PROV LAY AND COMP WITH SENSOR PAVER OF READYMADE BITU MIX DBM 75 MM THICK COMP INCL PRIME COAT AND TACK COAT BC 40 MM THICK COMP INCL TACK COAT AND ROAD MARKING WITH THERMOPLASTIC PAINT FOR SURF WKS BET KM 0.85 TO KM 9.81 ON RBDK ROAD IN 53 RCC SEC

Amount

BETWEEN KM 0.850 TO KM 9.810 ON RED BRIDGE-DEHRIAN-KHATI ROAD

Providing and applying of Prime Coat with Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer @ 7.5 kg per 10 Sqm (using with BPD with manual labour) Between Km 0.850 TO KM 9.810 ON RED BRIDGE-DEHRIAN-KHATI ROAD, all as specified in MoRT&H Specification for Road and Bridge Works (5th Revision) and rolled to the required specification all as directed by Engineer-in-Charge/OC Contract.

Providing and laying 75 mm thick (compacted) Dense Bituminous Macadam layer with bitumen after duly preparing surface including scrubbing, cleaning and applying tack coat with bitumen emulsion / VG-10 bitumen and bitumen pre-coated stone aggregate as per Table 500-8, 500-9 & 500-10 of MoRT&H Specifications for Road & Bridge Works (5th Revision) mixed with 4.5% binder asphalt VG-10 grade and rolled to the required specifications between Km 0.850 TO KM 9.810 ON RED BRIDGE-DEHRIAN-KHATI ROAD,, all as specified and as directed by Engineer-in-Charge/OC Contract.

Providing and laying 40 mm thick Bituminous Concrete (compacted) with HMP Mix after duly preparing BT surface including scrubbing, cleaning and applying tack coat with bitumen emulsion and bitumen pre-coated stone chips grading confirming to Table 500-17 and physical requirement as per Table 500-16 and mix satisfying the requirement of Table No 500-19 and Table No: 500-12 of MoRT&H Specifications for Road and Bridge Works (5th Revision) mixed with binder asphalt VG-10 grade and binder content minimum 5.4% by weight of total mix and 2% filler by weight of aggregate (filler) conforming to the required specification for filler as per Table 500.9 of MoRT&H specifications for Road and Bridge Works (5th Revision) and rolled to the required specifications Between Km 0.850 TO KM 9.810 ON RED BRIDGE-DEHRIAN-KHATI ROAD, all as specified and as directed by Engineer-in-Charge/OC Contract

Providing Road Marking with Hot applied Thermoplastic compound as per IRC 35:2015 and also conforming MoRTH specification for road and Bridge work (05th revision) and physical requirement including preparation of surface between 0.850 TO KM 9.810 ON RED BRIDGE-DEHRIAN-KHATI ROAD all as specified in particular specification and as directed by Engineer-in-Charge/OC Contract.

Adnan Constructions Private Limited

M/s Sharp Constructiopn Company

MIRZ INFRASTRUCTURE BUILDERS

JK CONSTRUCTION CO

M/S SHIVAM BUILD CON ASSOCIATES