Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹11.9 LAccepted-Finance | l1 | Accepted-Finance L1 | |
| 2 | l2₹12.9 L+₹1.0 L (8.71%)Rejected-Finance KOTTAVILA PUTHUVAL PUTHENVEEDU PARASALA P O PAVATHIYANVILA | THIRUVANANTHAPURAM | KERALA | 695001 | l2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical L6 | |
| 4 | Rejected-Technical | - | Rejected-Technical L5 | |
| 5 | Rejected-Technical | - | Rejected-Technical L4 |
| Sl No | Description | Qty | Unit | Sukumaran B L4 | SUNIL DAS S S L3 | SHINE MM L1 | PRADEEP SR L5 | SAJU K L2 | ISRAYEL Y L L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00School Maintenance | |||||||||
| 1.00 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | 580 | sqm | 28.86 ₹16,738.8 | 27.67 ₹16,048.6 | 25 ₹14,500 Lowest | 35.83 ₹20,781.4 | 27.56 ₹15,984.8 | 31.48 ₹18,258.4 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 750 | kg | 152.96 ₹1,14,720 | 146.65 ₹1,09,987.5 | 135 ₹1,01,250 | 125 ₹93,750 Lowest | 146.13 ₹1,09,597.5 | 166.89 ₹1,25,167.5 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 850 | sqm | 688.69 ₹5,85,386.5 | 660.28 ₹5,61,238 | 600 ₹5,10,000 Lowest | 800 ₹6,80,000 | 657.95 ₹5,59,257.5 | 751.44 ₹6,38,724 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 130 | metre | 462.08 ₹60,070.4 | 443.02 ₹57,592.6 | 400 ₹52,000 Lowest | 573.73 ₹74,584.9 | 441.45 ₹57,388.5 | 504.18 ₹65,543.4 |
| 1.00 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 15.6 | kg | 691.79 ₹10,791.92 | 663.26 ₹10,346.86 | 625 ₹9,750 Lowest | 858.94 ₹13,399.46 | 660.92 ₹10,310.35 | 754.83 ₹11,775.35 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 6 | sqm | 1,045.78 ₹6,274.68 | 1,002.65 ₹6,015.9 | 1,000 ₹6,000 | 1,298.47 ₹7,790.82 | 999.11 ₹5,994.66 Lowest | 1,141.08 ₹6,846.48 |
| 1.01 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | 150 | sqm | 641 ₹96,150 | 614.56 ₹92,184 | 600 ₹90,000 Lowest | 600 ₹90,000 Lowest | 612.39 ₹91,858.5 | 699.41 ₹1,04,911.5 |
| 1.01 | 50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge | 5 | each | 271.93 ₹1,359.65 | 260.71 ₹1,303.55 | 250 ₹1,250 | 230.2 ₹1,151 Lowest | 259.79 ₹1,298.95 | 296.7 ₹1,483.5 |
| 1.01 | 50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. | 10 | each | 383.66 ₹3,836.6 | 367.83 ₹3,678.3 | 400 ₹4,000 | 324.78 ₹3,247.8 Lowest | 366.53 ₹3,665.3 | 418.61 ₹4,186.1 |
Tender Value
₹16.9 L
EMD Value
₹42,357
Closing Date
10 Aug 2026, 6:00 pmClosed
Executive Engineer
Executive Engineer
TVPM Corporation 2026 27 Proj 39 Sasthamangalam ward Rennovation of sasthamangalam LPS
2026_LSGD_863645_2
EE(C)/PLANFUND TENDER/2026-27 (5)
Open Tender
Civil Works - Buildings
Item Rate
180 days
Thiruvananthapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,760
Yes
₹42,357
Yes
13 Oct 2026
1 Aug 2026
11 Aug 2026
1 Aug 2026
10 Aug 2026
1 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1School Maintenance | |||||
| 1.001 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil | - | sqm | - | - |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.003 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.004 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.005 | 21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | 1 | kg | - | - |
| 1.006 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
| 1.007 | 50.12.5.1:Providing and fixing false ceiling with e board classic tile or equivalent make of size 610x610x4 mm ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately) | - | sqm | - | - |
| 1.008 | 50.14.1.2:Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge | - | each | - | - |
| 1.009 | 50.14.1.1:Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charge. | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_1460930.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
preagmnt.pdf
Tender Documents • 0.29 MB
epay.pdf
Tender Documents • 0.23 MB
integrity.pdf
Tender Documents • 0.23 MB
nit.pdf
Tender Documents • 0.36 MB
affidavit.pdf
Tender Documents • 0.27 MB
viewsbd.pdf
Tender Documents • 1.84 MB
BOQ_1460930.xls
BOQ • 0.24 MB
fot.pdf
Tender Documents • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .