CA NO. CWE BLY/GE(E) /30 OF 2021-2022 Special repairs to Bldg No. P-29 OR Md Accn and provn of open Shed for parking Scooter/Motor Cycle at Bareilly under GE(E) Bareilly

Amount

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors ./ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry of any description & in any position built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of Plain Cement Concrete of any description,lime concrete or PCC asbedding layer of waterproofing treatment and in any position including disposal of mateial complete all as specified and directed.

Dismantling galvanised sheet (Corrugated or Semi Corrugated etc) Sheets in roof convering etc including ridges complete all as specified and directed.

Dismantling structural steel work of any description and in any position including doors, gates but including framed truss etc. complete all as specified and directed.

M&L providing Plain Cement Conrete, type B-1, (1:2:4) Mix (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps, seismic, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60 cm in height, copings, benching, kneelers, apex, stone bed plates, water troughs and the like including weathering slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L Plain Cement concrete (1:5:10), type E2, (using 40 mm graded stone aggregates) as in mass concrete, filling in sunken portions etc. complete all as specified and directed .

Supply only Integal water proofing compound

M&L for Fly Ash Brick work with old size bricks having crushing strngth not less than 75kg/Sqcm, straight or curved on plan built in cement mortar 1:6 complete all as specified & as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.50 Sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Ditto all as per item No 11 above but area exceeding 1.5 Sqm & not exceeding 4 sqm each.

Taking down shutters of any description and in any position exceeding 1 Sqm & not exceeding 2 Sqm each complete all as specified and directed.

M&L for second class hard wood (SAL), Plain, Solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for Glazed and Skeleton shutter, 35 mm thick of 2nd class HW(SAL), open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutter as specified in SSR Pt-I, Section 8, clause 8.24(a) supplied & fitted to chowkhats complete all as specified and directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet 5 mm thickness to be fitted in MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F decorative type drapery rod (DDR) 25mm nominal dia having wall thickness not less than 1mm fixed in repair including pair of suitable holder /brackets, curtain rings complete all as specified and directed.

S&F Stainless Steel Wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

-Ditto-all as per item No 20 here-in-before but fixed in repair complete all as specified and directed.

S & F butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified.

S&F butt hinges, 100 mm, type C-21, of extruded aluminum alloy with galvanized mild steel hinges pin anodized and fixed complete all as specified and directed.

S&F 150 mm size Mild Steel Pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F aluminum handles, cast type, anodized of 150 mm size complete all as specified and directed.

S&F MS sliding door bolt of 250 mm length plate type, stove enameled black with bright bolt not less than 12mm dia with and including a min of 6 bolt and nut, four on bolt plate and two staple plate complete all as specified and directed.

S&F aluminium alloy, anodized sliding door bolt of 250 mm length with hasp and staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S&F aluminum anodized, 150 mm size, barrel tower bolt of extruded section & fixed complete all as specified and directed.

S&F Mild Steel barrel tower bolt, stove enameled black with bright bolt of 150 mm size complete all as specified and directed.

S&F MS Box type Steel windows (Double Shutter) with Pressed steel frame (dimension- 95X45X1.25 mm ),with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutter with glazing bars( out side shutters) and wire gauged openable shutter without glazing bars ( inside shutters ), dovetailed or welded complete all as specified and directed & shown on Drg No- TD/088 dt 07 Jan 2002.

Ditto all as per item No 30 above but as in ventilators, bottom portion fixed type glazing, and top portion with top hung wire gauge shutter dovetailed or welded complete all as specified and directed& shown on Drg No- TD/088 dt 07 Jan 2002.

M&L for Bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and Pintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles ,including drilling holes , conforming to Fe-310-o or Fe-410-o complete all as specified & as directed.

M&L for framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-410-o or Fe-310-o completeall as specified& as directed.

M&L for 18/19mm Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in Shelves/ Shutter of cupboard, including necessary lippiing with 20 x 6mm 1st of HW complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 to 8 thick on vertical surfaces such as skirting, dados, & riser to steps, set & jointed in neat cement slurry & pointed in coloured cement to match the tile colour laid over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in matching colour over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in matching colour over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for factory made, Rubber moulded, Chequered cement concrete tiles 25 cmx25cmx20 mm thick over and including 15 mm thick cement screed in 1:6 CM , set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab floor including rubbing and polishing over and including 20 mm thick screed bedding in CM (1:4) complete all as specified and directed.

M&L for 40 mm thick PCC , (1:2:4) type B1 ( using 20 mm graded stone aggregates ) finished even & fair without using extra cement as in floor etc. complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 25 mm thick, PCC (1:2:4), type B1,(Using 20 mm graded aggregates) as in floor mixed with integral waterproofing compound @ 2% by weight of cement & top finished even & smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC , (1:3:6) Mix, type C2, (using 40mm graded stone aggregates) as in plinth protection, finishing the surfaces even and smooth w/o using extra cement including forming & filling expansion joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down cement plaster of any description on walls including raking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "Supply only")

Ditto all as per srl item No 46 but 15 mm thick on fair faces W/O using WPC complete as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying 2 coats of oil bound distemper over a coat of alkali resistant primer and one coat of Birla putty 1 mm thick on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of the old decorated surfaces & applying one coat of white wash on surfaces of ceiling complete all as specified and directed.

M&L for complete removal of existing treatment of the old decorated surfaces of walls & applying 2 coats of Oil bound distemper over a coat of alkali resistant primer including one coat of birla putty on wall surfaces complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M&L for applying two coats of cement base paint on walls including complete removal of existing treatment. complete all as specified and directed.

M&L for preparation of the old plastered / decorated surfaces of walls by rubbing down with sand paper to have even and smooth surface & applying 2 coats of exterior emulsion paint (Apex) ( Weather coat) over a coat primer complete all as specified and directed.

S&F 4 mm thick, figured glass, Pin head type and glazing with oil putty in squares not exceeding 0.50 Sq.m. in each pane complete all as specified & directed.

S&F 4mm thick, Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass of any thickness and any description from wooden frames or stone , concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed.

M&L painting to steel surfaces exc 10 cm width or girth with applying two coats of synthetic enamel paint over a coat of red oxide primer including prepration of newly or previously untreated surface complete all as specified and directed.

M&L for preparation of old decorated steel surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wood & wooden surfaces of any description over 10 cm width / girth & applying 2 coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm bore tube of any description & in any position complete all as specified and directed.

M&L for galvanised mild steel water tubing 15 mm bore, medium grade, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection of 20 mm bore tube of any description & in any position complete all as specified and directed.

M&L for galvanised mild steel water tubing 20 mm bore, medium grade, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&Lfor 40 mm nominal bore Mild steel galvanised water tubing , medium grade , cut to shape and size in short lengths as in spouts and fixed in position complete all as specified.

S&F in repairs Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle, fancy type, long body, CP,with wall flange & capstan head for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .Cat No 0047 manufactured by M/s L&K or equivalent model manufactured by M/s Jaquar or Essess

S&F in repairs Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup (concealed type ),with wall flange & capstan head,screwed both ends for iron pipes or for union , for 15 mm bore complete all as specified and directed. Cat No 0077 manufactured by M/s L&K or equivalent model manufactured by M/s Jaquar or Essess

S&F in repairs angle cock,cast copper alloy,with wall flange,screwed down,high pressurewith capstan head,fancy type,chromium plated for 15 mm bore of pipe complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550 x 400 mm including pair of CI brackets, CP waste coupling, PVC waste pipe including taking out existing WHB and fixing the WHB in repair including making good the disturbed surface to match with existing surfaces complete all as specified and directed. Note :- Pillar tap shall be measured seperately as "Supply only"

M&L PVC connections, 15 mm bore size, with PTMT nuts of length 450 mm complete all as specified and directed.

Supply only Pillar taps, cast copper alloy , with capstan head, chromium plated , Fancy type screwed down for 15 mm bore pipe,high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified ( Note :-Weight shall not be less than 600 gm each )

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc complete including taking down existing WC & fixed new WC in repair including making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S&F Vitreous China valveless , syphonic action type , flushing cistern, 10 litres capacity , low level , white , with inlet , ball valve , float and handle including suitable brackets and connection to flush pipe , fixed in repairs , complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495mmx460mm with bowl size 410mm x330mm x160 mm complete all as specified and directed.

S & F in repairs kitchen plate rack made out of 1 mm thick stainless steel of size 90 Cm X 90 Cm X 25 Cm with all integral fittings and compartments/ partitions all as per sample kept in GE office complete all as specified and directed.

S&F in repairs PVC (SWR), Floor trap , 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

Taking up or down old existing pipes, of any bore, of any description and in any position (AC / PVC/SWR) single socketed in any length with rubber ring complete all as specified and directed.

S&F PVC (SWR) pipes, 75 mm bore, single socket, in any length with rubber ring joints fixed to walls with clamps complete all as specified and directed.

S&F PVC (SWR) pipes, 110 mm bore, single socket, in any length with rubber ring joints fixed to walls with clamps complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore, any radius complete all as specified and directed.

S&F PVC (SWR) bends, 75 mm bore, any radius complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity 250 litres but not exceeding 500 litres complete all as specified

S&F Rotational moulded poly-ethylene multi layer water storage tanks (cylindrical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified in SSR & as directed.

Ditto all as per item No 87 here-in- before above but fixing only including Tasala cover with fixing Nuts & Bolts.

S&F in repairs, Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed complete all as specified & as directed.

S&F in repairs Brass ,Chromium plated Tubular towel rail, 20 mm dia ,'D' type , 60 cm long between flanges , of approved make , complete all as specified & as directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal, 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) reduicer,110 mm bore, complete all as specified and directed.

S&F in repairs Shower rose brass chromium plated without swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed.

S&F rolled mild steel channel , angle, or tee sections, fixed independently, without connecting plate, etc. Fe-410w A quality as (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperately under appropriate item of Sch 'A' as "Supply only")

M&L for taking down existing roof treatment and wire brushing and cleaning top surfaces of tile or cement concrete over roof slab including flashings and junctions of parapets etc sweeping, cleaning and washing down with water etc complete all specified and directed

M&L for preparation of roof surfaces to recieve water proofing treatement , applying a coat of hot bituminous primer @ 0.30 Kg / Sqm and applying a coat of bitumen 85/25 @ 1.20 kg / sqm , Supplying and laying water proofing treatment with using Polymeric water proofing membrane of weight not less than 3 Kg / Sqm consisting of 100 micron HMHDPE film centre core including applying a coat of bitumen 85/25 @ 1.20 kg /Sqm on the top surface of membrane and finally finishing the top surfaces with applying a coat of Aluminium paint @ 0.20 Litres per Sqm complete as per manufacturer's instructions and torch application on membrane with 10cms overlaps where required complete all as specified and directed .

M&L for Precast PCC tiles, 25cm x 25cm x 22mm thick, laid on 15 mm thick screed in cement mortar 1:4 and joints grouted in cement mortar 1:3 on top of membrane surface complete all as specified and directed

M&L for cleaning existing surface,watering,curing and applying a coat of Tapecrete solution mixed with cement in prescribed ratio as per manufacturers instructions complete all as specified & as directed.

M&L for waterproofing treatment to sunken portion of WC, Bathroom etc by applying cement slurry mixed with Acrylic Based Polymer modified cementious composited compound coating as under :- First layer of cement @ of 0.488 Kg per Sqmtr mixed with Acrylic Based Polymer modified cemention composited compound @ 0.253 Kg per Sqmtr. This layer will be allowed to air cure for 4 hours and Second layer of slurry of cement @ 0.242 Kg per Sqmtr mixed with Acrylic Based Polymer modified cemention composited compound @ 0.126 Kg per Sqmtr and allowed to be air cure for 4 hours including preparation of surfaces and sealing all joints, corners, junctions, pipes and masanry with Polymer mixed slurry. (Treatment will be allowed with water curing for 48 hours)

Surface dressing n exc 15 cm deep in hard /dense soil complete all as specified and directed.

M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for 100 mm thick PCC , (1:4:8) mix,type D-2, (using 40mm graded stone aggregates) as in sub base for floor complete all as specified and directed.

M&L Plain Cement Concrete 1:4:8 mix, type D2(Using 40 mm graded crushed stone aggregates) as in foundation filling & mass concrete complete all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 60mm thick , Precast concrete interlocking paver blocks , of triangular / Zigzag / Haxagonal shape as approved, ,with grey cement and pigment , having crushing strength not less than 300 Kg / Sqcm and conforming to IS- 15658-2006 , laid over and including a layer of 50 mm thick sand cushion including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed.

Excavation in post holes or similar holes in hard /dense soil,each n exc 0.50 cum , getting out, returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm , watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified.

S&F rolled mild steel in roof trusses (framed) trussed purlins,crane gantries,rails and fastenings and heavy bracketsframing (angle, channel,beam,tee,tubular pipe,channel or flat section etc.) including distance pieces, cleats, hold fast etc. conforming to Gde of steel Fe 410-W (Gde-E250) quality-B complete all as specified and directed.

S&F rolled mild steel Plates ( Plain or chequrred ),channels,squarecut or notched (ordinaryandcounter sunk),forming holes,without any attachments etc. conforming to Gde of steel Fe 410-W (Gde-E250) quality-B complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

E&M Part: Taking down carefully copper/aluminium point wiring light, fan, socket or power point complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, bell push, bell buzzer etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down sub main wiring (any no of runs) including earth wire/service connection and making good distrubed surfaces to match with the existing surfaces of walls including removing from site complete all as specified and directed.

Taking down and disconnecting ceiling/exhaust fans and removing to MES store yard including transportation complete all as specified & as directed.

Taking down and disconnecting electric meter and removing to MES store yard including transportation complete all as specified & as directed.

Taking down existing unserviceable main switch/ cut out/ DBs of any type & capacity including making good distrubed surfaces to match with the existing surfaces of walls complete all as specified and directed.

M & L for point wiring with 1.5 Sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch down through and including PVC concealed conduit with all accessories including 1.0 Sqmm copper multistranded conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 116 here-in-before but for one light point controlled by two, 2-way switch.

All as per item No. 116 above but one 3 Pin, 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 116 here-in-before but for 3 Pin, 5 Amps socket outlet point controlled by one switch on independent board.

All as per item No 116 here-in-before but 2.5 Sqmm PVC insulated seathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket out let 15 Amps.

S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, One way complete all as specified and directed.

S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, Two way complete all as specified and directed.

S&F Switch, Piano, flush type, polycarbonate, 15 Amps, Single Pole One way complete all as specified and directed.

S& F bell push,flush type, polycarbonate, 5 Amps, Single pole, one way complete all as specified and directed.

S & F Socket outlet, polycarbonate, 2 in 1, 3 Pin Amps, 5 Pin, multipurpose, flush type complete all as specified and directed.

S&F Socket outlet, polycarbonate, 2 in 1, 3/5 pin, 5/15 Amps multipurpose, flush type complete all as specified and directed.

S&F ding dong, bell, 230V, AC, Single Pole, complete all as specified and directed.

S&F Ceiling rose, PVC polycarbonate, isolated body, 3 terminals, AC 230 volts complete all as specified and directed.

S&F Lamp Holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED retrofit lamp, B-22 holder base with polycarbonate diffuser 9 Watt, 230 volts complete all as specified and directed.

S&F Wall bracket light fitting 12Watt(CITY2), powder coated, decorative fitting made of polycarbonate base B-22 complete with 12 Watt LED lamp complete all as specified and directed.

S&F LED Bulk head light fitting IP 55 with Engineering plastic housing & clear prismatic diffuser with lamp of 1x 9 Watt LED, with three core flexible PVC insulated copper conductor(multistranded) cable of size 23/.0193 from ceiling rose to fitting complete all as specified and directed.

S&F Ultra slim LED MS batten light fitting, 1 x 20 Watt, powder coated decorative end cap complete with retrofit poly carbonate glass tube 4' long including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 Sqmm from ceiling rose to batten complete all as specified and directed.

S&F Ultra slim LED MS batten light fitting, 1 x 10 Watt, powder coated decorative end cap complete with retrofit poly carbonate glass tube 2' long including electric connection with three core flexible PVC insulated copper conductor multistranded cable of 1.0 Sqmm from ceiling rose to batten complete all as specified and directed.

Hanging only ceiling fan of any sweep after making functional in all respect by carrying out servicing such as greasing, oiing, replacing rubber reel, split pin, check nuts, PVC connector including two coats of white enamel spray painting over a coat of red oxide primer after rubbing entire body and blades and re-writing MES number with black paint and suitable electric connection with three core flexible PVC insulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to fan complete all as specified and directed. Note:- Ceiling fans taken down vide Sl. Item No 113 hereinbefore shall be refixed.

Fixing only exhaust fan of any sweep after making functional in all respect by carrying out servicing such as greasing, oiing, replacing rubber reel, split pin, check nuts, PVC connector including two coats of white enamel spray painting over a coat of red oxide primer after rubbing entire body and blades and re-writing MES number with black paint and suitable electric connection with three core flexible PVC in sulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to fan complete all as specified and directed.Note:-Exhaust fans taken down vide Sl. Item No 113 hereinbefore shall be refixed.

Fixing only and connecting electric meter up to 25 Amps capacity & making good the disturbed surfaces.Note:- Electric meters taken down vide Sl. Item No 114 here-in-before shall be refixed.

S&F in repairs Stepped type, electronic fan regulator, flush mounting type, 180Watt, 230Volt complete all as specified and directed.

M&L for sub main wiring with 2 runS of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm alongwith one run of FRLS, PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm as earth continuity conductor drawn through & including PVC conduit of suitable dia.complete all as specified & as directed. Note : 2 runs of wire + 1 run of earth wire + 1 run of PVC conduit shall be measured as one unit

S&F Sheet metal enclosure, DBs when MCBs to be used, 4 Way, double door, Tripple Pole & Neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F Sheet metal enclosure, DBs when MCBs to be used, 8 Way, double door, Tripple Pole & Neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F MCB, Triple Pole & Neutral, 100Amps, 415V, 10kA, B curve complete all as specified and directed.

S&F MCB, SPN, 16 to 40 Amps, 230V complete all as specified and directed.

S&F MCB, SP 6 to 16 Amps, 230V complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts,UG cables etc. not exc. 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Supply and laying bricks old size, well burnt sub class 'B' bricks as in protection cover for under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed.

M & L for river washed and screened dry sand for filling in trench below and around the under ground cable for cushoining of cable including necessary punning complete all as specified and directed.Note:- For measurement purpose the punned down thickness of 18 cm only shall be considered.

M& L for Boring holes under road or cutting the road /pavement /hard standing or any other situation by mechanical or other means for inserting 25 to 40mm bore GI pipe for crossing the cable and making good both the ends complete all as specified and directed.

S&F galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

Supply, lay, joint, test and commisioning LT, XLPE insulated, screened, PVC bedded, armoured, heavy duty, electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm, 4 core complete all as specified and directed. Note:-Excavation earthwork,sand cushioning & brick protection shall be measured & paid seperately.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 3 of SSR-I, connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protection pipe and providing layer of charcoal or coke and salt in alternative layers,necessary excavation & earth work in any type of soil complete as specified including testng on completion complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 36,900.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Vasundhra Enterprises

UTTRAKHAND BUILDERS

M/S VIRAT CONSTRUCTION

SANJEEV KUMAR CONTRACTROR