply only duckwill suitable for dosing pump complete all as specified

Supply only diaphragm assembly suitable for dosing pump complete all as specified

Supply only weighted suction line stainer suitable for dosing pump complete all as specified and directed.

S&F PVC pipe for dozing plant as per existing size of 6 mm dia complete all as specified and directed

Supply only NRV 15mm size for dising pump of capacity 7 kg/Cm 2 complete all as specified and directed

Supply only Agitator Motor electric driven 230 Volt 50 Hz,single phase,120 W & 900 RPM copper wounded complete all as specified and directed.

Supply only PVC pipe as per existing size all as specified, 25 mm dia

Supply only grass and weeds killer chemical of make Roundup all as specified and directed.

Supply & installation in replacement electrically operated including High pressure Single head Gear motored adjusable Dosing Pump set, Modle:-96 NGQ51, Item NR:- DPP965, uneffected on dry running having no loss of prime, independent of back pressure and able to handle both chemical solution as well as suspension, 230volts, 50 cycles, AC,44 RPM 1/30 fraction HP having output 2US GPD to 40 U.S GPD complete with accessories i.e lead tubing , connecting nuts, injection check valve, clay weight and ferrules including complete all as specified and directed by Engr-in-charge. Make :- Dosing pump :- Declibac Modle :-96 NGQ51, Item NR:- DPP9651 or Equivalent in poter & Watt Crop/Briozing Unlimited.

M&L for preparation of old concrete/plastered surfaces by scrapping , brooming etc and applying two coats of exterior emulsion weather proof paint (Apex of Asian paints or equivalent) over dome, wall, columns ,beams including applyng two coats of synthetic enamel paint on all pipe lines etc of overhead reservoir using scaffolding & necessary safety precaution complete all as specified and directed for the following RCC over head reservoir:- (a) RCC overhead reservoir 100000/50000/25000 gallon capacity, 50 to 60 feet staging. Note :- Colour status shall be as under :- (i) Rising main - Blue colour. (ii) Delivery main - Green colour. (iii) Washout main - Red colour. (iv) Overflow main - Yellow colour.

M&L for preparation of old concrete/plastered surfaces by scrapping , brooming etc and applying two coats of exterior emulsion weather proof paint (Apex of Asian paints or equivalent) over dome, wall, of semi under ground sump capacity 50000/100000 Gallon including applyng two coats of synthetic enamel paint on all pipe lines etc of reservoir using complete all as specified and directed

M&L earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.0mm thick burried directely in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate at a depth not less than 1.5m below normal ground level connected to and including earth lead of GI strip 32 x 6 mm by means of bolts, nuts and check nuts and washers etc made of GI and connected to Earthing test point and earth dolly all as shown in elect plate No3 SSR Pt-I including all necessary excavation earth work, PCC chamber, chamber cover with handle (PCC 1:2:4) including 40mm dia protection pipe and 20mm dia watering pipe and wire mesh funnel etc complete all as specified and as directed including earth work

M&L for dismantling of motor, 3 phase, 5/7.5, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump and rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plate etc complete as specified and directed.

M&L for dismantling centrifugal/monoblock pump set of capacity 5/7.5 HP and taking out unsv spares and and replacement of bearing,bush, packing impeller, fan balde , necesary lath work as per existing make and modal complete all as specified and directed

M&L for dismantling centrifugal/monoblock pump set of capacity 2/3 HP and taking out unsv spares and and replacement of bearing,bush, packing , Shaft , impeller, fan balde , necesary lath work as per existing make and modal complete all as specified and directed

-ditto- all as per item Ser No. 21 but monoblock electric motor of capacity 2/3 HP

-ditto- all as per item Ser No .21 but monoblock electric motor of capacity 30 HP

M&L for servicing / maintenance of air compressor machine 415 volts 50 Hz motor complete with cleaning of air tank incl replacement of all defective parts and lubricating oil , packing , Gear wheel, O ring, seal, Belt etc complete all as specified and directed.

S&F in replacement fully automatic Star Delta Starter , 415 Volt three phase suitable for 10 HP Centrifugal pump set complete all as specified and directed.

S&F in replacement DOL Starter , 415 Volt three phase suitable for 5 HP Centrifugal/Monoblock pump set complete all as specified and directed.

S&F in replacement fully automatic Star Delta Starter , 415 Volt three phase suitable for 30 HP Centrifugal pump set complete all as specified and directed.

Supply and fixing 1.0 sq mm 4 Core copper cable complete all as specified and directed.

Supply and fixing 1.5 sq mm 6 Core copper cable complete all as specified and directed.

Supply and fixing 1.5 sq mm 2 Core copper cable complete all as specified and directed.

Supply and fixing pressure Transmitter with accessories and sensor complete all as specified and directed.

Supply and fixing Ultrasonic Level Transmitter with sensor complete all as specified and directed.

Supply and fixing 100 mm dia, single phase, motor actuated butterfly valve with disc material of CI with nylon coated complete all as specified and directed.

Supply and fixing 150mm dia, single phase, motor actuated butterfly valve with disc material of CI with nylon coated complete all as specified and directed.

Supply and fixing 200mm dia, single phase, motor actuated butter fly valve with disc material of CI with nylon coated complete all as specified and directed.

Supply and fixing ARM7 based CPU card of RTU complete all as specified and directed.

Supply and fixing AI card of RTU complete all as specified and directed.

Supply and fixing DO card of RTU complete all as specified and directed.

S& F in replacement submersible pump / motor electric driven 415 Volts , TP suitable for 200/250 mm bore well casing pipe size 200/250 mm supply complete of 40 HP, Discharge 2700 LPM Head 60 Mtr , Dia 200 MM all as specified and directed.Note:- Old unsv will be deposited in MES store

Supply and fixing DO termination PCB of RTU complete all as specified and directed.

Supply and fixing DI termination PCB of RTU complete all as specified and directed.

Supply and fixing Keyboard and display unit of RTU complete all as specified and directed.

Supply and fixing Panel interface relay 230 Volt AC 4 C/O complete all as specified and directed.

Supply and fixing Panel interface relay 230 Volt DC 4 C/O complete all as specified and directed.

Supply and fixing 12/12/5 V DC SMPS of model I RTU 9000 complete all as specified and directed.

Supply and fixing 32 TPN class C, MCB complete all as specified and directed.

Supply and fixing 100 AH , SMF Battery inverter complete all as specified and directed.

Supply and fixing PPM sensor Potentiostatic electrole with following features. (a) Electrodes -:2 platinum ring (b) Referance- Gel with annual junction (c) Body glass (d) Max presuure-: 10 Bar @ 20 degree C make as approved by E-in-Cs Br.

S&F Mild steel Butterfly valve 100 mm complete all as specified and directed.

S&F Mild steel Butterfly valve 50 mm complete all as specified and directed.

S&F Cartridge for Iron removal plant suitable for capacity of 10000 Gln/hr complete all as specified and directed.

Supply & installation in replacement electrically operated including High pressure Single head Gear motored adjusable Dosing Pump set, Modle:-96 NGQ51, Item NR:- DPP965, uneffected on dry running having no loss of prime, independent of back pressure and able to handle both chemical solution as well as suspension, 230volts, 50 cycles, AC,44 RPM 1/30 fraction HP having output 2US GPD to 40 U.S GPD complete with accessories i.e lead tubing , connecting nuts, injection check valve, clay weight and ferrules including complete all as specified and directed by Engr-in-charge. Make :- Dosing pump :- Declibac Modle :-96 NGQ51, Item NR:- DPP9651 or Equivalent in poter & Watt Crop/Briozing Unlimited.

M&L for dismantling of motor, 3 phase, 7.5 KW, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump and rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plate etc complete as specified and directed.

M&L for dismantling of motor, 3 phase, 10 KW, taking out burnt winding wire from stator, cleaning all slots properly, repair of pump and rewinding the motor with proper guage of super enamelled winding wire and varnishing properly including baking and providing insulation and packing properly re-assembling the motor with pump and installed at its proper position and testing the same including connection plate etc complete as specified and directed.

Dismantling and Taking Out old U/S LT Busbar chamber and Supply, installation, Commissioning and testing LT Busbar chamber,size of 900x900x600 mm for 3 phase, 6 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 25mm x 25mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces mounting of angle iron of size 50 x 50 x 6mm complete with separate compartment of suitable shape and size with shutter and locking arrangement and including PCC work for fixing panel legs and bus bar Copper 4 Nos conductor suitable shape and size , of 200 amps rating including MCCB 200 Amps as Incomer and outgoing taking out end connectinons of the existing cables and fixing the cable with the panel using new lugs and glands of suitable size.

M/S SRIDEVI ENTERPRISES (BID ID -3432899)