REPAIR/MAINT OF DG SETS, VOLTAGE STABILIZERS AND ALLIED INFRA AND REPAIR/REPLACEMENT OF STREET LIGHT AND ALLIED WORKS AT VARIOUS LOCS UNDER GE 969 EWS

Amount

Servicing of Diesel engine Generating sets 15 KVA to 25 KVA Rating to be carried out as per schedule given as under. B- check:- (Every 100 Hrs or 6 months whichever is earlier) (i) Change lubricating oil (ii) Change lubricating oil filters (iii) change fuel filters (iv) Change coolant (v) check Engine wiring for damage (vi) Drain fuel supply tank (vii)Change by pass lubricant filters (viii) Change air filters (ix) Check oil pressure (x) Change fuel water seperator. C-check :- (Every 1500 Hrs or 1 year whichever is earlier) (i) Adjust valves (ii) Steam clean engine (iii) Replace hoses if required (iv) Check turbo charger mounting nuts (v) C Check Engine oil heater (vi) clean rediator (vii) Inspect following parts and replace if required (Alternator,starter etc) (viii) Clean fuel from inside (ix) Change engine oil. Note : (i) B-check and C check spare parts will be measured and paid separately under supply only items (fixing charges included with the servicing of DG set).

Servicing of Diesel engine Generating sets 30 KVA to 63 KVA Rating to be carried out as per schedule given as under. B- check:- (Every 100 Hrs or 6 months whichever is earlier) (i) Change lubricating oil (ii) Change lubricating oil filters (iii) change fuel filters (iv) Change coolant (v) check Engine wiring for damage (vi) Drain fuel supply tank (vii)Change by pass lubricant filters (viii) Change air filters (ix) Check oil pressure (x) Change fuel water seperator. C-check :- (Every 1500 Hrs or 1 year whichever is earlier) (i) Adjust valves (ii) Steam clean engine (iii) Replace hoses if required (iv) Check turbo charger mounting nuts (v) C Check Engine oil heater (vi) clean rediator (vii) Inspect following parts and replace if required (Alternator,starter etc) (viii) Clean fuel from inside (ix) Change engine oil. Note : (i) B-check and C check spare parts will be measured and paid separately under supply only items (fixing charges included with the servicing of DG set).

Servicing of Diesel engine Generating sets 82.5 KVA to 160 KVA Rating to be carried out as per schedule given as under. B- check:- (Every 100 Hrs or 6 months whichever is earlier) (i) Change lubricating oil (ii) Change lubricating oil filters (iii) change fuel filters (iv) Change coolant (v) check Engine wiring for damage (vi) Drain fuel supply tank (vii)Change by pass lubricant filters (viii) Change air filters (ix) Check oil pressure (x) Change fuel water seperator. C-check :- (Every 1500 Hrs or 1 year whichever is earlier) (i) Adjust valves (ii) Steam clean engine (iii) Replace hoses if required (iv) Check turbo charger mounting nuts (v) C Check Engine oil heater (vi) clean rediator (vii) Inspect following parts and replace if required (Alternator,starter etc) (viii) Clean fuel from inside (ix) Change engine oil. Note : (i) B-check and C check spare parts will be measured and paid separately under supply only items (fixing charges included with the servicing of DG set).

S&F new air filters cartridge elements with 'O' ring for 15 to 25 KVA DG set complete all as specified and as directed.

S&F new air filters cartridge elements with 'O' ring for 30 to 63 KVA DG set complete all as specified and as directed.

S&F new air filters cartridge elements with 'O' ring for 63 to 160 KVA DG set complete all as specified and as directed.

Supply only fuel oil filter cartridge elements with 'O' ring for 15 to 25 KVA DG set complete all as specified and as directed.

Supply only fuel oil filter cartridge elements with 'O' ring for 30 to 63 KVA DG set complete all as specified and as directed.

Supply only fuel oil filter cartridge elements with 'O' ring for 63 to 160 KVA DG set complete all as specified and as directed.

Supply only lubricant oil filter cartridge elements with 'O' ring for 15 to 25 KVA DG set complete all as specified and as directed.

Supply only lubricant oil filter cartridge elements with 'O' ring for 30 to 63 KVA DG set complete all as specified and as directed.

Supply only lubricant oil filter cartridge elements with 'O' ring for 63 to 160 KVA DG set complete all as specified and as directed.

Supply only fuel water separator filters cartridge elements with 'O' ring for 63 to 160 KVA DG set complete all as specified and as directed.

M&L for engine oil 20 W 40 grade in DG set complete all as specified and as directed.

M&L for coolent of DG Set Complete all as specified and as directed. Make Castrol/servo

M&L distilled water for battery complete all as specified and as directed.

S&F V-Belt off sizes complete all as per site requirement all as specified and as directed.

S&F Oil pressure gauge ISI marked complete all as specified and as directed.

S&F Oil temperature gauge ISI marked complete all as specified and as directed.

S&F Fuel gaugemeter ISI marked operated on 24 V DC complete all as specified and as directed.

S&F RPM Meter complete all as specified and directed by Engr-in-charge

S&F AVR of DG Set of Capacity (10KVA to 50 KVA) as per site requirement complete all as specified and as directed by Engr-in-charge.

S&F AVR of DG Set of Capacity (62.5 KVA to 160 KVA) as per site requirement complete all as specified and as directed by Engr-in-charge.

M&L for Dismantling of radiator complete from DG Sets cleaning/scraping of depositing manually from outside of the radiator, cleaning of all cooper tubes of radiator with descaling solution from inside & outside with forged feed method & with water and air compressor (by using separate chemical pump water pump & compressor) plugging of all leakages in welding, brazing of copper tubes, cleaning of fins and replacement of gaskets etc for the following capacities of DG Sets :-

DG Sets upto 50 KVA

DG Sets 62.5 KVA to 160 KVA

M&L for dismantling of Exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust and refixing including replacement of worn out rubber gasket packing and nut, bolts complete all as specified and as directed.

M&L for repair and maintenance of alternator of type, with opening the cover cleaning all the parts, removing dust with tightening all the electrical connection, checking the serviceability of automatic voltage regulator and voltage setting, tightening the loose connections, checking and setting the alighment properly cleaning air inlet, opening the terminals box top and front cover and tightening the cable leads, checking insulation resistance closing the covers and testing complete all as specified and as directed for the following capacity of DG Set :-

Upto 63 KVA DG set of any make

63 KVA to 166 KVA DG set of any make

M&L for disconnecting the defective/burnt Alternator from the engine and removing it from the base frame and shifting it to the workshop, removing rotor and cutting the field copper winding or armature winding and cleaning the slots complete for rewinding and using super enameled copper wire, varnishing and drying using three coats of insulating varnishing reassembling the motor after repairs/re-setting complete re-installation at site including transportation from the site to and pro, complete of capacity upto following.

DG Sets upto 40 KVA of any make

DG Sets 50 KVA to 63 KVA of any make

DG Sets 82.5 KVA of any make

DG Sets 100 KVA to 160 KVA of any make

M&L for repair and maintenance of metal doors (i.e., front and back door) of DG set of capacity from 18.75 KVA upto 166 KVA, incl taking down door to the work shop from site and fixed suitable hinged incl welding work if required and painting the same as existing colour and refixing the same on DG set complete and as directed by Engr-in-charge.

Replacement of old unserviceable self starter with new self starter, 12 Volts, DC as per existing model and make of Diesel Generator set of capacity upto 160 KVA, complete all as specified and as directed.

Taking down U/S battery 12V from the DG Set and supply and install 12 V 180 AH maintenance free battery including terminal clamps, copper lead 2 Mtr length ,battery stand complete testing and commissioning complete all as specified and as directed.

M&L for replacement of battery lead suitable for 180 AH capacity 1.5 mtr long including GM terminals one end coper lug and other and including 0.5 mtr connecting both end with gun metal terminals complete all as specified and as directed.

Taking out diesel Tank of any capacity carefully including disconnection from system, descaling the diesel tank with water pressure and removing the complete deposited, drying the tank and painting two coat with super enamelled paint outside the tank size, replacement of gate valve and fixing the tank in original location and connection with existing diesel line with replacement GI/MS fitting replacement of diesel indicator glass/PVC tube with neccessary fitting, repair to any leakage, cleaning and testing of fuel line upto FIP inlet including making of locking arrangements complete of DG Set Capacity upto 160 KVA.

M&L for Tank calibration including provn of tank level indicator of fibre tube with indication of full tank capacity of showing minimum reading of 0.5 ltrs for DG set upto 200 KVA capacity, complete all as specified and as directed.

Taking out unserviceable asbestos rope from the exhaust pipe, cleaning the exhaust pipe and supply and wraping new asbestos rope of suitable size and wrapping with wire mesh and plastering with plaster of paris / white cement for smooth finishing including replacment of gasket and tightening of all nut and bolts, complete all as specified and as directed.

Overhauling of DG Set engine upto four cylinder of capacity upto 40 KVA by dismantling/strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector including replacement of worn out spare i.e, cylinder liner with 'O' ring, Piston assembly, connectin rod, large end bearing pair, valve seat, valve guide, FIP element, lubricant oil pump, gasket for cylinder, set of O rings, Set of hose pipes,fuel pipes nozzle calibration, FIP caliberation, water pump assembly etc and reassembling the complete engine all as specified and as directed.

Overhauling of DG Set engine upto six cylinder of capacity upto 63 KVA by dismantling/strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector including replacement of worn out spare i.e, cylinder liner with 'O' ring, Piston assembly, connectin rod, large end bearing pair, valve seat, valve guide, FIP element, lubricant oil pump, gasket for cylinder, set of O rings, Set of hose pipes,fuel pipes nozzle calibration, FIP caliberation, water pump assembly etc and reassembling the complete engine all as specified and as directed.

Overhauling of DG Set engine upto four cylinder of capacity upto 82.5 KVA to 160 KVA by dismantling/strip opening of the DG Set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector including replacement of worn out spare i.e, cylinder liner with 'O' ring, Piston assembly, connectin rod, large end bearing pair, valve seat, valve guide, FIP element, lubricant oil pump, gasket for cylinder, set of O rings, Set of hose pipes,fuel pipes nozzle calibration, FIP caliberation, water pump assembly etc and reassembling the complete engine all as specified and as directed.

S&F on load changeover switch Range 400A, 415V, 4P, confirming to IEC 60947-3, Conforms to Staggered terminals, Site convertible fuse version for open execution Flip-able handle above 400A Interchangeable dual shaft position with site convertibility along with SS enclosure version require separate cable gland box complete all as specified and directed by Engr-in-Charge.

All as per item No 38 herein before but of capacity 200 Amp

All as per item No 38 herein before but of capacity 100 Amp

All as per item No 38 herein before but of capacity 63 Amp

Repair and overhalling of FIP Nozzle of capacity 15 KVA to 63 KVA.

Repair and overhalling of FIP Nozzle of capacity 63 KVA to 166 KVA.

S&F of Dynamo with 12 Volts DC of make Lues, Diesel Generator set of any capacity complete all as specified and directed.

S&F control cards for output supply of voltage stabilizer of capacity upto 200 KVA complete all as specified and as directed.

S&F control cards for input supply of voltage stabilizer of capacity upto 200 KVA complete all as specified and as directed.

S&F control card for high voltage cut off protection reduction of voltage and automatic ON after 10 second time delay complete all as specified and as directed.

S&F servo motor complete including pinion for voltage correction having speed or correction 8 volts per second of capacity upto 10 Kg Torque suitable for 15 KVA to 200 KVA stabilizer. Complete all as specified and as directed.

S&F indicator lamps to show RYB phase of 3 phase 415 volt 50 Hz AC supply as replacement of defective indicator lamp in existing panel all as directed.

M&L for complete rewiring for power and control circuit of voltage stabilizer using standard copper wire, replacement of thimbles, connectors numbering of wiring to all control and measuring instrument for capacity upto 200 KVA voltage stabilizer.

S&F dimmer for servo stabilizer of capacity upto 200 KVA, complete all as specified and as directed.

M&L for filling/toping up of oil in servo voltage stabilizer having dielectric strength upto 35 KVA at 2.5mm gap high voltage as per IS/IEC specification ofl low viscosity complete all as specified and as directed.

S&F in replacement of burnt defective LT copper coil of stabilizer with new one made out of suitable size/guage of copper super enameled wire of high quality matching with the existing impendence and insulation including testing complete all as specified and as directed.

Earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick buried directly in ground vertically ( earth pit of depth not less than 2.25m below ground level ) with top edge of the earth plate not less than 1.5m below normal ground level, connecting with 4.00 mm galvanized steel wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron and earth wire protected by galvanized steel pipe 15mm dia (light grade) including provn of concrete pit in PCC (1:2:4) type B-1 (using 20 mm graded mechanically crushed stone aggregate), 40mm thick RCC cover slab (1:2:4) type B1 reinforced with XPM ( weight not less than 4kg/sgm ) and frame made of angle iron of section 40x40x6mm with lugs, 02 Nos handle of 6 mm dia mild steel bar made to shape, 20mm dia Gl pipe (light grade) for watering perforated at bottom 1.75m long placed on top edge of earth plate, charcoal and salt filling in alternate layer, test point made out of phopsphorus/ Bronze with fixing arrangement, funnel wire mesh and earth work in soft/loose soil, returning filing, removal of surplus soil all as shown in electrical plate No.3 of SSR Part-l and connection to earth test point complete, all as specified including testing on Completion. Note : Item of earthing include cost of 7.5m long Gl earth wire 4mm dia, ,earth work in soft loose soil, returning filing and removal, Gl protection pipe, Gl watering pipe, funnel, wire wesh, RCC Cover, etc

S&F in replacement of MCCB, 415 Volt, 16 KA, 4 Pole, 63 Amps capacity ISI marked complete including taking down old unserviceable MCCBs complete all as specified and as directed.

S&F in replacement of MCCB, 415 Volt, 25 KA, 4 Pole, 100 Amps capacity ISI marked complete including taking down old unserviceable MCCBs complete all as specified and as directed.

S&F in replacement of MCCB, 415 Volt, 35 KA, 4 Pole, 125 Amps capacity ISI marked complete including taking down old unserviceable MCCBS complete all as specified and as directed.

S&F in replacement of MCCB, 415 Volt, 36 KA, 4 Pole, 160 Amps capacity ISI marked complete including taking down old unserviceable MCCBs complete all as specified and as directed.

S&F in replacement of MCCB, 415 Volt, 36 KA, 4 Pole, 200 Amps capacity lSI marked complete including taking down old unserviceable MCCBs complete all as specified and as directed.

S&F in replacement EMS upgrade suitable for 30 KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement Feed Pump suitable for 30KVA to 160 KVA DG set including testíng complete all as specified and as directed.

S&F in replacement LLOP sensor suitable for 30KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement stop Soenoid suitable for 30KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement DC Alternator suitable for 30KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement Fuel Pipe long suitable for 30KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement Tapper Cover Jain suitable for 30KVA to 160 KVA DG set including testing complete all as specified and as directed.

S&F in replacement Return Pipe complete all as specified and as directed.

S&F radiator Fan of any type and size upto 160 KVA DG Set complete all as specified and as directed.

Dismantling and taking down existing unserviceable/ damage HPSV/MH/LED Security light/Flood fitting of any sizes and capacity,complete all as specified and as directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

All as per above serial No. 71 but 60 watt capacity complete all as specified and as directed.

All as per above serial No. 71 but 70 watt capacity complete all as specified and as directed.

S&F in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

S&F in replacement Garden Light LED type 20 Watt 230 Watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and lay cable PVC insulated unsheathed of size 1.5 sqmm 3 core copper conductor for service connections from junction box to light fittingcomplete all as specified and as directed.

S&F GI Bracket bend to shape 1.2mtr long of size 40/32/25mm GI Pipe suitable for LED Street Light Fitting of size 35/60/70W including necessary fittings such as screw, clamps, hold fast etc complete all as specified and as directed.

Note:- Schedule of credit Rs 60,350.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/s FAYAZ AHAMD WANI AND SONS

M/S HAMIDULLAH KHUROO

M/s SONA ULLAH LONE AND SONS

M/s Habib Electronics