REPAIRS REPLACEMENT TO JOINERY PLUMBING SANITARY ROOFING MASONRY ELECTRICAL WORK AND OTHER MISC WORKS IN CERTAIN BUNGLOWS UNDER AGE BR II AT IMA DEHRADUN

Amount

Preparation of old plastered surfaces of walls/ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls using mechanical means complete all as specified and directed.

Complete removal of existing treatment from wall / ceilling by using machinery complete all as specified and directed.

Preparation of scrapped surface of wall / ceilling and applying 1mm thick acrylic damp proof wall care putty as per manufacturer's instructions complete all as specified and directed.

Preparation of surfaces of wall / ceiling and applying two coats of oil emulsion distemper (OBD) over a coat of primer complete all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 Cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Drapery rod in any length, high strength stain less steel pipe having outer dia 25-28mm including a pair of brackets, fixed in repairs complete all as specified and directed.

M&L for Decorative finials stainless steel in matching colour of rod, fixed in repairs complete all as directed.

M&L for one or more coat of French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works complete all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

M&L for 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for Preparation of wood or wood based materials new or old of any description and girth and treated with two coat of creosote complete all as specified and directed

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed

M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed.

S&F factory made 35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed

S&F factory made 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

M&L factory made 2nd class hardwood 40mm thick Framed louvered shutters with stiles and rails 100 to 120 mm wide and panels filled with fixed louvres from 10 to 15 mm thick complete all as specified and directed

Providing and fixing factory made 30mm thick 100% soild WPC Window glazed shutter / wire mesh shutter 95 mm x 30 mm thick. Made from WPC material with density not less than 800 Kg/Cum. All four corner are fusion welded & screwed with 8 x 50 mm self - screws for additional strength. After joining all 4 corner clear space to be panelled with 5mm thick glass / S S mosquito mesh after glazing of inside of shutter 10 x12mm pvc "L"shape bead to be nailed or sticked with shutter. Provided 2 Nos SS hinges of 100mm, 1 Nos aluminium handle of 125mm, 2 Nos aluminium tower bolt of 125mm and 01 peg stay for each shutter (Glazed and Gauzed ) incl factory made 100% solid WPC ventilator frame 125 mm x 65mm double rebated frame & mullion 125 x 80mm made from WPC (Single extruded process) material comprising of virgin PVC polymer of K value 57-60 ( Suspension grade), calcium carbonate and natural fibers (wood powder/ rice/ husk/wheat husk), and nontoxic additives fabricated with metered joints after applying PVC solvent cement & screwed with fully body treated star headed screws having minimum frame desity not less than 800 Kg / cum, having good screw holding capacity (screw withdrawal strength of (min 990N ). Minimum compressive strength of 58 N/mm2. Modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water / mosquito proof & fire retardant & fixed in position with fasteners/ hold fast of required size. window shall be provided with MS Grill/Guard bar made of 10mm MS Sq bar welded to 6x12mm MS flat including painting with countersunk holes at both vertical ends. Gap between the bars should not be more than 125mm, Color as approved by GE. All as per specification as directed by Engr-in -charge. Note - (i) Glazed and Gauzed shutter both are deemed in this quoted rate (ii) Glass pane, wire mesh and grill are deemed in this quoted rate Make:- Rajshri Plastiwood,Black Cobra, Ecocell

S&F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as specified and directed.

S & F 5.0mm thick frosted glass of ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/ mild steel chowkhat in repair complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples or wooden beads in repairs complete all as specified and directed

Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed.

Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Preparation of new steel surfaces of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of primed surfaces of wall / ceiling and applying one coats of Appex paint ( weather coat exterior paint) complete all as specified and directed. (work to be carried upto a height of 7.5m).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal the demolished material outside IMA premises.

M&L for Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 for receiving wall tiles.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.

M&L for Vitrified glazed ceramic coloured tiles 8-9mm thick (Square or rectangular) polished, area of each tile not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as specified and directed. Note :- Colour & pattern as approved by Garrison Engineer.

M&L for Non skid ceramic coloured tiles 10 to 12mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.

M&L for Glazed ceramic coloured tiles of size 450x300x6-7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.

Demolition of brick work, built in cement or cement lime mortar including removal the material outside IMA premises.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removal outside IMA premises complete all as specified and directed.

M&L for 15mm thick ready mix external plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete.

M&L for Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore of pipe.

M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore of pipe.

M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Dismantling stone slab & tiles of any description or thickness, in floor, aprons etc, laid bedded & pointed in any mortar.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of marbel in front face of self including taking down existing shelf and cutting chasing and repair for inserting marble shelfs complete all as specified and directed.

S&F 15mm bore long body bib tap chromium plated with wall flange and aerator fixed in repairs complete all as specified and directed.

S&F soap dish holder of size Cat Part No CAN-1131N Make :- Jaguar, Cera (Victor series), Kajaria Kerovit, Kohler, complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 12 Cm wide with chromium plated bracket guard and railing 60 Cm long.

S&F Corner glass shelf assembly with bracket complete all as specified and as directed.

S&F in repairs of toilet paper holder of stainless steel fixed to walls with chromium plated brass screws. Make:- Jaquar, Cera, Kajaria Kerovit

S&F Vitreous china any shade cascade floor mounted single piece closet P/S trap, with cistern Shell and lid, dual flush, premium range, complete set incl PVC seat cover, jet and connected fitting. Make : Parryware/Jaquar/ HINDWARE

S&F in repairs Plastic water closet seat cover any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs CP brass hot & cold mixer cast copper alloy with centre hold for WHB and long shank fancy type 15m bore complete all as directed by Engineer-in-charge. Make :- Jaguar, Cera (Victor series), Kajaria Kerovit, Kohler

S&F in repairs CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified. Make :- Jaguar, Cera (Victor series), Kajaria Kerovit, Kohler

S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy. Make :- Jaguar, Cera (Victor series), Kajaria Kerovit, Kohler

S&F in repairs CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy. Make :- Jaguar, Cera (Victor series), Kajaria Kerovit, Kohler

S&F in repairs CP brass shower rose fancy type 150mm dia with extension Arm pipes CP Make : Jaquar/ CERA/Kajaria Kerovit

S&F in repairs CP Health faucet telephonic type with CP flexible pipe. Make : Jaguar, Kajaria Kerovit,Cera

M&L in repairs for 18mm thick one side prelaminated colour WPC Sheet for Kitchen cup board shutter and frame & fixed at site, including mica lamination on one side colour as approved by E - in - Charge complete all as specified and directed. Note :- Board edges properly finished with strip on band edges.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repairs complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repairs complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repairs complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repairs complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repairs complete all as specified and directed Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repairs complete all as specified and directed. Make :Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repairs complete all as specified and directed.. Make : Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repairs complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F Chromium plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repairs complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F in repairs brass chromium plated towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. Make:- Jaquar/ Cera/ Kajaria Kerovit

S&F in repairs brass chromium plated towel ring complete all as specified and directed. Make:- Jaquar/ Cera/ Kajaria Kerovit

S&F Pre-painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall crimped at end (min crimping 450mm), fixed with self tapping screws etc fixed in repairs complete all as directed. Make:- Tata Blue scope/ Jindal steel coloron+/ Charminar

S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc fixed in repairs complete all as directed. Make:- Tata Blue scope/ Jindal steel coloron+/ Charminar

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quqlity B).

S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed

S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repairs complete all as specified and directed.

S&F Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repairs complete all as specified and directed.

S&F in repair 8 mm thick HDF laminated wooden Flooring over and including 2 mm thick Foam sheet over a layer of polythene film sheet over finished top finished floor and including skirting to wooden flooring and replacing of defective portion with new one to match with existing wooden floor inclusive all necessary items required for replacement of existing defective wooden flooring, skirting and threshold pieces complete all as directed by Engr in Charge. Make:-

S&F Vitreous china Counter top wash basin, white, fixed in repairs complete all as directed. Make : Jaquar/ CERA/HINDWARE

S&F Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilver brackets and connecting union to pipe overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm fixed in repair complete all as specified and directed. Make:- Nirali/ Blue star/ Cera

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F in repairs PVC Solid Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement, fillets, strips and fixing at site on PVC frame as per specifications and drawing

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

S&F in repairs Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Material and labour for Modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 Sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting not less than 25 mm dia and fixing accessories and 1.5 Sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked as per colour of wall , for the following. Make of wire: SCI, Havells, Polycab, Anchor Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on Same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one, bell switch 5 Amps

All as per item No.104 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix modular switch 1 way10A, 1 Module as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make:

Supply and fix modular switch 1 way 20A, 1 Module with indicator lamp as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make:

Supply and fix modular bell push with indicator 6A, 1 Module as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make :-

Supply and fix modular socket 10A, 2/3 pin combined 1 Module as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make :-

Supply and fix modular socket 6A/16A, 2/3 pin combined 1 Module as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make :-

Supply and fix modular fan regulators step type 2 module 120W as per the existing colour of wall all as specified and directed by Engr-In -Charge. Make :-

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and Fix in rapiar LED Up Down twin glow 20W + 20W light fitting of lumens 2000 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,system efficacy 100L/W , IP-20 ,high bright LED lamp, colour temp not less than down 6500/ up 3000 Cool Day Light/warm light ,colour rending index not less than 80 ,life not less than 35000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 160-360V AC, 50 Hz, surge protection minimum 2.5 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /CROMPTON/BAJAJ

Supply and Fix in repairs LED batten light fitting 2 feet of 1000 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,system efficacy 100L/W,polycarbonated diffuser, IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV including connected the same with using PVC sheathed, insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv Tube light fitting complete all as specified and directed . Make: - PHILIPS /CROMPTON/BAJAJ

Supply and Fix in repairs LED street/Security wall mounted light fitting of lumens 2550 lm ,Single Piece High pressure die cast aluminium,system efficacy 1100L/W,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, fully diffused ,Polycarbonated Cover for More protection ,inbuilt electronic driver IP 66 ,High bright LED with Lens, colour temp Not less than 5700 Cool Day Light,colour rending index not less than 70 ,life not less than 50000 hrs,inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz ,surge protection minimum 4 KV, including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /CROMPTON/BAJAJ

Supply and fix Metal finish wall light with maximum bulb wattage 20 watt, base of the lamp should be E27, colour of the fixture is white & silver wsith chrome finish and having rectanguar shape for aesthetic look. dimension of the fixture should be 125 x 150 x 240 mm and connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall complete all as specified and directed. Make: - PHILIPS /CROMPTON/BAJAJ

S& F in repair metal finished bed side lamp grey in colour 2 Watt /50 Lumens/3000K, base of the lamp should be E27 and dimension of fitting 470x67x28 mmand connected the same with using PVC sheathed and insulated 3 core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting to wall including taking down existing fitting complete all as specified and directed. Make: - PHILIPS /CROMPTON/BAJAJ

S & F in repairs sub main wiring with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make: - Havells,Polycab, Anchor,SCI

2 x 10Sqmm + 1 x 10sqmm (From Main DB to Sub DB of Qtr )

2 x 4 + 1x4 Sqmm ( For AC Sub main & Geyser )

Supply and fix in repairs exhaust Fan ,made of sturdy Engineering plastic complete with louvers shutter,voltage 230volts ,50HZ,RPM 1200,copper winding of sweep 250 including cutting holes on wall and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. Make-

Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm thick GI wire by means of nuts,bolts,check nuts & washers of galvanized iron or steel,protected by 15mm bore light grade galvanised iron pipe and connected to main switch board,including all necessary excavation & earth work in hard dense soill including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover10mm thick hinged to CI frame and 6mm MS rod for handle and necessary testing complete all as shown in electrical plate No 3 of SSR part-I all as specified and directed.(one earthing for each main Panel )

S and Fin repairs sheet metal enclosure double door type ISI marked MCBs DB SPN(Single pole and neutral) 240V AC 12 way with 200 Amps rated bus bar all as specified and directed

S and F in repairs single pole and neutral enclosure with a two pin and earth, plug and socket complete with one single pole MCB 20 Amps all as specified and directed

S and F in repairs 240 Volts ,10KA” B” curve miniature circuit breaker (MCB SP) of single pole and current carrying capacity 6 to 32 A in the MCB DB complete with connection testing and commissioning all as specified and directed

S and F in repairs 240 Volts ,10KA” B” curve miniature circuit breaker (MCB SPN ) of single pole and neutral current carrying capacity 40 A in the MCB DB complete with connection testing and commissioning all as specified and directed

S & F in repairs Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) 8Way,415 Volts fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection, suitable for fixing FP MCCB 100/125 Amps as incomer complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measured separately under relevant items of this schedule

S & F in repairs MCCB 100 Amps 4 Pole ,415 Volts ,16 KA with thermal magnetic release and adjustable overload setting complete all as specified and directed.

Supply and fix in repair concealed in wall Rigid non metalic PVC conduit of 25mm dia , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks complete all as specified and directed. ( For for drawing Point wiring cable /Submain cable where conduit is open on wall / conduit got damged in conceale / Blocked /For tele/LAN wire) Note : The rate for cutting and chasing of wall to flush the conduit and making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface shall deemed to be included in the quoted rate .

S&F in repairs double USB charger socket 3000mA ,2 module with outer cover and frame including metal modular flush box complete all as specified and directed .Make : Legrand /Havells/ Indo Asian

Aggrawal Builders and Furnishers

M/S S P BUILDERS