PROVN OF 01 X GUARD ROOM FOR 06 X ORs PLUS 02 X NCOs WITH RCC FRAMED WATCH TOWER WITH 6 MTR STAGING FOR SECURITY AREA AT ARMY AREA BANAR UNDER GE BANAR

Amount

M&L for Surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed.

Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge. Note :- Removal of excavated material upto 50m shall deemed to be included in quoted rate.

Earth work in excavation in ordinary rock by mechanical means (Hydraulic excavator) means over areas (depth exceeding 1.5m and upto 3.00 m , 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. Note :- Removal of excavated material upto 50m shall deemed to be included in quoted rate.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for Cement concrete type D2 (1:4:8) 40mm gradded aggregate in foundations, filling and mass-concrete

M&L for design mix M-25 (use 20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L design mix M-25 for (use 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

M&L design mix M-25 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge.

M&L for design mix M-25 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for design mix M-25 for stairs supported on walls, beams and columns in floors, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas complete all as specified and directed by Engr-in-Charge.

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in fins facias complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of concrete chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of concrete fins, facias complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of concrete staircases with sloping or stepped soffits including risers and stringers (excluding landing) complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of concrete of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork for rough finished surfaces of concrete of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engr-in-Charge.

M&L for formwork for rough finished surfaces of concrete of sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed by Engr-in-Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 21.00 but 6mm to 10mm dia as in stirrups

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick bedding layer in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone agregate over 75 mm thick sub base PCC 1:4:8 type D-2 over rammed earth complete all as specified and directed by Engr-in-Charge.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick in CM 1:3 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15 mm thick bedding layer in CM 1:6 over 25mm thick PCC 1:2:4 type B-0 using 12.5 mm gradded crushed stone aggregate over 75 mm thick sub base PCC 1:4:8 type D-2 over rammed earth complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm thick , set and jointed 1:3 in neat cement slurry and pointed in white or coloured cement to match fix in 10 mm thick rendering in CM 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of priming complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for fly ash brick masonry (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6.

M&L for flyash brick masonry (using old size bricks) straight or curved on plan to any radius in half brick thick walls, built in CM 1:6.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces to be finished even and smooth in CM 1:6 (without using extra lime or cement)

M&L 10mm thick rendering in over concrete surfaces of ceiling in CM 1:3 to be finished even and smooth (without using extra lime or cement)

M&L Rendering 15mm thick on stone masonry or other than fair faces of brick work or concrete surfaces to be finished even and smooth in CM 1:4 (without using extra lime or cement)

S&F facrory made box type steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars dovetailed or welded all as specified.

S&F factory made box type steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars dovetailed or welded all as specified.

S&F factory made box type steel ventilator with top hung shutters including hinges and steel peg stay, complete.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4mm thick plain glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified.

M&L Preparing new steel or iron surfaces of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified.

Supply and fixing aluminium handles, cast type, anodised 150 mm long complete all as specified.

S&F aluminium anodised, barrel tower bolts of extruded section, 200mm long.

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified .

S&F floor door stoper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (140mm length of cover plate).

M&L for mild steel work in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali primer Complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash Complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash Complete all as specified and directed.

M&L for preparation of new unplastered surface of concrete and applying two coat of cement base paint over one coat of primer complete all as specified and directed

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F wash basins, vitreous China (flat back or angle back type) any size 550x 400mm including cutting for and pinning in ends of brackets or erecting stand but including brackets including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 10 ltr capacity

M&L for viterous china Urinal, bowl type flat back, size 465x365x265mm white (minimum) with grating and union for discharge pipe including connections to flushing pipe and outgoing pipes fixed complete all as specified.

M&L for viterous china Urinal partitions white slabs of size terminating about 40cm above floor line complete all as specified and directed by Engr-in-Charge.

M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for water proofing treatment of roof surfaces with 3 mm thick modified APP membrane weighing 3kg/sqm reinforced with polyster non wove fabric with one coat of bitumen primer @ 0.40 ltr/ sqm and one coat of bonding material using blown type bitymen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm over 10 mm thick plaster even and smooth (without using extra cement ) in cm 1:4 with wpc compound and finish top with 40 mm thick PCC padding (1:2:4) type B-0 (12.50 mm graded aggregate) complete all as specified and directed by Engineer-in-charge. Note :- WPC shall be measured separately as supply only.

Supply only integral WPC compound, ISI marked.

M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface using broken stone or boulders all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection complete all as specified.

S&F stop valve, cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F stop valve with long shank and cup (Concealed) cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed.

S&F fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F fancy type, chromium plated, pillar tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.

S&F 15 mm dia gun metal gate valves with iron wheel head, srewed both ends for iron pipe and fixed complete all as specified & directed.

M&L for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

M&L 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

M&L 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

M&L 75 mm dia PVC (SWR) vent cowl

M&L 75 mm bore PVC (SWR) Bends any radius,

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L 75mm dia PVC (SWR) junction single, (Single T) equal or unequal

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including clamps complete all as specified and directed by Engr-in-Charge.

M&L 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including clamps complete all as specified and directed by Engr-in-Charge.

M&L 1000 ltr Rotational moulded polyethylene water storage tanks including fixing of 20mm bore float valve (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F brass chromium plated tubular towel rail, 20mm dia, D type 60 cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.

M&L for PVC waste pipe 32mm dia complete all as specified and directed by Engr-in-Charge.

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed by Engr-in-Charge.

S&F Soap dish, viterous china, white of approx size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as spd and directed.

M&L 60 mm thick rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size (shape as approved bt GE) laid in path,porch,hard standing or flooring etc conforming to IS-15658-2006, M-35 grade with grey cement and pigment complete all as spd and directed.

M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Note :- Removal of excavated soil upto a distance 50m shall deemed to be included in quoted rate.

M&L PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate in concrete bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipe.

M&L reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete with collars all as specified and directed.

M&L Cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc

Add to Srl item No. 94.00 here-in-above for each 25mm girth or part thereof over 30cm.

M&L Precast reinforcement cement concrete type B1 1:2:4 (using 20 mm graded crushushed stone aggr) for manhole cover including placing in position and set in CM( 1:4).

M&L Mild steel work as in steps, handle conforming to Fe-410-0 or Fe-310-0 in flat iron and similar small articles.

M&L Rendering 10 mm thick on block masonary walls In cm (1:4) mixed with WPC as per manufactures instructions. (Note : WPC shall be measured and paid sepately)

Supply and fixing of PVC moulded high strength septic tank of capacity 1000ltr to carry sewage and sullage water, including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 Users.

M&L for construction of Soakage wells, excavation in any type of soil, foundation in PCC in 1:3:6 type C-2, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM (1:4), RCC cover slab in M 25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M internal dia X 3.0M effective depth. Complete all as per drg No CEBZ/TD/76/2011 Sheet No 1/1 dt 01 Aug 2011.

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge. Note :- Removal of excavated soil upto a distance 50m shall deemed to be included in quoted rate.

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L PCC coping type C-1 (1:3:6) using 12.5mm graded stone aggregate as in coping including necessary formwork, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Extra over to stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, regular courses

M&L for flush ponting in cement mortar 1:3 to squared rubble walling jodhpur type regular course

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall/Surface on wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc complete all as specified and directed for One light /bell / buzzer point controlled by one, one way switch 06 Amps.

All as per srl item No 106.00 here-in-before but one fan point controlled by one, one way switch 06 Amps.

All as per srl item No 106.00 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per srl item No 106.00 here-in-before but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.

All as per Serial Item No 106.00 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified & directed

Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 16 Amps, single pole, one way, 250 volts complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 250 volts complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, double door with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall complete all as specified directed.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing MCB, SPN of 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fixing Earthing complete with GI earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth note less than 2.25 metres below ground level with top edge of earth plae at a depth note less than 1.5 metres below level ground, connected to GI iron or steel earth wire 4 mm dia (8 SWG) by means of nuts , bolts checks nuts,washers and earth wire protected by GI iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre cast RCC coverslab 30cmX30cmX10cm with one lifting handle made of 8mm dia ms bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavatin and earth work in any type of soil complete all as shown electrical plate No 3 of MES schedule part-I and testing after completion.

Supply and fix Turbo heavy duty Metal body exhaust fan 300 mm sweep (1400RPM), 4 blade including louvers grounting with nut bolts complete all as directed.

M & L for cutting/making of hole suitable size for 300mm exhaust fan in the stone masonary/brick wall and making good the surfaces by plastring of cement mortar and finish surface with existing wall.

S & F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit cable shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC conduit and accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 2.5 Sqmm conductor cable and one run of PVC conduit shall be measured as one unit length.)

Supply and fixing LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts with lifetime of 50000 buring hours with 70% of its initial lumen maintained. CRI>80, Power Factor>0.95, THD<10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class-1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directred by Engr-in-Charge.

Supply and fixing LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 50000 buring hours with 70% of its initial lumen maintained. CRI>80, Power Factor>0.95, THD<10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class-1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directred by Engr-in-Charge.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 35 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified and directed.

M&L for clean, dry sand in trenches/ducts for cushioning to cable complete all as specified.

M&L pre-cast concreat cable cover of class LV type-2 flat size 300mmX180mm X40mm complete laid in trench.

Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core.

Supply and lay galvanised light grade including fitting 40 mm dia with all fittings laid in trenches/floor all as directed.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Cutting of bituminous/PCC/PQC road for laying of pipe line not exceeding 1.5 m depth/width including making good to disturbed portion to match with the existing road / path with PCC.

Drilling of water pipe line of any type and size and type for connection of 25/20 mm GI pipe with clamp and other assesries complete all as specified & directed.

Supply and laying GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed of size 25 mm dia.

Supply and laying GI tubing medium grade with all fittings(ISI Marked) and fixed complete laid in trenches complete all as specified and directed of size 20 mm dia.

Supply and fixing in replacement Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete of size 25 mm dia all as directed.

Supply and fixing in replacement Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete of size 20 mm dia all as directed.

Bhawani Enterprises (BID ID -3264712)

M/S DEWASI CONSTRUCTION CO (BID ID -3257020)

NISHA CONSTRUCTIONS (BID ID -3264325)

M/S KARNINCONSTRUCTION COMPANY (BID ID -3269772)