Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.0 Cr
EMD Value
₹3.0 L
Closing Date
19 Nov 2026, 6:05 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Dahod (R & B) Division, Dahod
Construction of New Anaj Godown building 1000 M.T. capacity at Devgadh baria Dist. Dahod (Deposit work)
363797
17 of 2026-27
Open
Civil Works - Buildings
Works
Dahod
2 documents required · 2 mandatory
₹6,000
Executive Engineer, Dahod (R&B) Division, Dahod
₹3.0 L
6 Nov 2026
6 Nov 2026
6 Nov 2026
19 Nov 2026
6 Nov 2026
90 days
No. Figure Amount
1 Excavation for foundation upto 1.50 mt depth including sorting out and 1568.00 Cum 275.33
stacking of useful materials and disposing the excavated stuff within all lead
and lift for Hard murrum.
2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting 1323.00 Cum 309.04
out and stacking of useful materials and disposing the excavated stuff within
all lead and lift (D) Soft rock not requiring blasting.
3 Filling in foundation and plinth with sand in layers of 20 cm. thickness 202.00 Cum 419.82
including watering, ramming and consolidating etc. complete.
4 Filling available excavated earth (excluding rock) in trenches plinth side of 1900.00 Cum 137.47
foundation etc. in layer not exceeding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete.
cm thickness including watering, ramming and consolidation etc. complete.
6 Carrying out plinth treatment to post construction / existing structure by 636.00 Sq.m. 68.59
spraying chemical solution for termite control treatment including labour and
materials consistent with I.S.I specification.
7 Providing and laying controlled cement concrete M-150 and curing complete 177.00 Cum 3861.37
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Foundations, footings & mass concrete.
8 Providing and laying controlled cement concrete M-250 and curing complete 432.00 Cum 4517.73
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Foundations, footings & mass concrete.
9 Providing and laying controlled cement concrete M-250 and curing complete 68.00 Cum 7660.85
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Columns for Ground floor upto plinth.
10 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 86.00 Cum 3006.91
graded brick bat aggregate 40mm normal size) and curing complete
excluding cost of formwork in foundation and plinth.
11 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 300.00 Cum 2801.88
hand broken stone aggregate 40 mm nominal size) and curing complete
including cost of form work in foundation and plinth.
12 Providing and laying controlled cement concrete M-200 and curing complete 58.00 Cum 7861.84
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Columns for all floors.
13 Providing and laying controlled cement concrete M-250 and curing complete 122.00 Cum 5944.86
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in plinth beams.
14 Providing and laying controlled cement concrete M-200 and curing complete 88.00 Cum 6252.91
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Beams for all floors.
15 Providing and laying controlled cement concrete M-200 and curing complete 15.00 Cum 7742.66
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Lintels for all floors.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
16 Providing and laying controlled cement concrete M-200 and curing complete 46.00 Cum 6607.42
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Chhajjas for all floors.
17 Providing and laying controlled cement concrete M-200 and curing complete 28.00 Cum 7377.04
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work in Drop paradi for Ground floor.
18 Providing and laying 200 mm thick cement concrete M-200 and curing 649.00 Sq.m. 1072.62
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in FLOORING SLABS and
curing including cost of form work. Compaction and finishing of cement
concrete road by trimix process inclusive of labour charges for the trimix
vacuum dewatering process on cement concrete road surface by using
vacuum dewatering pump, surface floater, surface vibrator including
Channelling & making grooves and rough finish to surface by providing
expansion Joints, Contraction joints & construction joints with filling of joints
with asphalt filler as directed by Engineer In charge & as per specification.
19 Providing and laying controlled cement concrete M-150 and curing complete 15.00 Cum 5239.88
including the cost of form work but excluding cost of reinforcement for
reinforced concrete work for R.C.C. work.
20 Providing and laying controlled cement concrete M-200 and curing complete 26.00 Cum 7404.31
including the cost of form work but excluding cost of reinforcement for
R.C.C work in Slab for all floor.
21 Providing I.S.I. Mark T.M.T. bar Fe-500D bar reinforcement for R.C.C. work 119611.00 Kg. 77.29
including bending, binding and placing in position complete for all floor.
22 Providing and laying brick work using common burnt clay building 106.00 Cum 3853.23
conventional type bricks having crushing strength not less than
Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine
sand) including the cost of all materials and labour charges etc. complete.
23 Providing and laying brick work using common burnt clay building 212.00 Cum 4173.32
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure in cement mortar 1:6 (1 cement : 6 fine sand)
for all floor including the cost of all materials and labour charges etc.
24 Providing and fixing rolling shutters of approved make made of 80 mm wide 50.00 Sq.m. 3554.40
M.S. laths inter-locked together through their entire length and jointed
together at the end locks mounted on specially designed pipe shaft with
bracket plates, guide channels and arrangements for inside and outside
locking with push-pull operation including the cost of hood cover and spring
etc. complete (A) Shutters having width below 3.5 mt.
25 Providing and fixing M.S. grill using 16 mm dia. M.S. bars @ 15 cm C/C 17.00 Sq.m. 2395.72
fixed in frame using angle 35 mm x 6 mm, 35 x 6 mm flat in center and
galvanized wiremesh jali 20mm x 20 mm spacing including red lead primer
coat and two coats of oil painting etc. complete.
26 Providing and fixing Glass bricks Partition using glass brick of required 37.00 Sq.m. 7600.25
design type size of glass brick 19 cm x 19 cm x 8cm and fixing the same
with 4 mm dia. aluminium bar at every 3rd layer with white cement etc.
27 Providing and laying Kota stone slab flooring over 20mm (average) thick 749.00 Sq.m. 1019.39
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime
putty :1.5 - coarse sand) laid over and jointed with grey cement slurry
including rubbing and polishing etc. complete. (A) 25mm thick.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
28 Providing 15 mm thick cement mala trowel finished plaster in single coat on 2048.00 Sq.m. 201.79
fair side brick / concrete wall for interior plastering up to floor two level and
finished even and smooth in cement mortar 1:3 (1 cement : 3 sand) for
Ground floor.
29 Providing 10 mm. thick cement plaster in single coat for plastering on ceiling 602.00 Sq.m. 150.67
and soffits of stairs upto floor two level and finished even and smooth in
cement mortar 1:3 (1 cement : 3 sand) for Ground floor.
30 Providing and laying water proofing treatment with china mosaic tiles 113.00 Sq.m. 1135.39
flooring over avg 50 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit
to 12 mm size} bedding for maintaining slope for plain and curve surface &
12 mm to 20 mm of broken piece of ceramic / glazed tiles (one for more
color as directed) to be laid over cement mortar bedding of C M 1:3 (1
cement : 3 sand) containing one Kg of water proofing materials per bag of
O.P.C. at plain or / and slops and to be tempered to bring mortar ceramic
up to surface with using white cement and colour pigment including
rounding of junctions and extending them up to 15 cm along the wall and
curing with bends any patterns or design as per drawing and cleaning by
using oxalic acid etc complete.
31 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse 77.00 Sq.m. 355.69
sand : 4-graded stone aggregate 12mm nominal size) laid in one layer and
finished with a floating coat of neat cement. (B) Average 50mm thick for
china mosaic bedding on terrace.
32 Wall painting (two coats) with plastic emulsion paint of approved brand and 1977.00 Sq.m. 125.41
manufacture on undecorated wall surface to give an even shade including
throughly brushing the surface free from mortar droppings and other foreign
matter and sand papered smooth including applying two coats of Birla or
Asian acrylic lapy (putty) & two coats of primer of approved brand and
manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other foreign
matter and sand papered smooth.
33 Providing 20mm thick sand faced cement plaster on walls up to height 10 1451.00 Sq.m. 353.98
meters above ground level consisting of 12mm thick backing coat of C.M.
1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C.M. 1:1 (1 cement
: 1 sand) etc. complete.
34 Finishing wall with water proofing cement paint of approved brand and 1414.00 Sq.m. 65.85
manufacture and of required shade on wall surface (three coats) to give an
even shade after thoroughly brushing the surface to remove all dirt and
remains of loose powered materials.
35 Providing and fixing PROFLEX type self supported Roof (Arch Type) using 1375.00 Sq.m. 2058.38
Cold rolled, Galvalume steel colour coated sheet 1.0mm thick conforming to
ASTMA 653, A792 DIN, ALU Zinc Coating : AZ150 and Regular Modified
Polyster painting with epoxy primer service coat at bottom including
necessary fixtures & fastening for Lighting arrangement and turbo ventilator
with sky light.
36 Providing and fixing Turbo Ventilator made from Alluminium and stainless 9.00 No. 20831.25
steel with ploy Carbonate Sky Light of size 2' x 7' feet including fixing in roof
with ISI mark chemical water proofing as directed by Engineer in charge
etc. complete.
37 Providing and fixing machine cut free edges, pre mirror polished Green 91.00 Sq.m. 2124.03
marble stone slab 16mm to 18 mm thick in single piece) for doors &
windows sill, jambs & cladding as per design including full moulded round
front edge and 1cm both side nosing on 20 mm thick cement mortar 1:6 (1
cement : 6 coarse sand) jointed with grey cement slurry including rubbing,
polishing & Finishing etc. complete.
38 Providing throttling or plaster drip and molding to R.C.C. Chhajja. 242.00 Rmt. 44.07
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
39 Providing and laying brick work using common burnt clay building 23.00 Cum 3884.00
conventional type bricks having crushing strength not less than
Kg./Sq.cm. in foundation and plinth in cement mortar 1:5 (1 cement : 5 fine
sand) including the cost of all materials and labour charges etc. complete.
40 Applying general insecticide pest control treatment to floors, cupboards etc 96.00 Sq.m. 54.39
including labour material etc. complete. Using Imidacloprid 30.5 SC as per
6113 part -II Concentration Weight (0.075% by mass) is recommended
ml Chemical diluted with 5 Liters of water application 0.5 liter chemical/Sqm
of surface is recommended as per IS.
41 Providing and fixing door Double shutter having factory fabricated standard 3.00 Sq.m. 10304.02
extruded aluminium colour anodized hollow section 19552 weight is not less
than 1.1 kg/mtr {Section 63.50 x 38 mm x 2.50 mm thick} for door frame,
hollow portion of door frame shall be filled with wood to be insert for durable
grip of door hinges, with factory made 38 mm thick double shutter pivoted
flush door with floor spring with both side pre 1mm laminated sheet with
Lever Mortice lock, SS aldrop 30cm long, SS handle size 60 cm long,
Tower bolt size 20 cm etc. as per detail colour & pattern approved by this
office including necessary anodized alluminum fixtures and fastenings.
42 Providing & fixing FRP frame size 125 x 65 mm and 35mm thick FRP single 4.00 Sq.m. 2377.76
shutter / Double shutter having extra reinforcement on sides & edges in
polish finish. The core of the shutter & frame is to be filed up with injected
polyurethene foam done in situ alongwith embedded wooden pieces for
stiffening & also taking hinges & fintures. The whole FRP frame & shutter is
to be water proof weather proof, termite proof & resistance to mild acid /
alkali. Rates are to be inclusive of S.S. hinges with necessary screws &
alluminium S.S. fixtures & fastenings & fastener sleeve.
43 Providing and fixing window having extruded aluminum colour anodized 13.00 Sq.m. 1583.95
section frame main outer size 95mm x 24mm x 1.17mm@ wt.of
Kg/mt, horizontal three track member size 92mm x 31.75mm x 1.30mm,@
Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.
1.06 Kg/mt with sliding shutters of horizontal member size 40 mm x 18mm x
1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x
1.29 mm @ wt.of 0.456 Kg/mt. with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as per details etc. complete.
44 Providing and fixing standard extruded of alluminium section of size 63.50 x 2.00 Sq.m. 1525.00
38.10 x 1.95 mm, @ Wt 1.094Kg / Rmt with colour anodized alluminium
frame with 5 mm thick transparent bronze colour tinted float glass as details
etc. complete.
45 Providing and fixing safety grills of required pattern for windows, door using 1481.60 Kg. 117.25
required size of M.S. polished bars at specified spacing inserted and welded
from inside to rectangular box type frame CRC pipes of required size at
required spacing as per design and hold fasting with coach bolts including
one coat of primer and two coats of matt finished oil painting etc. complete.
46 Providing and laying 10mm thick Glazed Vitrified tiles in flooring treads of 117.00 Sq.m. 1605.90
steps and landing laid over 20mm (average) thick base of cement mortar
1:6 (1 cement : 6 coarse sand) laid over and jointed with white cement
slurry including finishing with flush pointing and cleaning the surface etc.
47 Providing and laying 10mm thick Glazed Vitrified tiles in skirting, risers of 11.00 Sq.m. 1242.30
steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse
sand) and jointed with white cement slurry.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
48 Providing and laying water proofing treatment with china mosaic tiles 214.00 Sq.m. 1084.09
flooring over avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit
to 12 mm size} bedding for maintaining slope for plain and curve surface &
12 mm to 20 mm of broken piece of ceramic / glazed tiles (one for more
color as directed) to be laid over cement mortar bedding of C M 1:3 (1
cement : 3 sand) containing one Kg of water proofing materials per bag of
O.P.C. at plain or / and slops and to be tempered to bring mortar ceramic
up to surface with using white cement and colour pigment including
rounding of junctions and extending them up to 15 cm along the wall and
curing with bends any patterns or design as per drawing and cleaning by
using oxalic acid etc complete.
49 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 71.00 Sq.m. 1523.67
mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on
mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with
white cement slurry.
50 Providing and laying 30cm x 30 cm Ceramic tiles 6mm thick in flooring 7.00 Sq.m. 1017.30
treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3
(1-cement : 3-coarse sand) finishing with flush pointing in white cement.
51 Providing and laying machine cut free edges, machine polished Telephone 6.00 Sq.m. 1755.38
black Madras Granite Marble Stone slab 18 mm thick (single piece not more
thane 1.5mtr) for top of basin for drinking water other necessary place as
per design including full moulded round front edge and 1cm nosing and
necessary groove laid on 20 mm thick cement mortar 1:6 (1 cement :
coarse sand) jointed with grey cement slurry including rubbing, polishing &
finishing etc. complete.
52 Wall painting (two coats) with plastic emulsion paint of approved brand and 182.00 Sq.m. 131.07
manufacture on undecorated wall surface to give an even shade including
throughly brushing the surface free from mortar droppings and other foreign
matter and sand papered smooth including Applying two coats of Birla or
Asian acrylic lapy (putty) & two coats of primer of approved brand and
manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other foreign
matter and sand papered smooth on ceiling and Soffits of slab.
53 Finishing wall with weather proof exterior emulsion paint on wall surface 571.00 Sq.m. 122.14
(two coats) to give an required shape even shade after thoroughly brushing
the surface to remove all dirt, dust and remains of loose powdered materials
etc. complete.
54 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 240.00 Rmt. 148.12
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
55 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 240.00 Rmt. 91.84
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
56 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 80.00 Rmt. 72.65
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
57 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm 16.00 No. 588.26
diameter with jali of the following nominal diameter of self cleaning design
with C.I. screwed down or hinged grating including the cost of cutting and
making good the walls.
58 Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber 4.00 No. 1246.92
and water tight C.I. cover with frame of 300 x 300 mm size (inside) with
standard weight (i) square mouth traps (B) 150mm x 100mm size P or R
59 Providing and fixing screw down bib taps of following size.(A) Brass screw 16.00 No. 186.83
down bib tap polished bright. (i) 15mm dia. as directed by Engineer in
60 Providing and fixing Table top wash basin of size 610 x 450mm (Brand 2.00 No. 4862.14
Varmora or equivalent) with C.P. brass waste for washbasin or sink &
20mm pillar tap, bottle trap capstan head, screw down high pressure with
screws, shanks and back nuts. (i) 32mm dia. providing and fixing brass
screw down stop tap. (A) 20mm dia.
61 Providing and fixing wash down water closet (Wall Hung W.C. Pan) with 2.00 No. 13067.38
integral P or S trap and 50 mm dia. Metropol push valve with complete
fittings including cutting holes in walls and making good the same
connecting the flush bend with cistern and closet etc. complete including
plastic seat cover and including jointing trap with waste pipe overall size as
62 Providing and fixing Wall hung fitting for urinal approved quality including 2.00 No. 12665.40
concealed inlet and outlet better hygiene connection the urinal with waste
pipe tap etc. complete. (A) White earthenware flat back or corner type size
of size 350 x 340 x 615 mm of y including fixing of C.P. brass waste pipe &
15mm brass stop tap including cost of all materials & labour charges etc.
complete equivalent.
63 Providing, erecting and fixing double coated I.S.I. Mark P.V.C. water tank of 1500.00 Litre 3.95
required capacity each with all necessary fittings and connection etc.
complete on terrace as directed.
64 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets 3.00 No. 616.42
fixed to wooden plugs with C.P. brass scews. (B) 600mm x 20mm size.
65 Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket 3.00 No. 559.20
and guard rail complete mixed to wooden plug with C.P. brass screws.
66 Providing and fixing Gun metal check or non-return fullway wheel valve. (C) 3.00 No. 420.63
67 Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 3.00 No. 663.43
68 Providing, laying and jointing in true line and level I.S.I. mark 110mm dia. 36.00 Rmt. 897.79
U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end plain and
other end socketed with rubbering & fitting conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diameter x 149 mm length x 145 mm height at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
all materials.
69 Providing and fixing in position cowl vent to pipes (C) 75mm dia. as 6.00 No. 393.04
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
70 Constructing brick masonry chamber for underground C.I. Inspection 8.00 No. 2932.93
chamber and bends with bricks having crushing strength not less than
Kg./cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
internal dimensions total weight of cover with frame to be not less than
Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat of neat cement on walls and bed
concrete etc. complete. (i) Inside dimensions 455mm x 610mm and 450mm
deep for single pipe line.
71 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete 622.00 Sq.m. 702.02
block 60mm thick with grade of concrete M-300 pneumatic compressed /
vibrated mechanically and as per approved design confirming to IS 15658 :
2006 including 35 mm sand layer for levelling and filling the joint with sand
in proper line and level as per guidelines of IRC : SP 63-2018 etc. complete.
72 Providing and construction 2.28 mt inner dia and 6.50mt deep sock pit 2.00 No. 51380.72
including excavation BBCC, Brick masonary work at bottom and top
including RCC Slab at top in honey combica masonary in mud goober as
73 Providing and laying controlled cement concrete M-250 and curing complete 25.00 Cum 6075.15
excluding the cost of formwork and reinforcement for reinforced concrete
work in (B) Walls, from top of foundation level upto floor two level for Sump.
74 Providing and fixing Fiber Manhole cover 750 mm x 750 mm size with cover 2.00 No. 1262.50
frame having 5 MT load carrying capacity etc. complete.
75 Providing and laying White / Colour glazed tiles 60 cm x 30 cm size & 6 86.00 Sq.m. 1017.48
mm. thick in skirting, risers of steps and dedo on 10 mm. thick cement
plaster 1:3 (1 cement : 3 coarse sand) pointing in white cement and jointed
with white cement slurry. Shade and pattern approved by Architect Office.
76 Supplying and fixing reinforced concrete heavy duty non-pressure pipes 150.00 Rmt. 1095.18
with collars for culverts including setting and joining the pipes in C.M. 1:2
watering and laying (to level of slops of I.S. 458 / 1971 Class NP3 casted by
vertically vibrated technology of following internal diameter. (i) 300mm dia.
77 Constructing brick masonry chamber for underground C.I. Inspection 6.00 No. 3660.76
chamber and bends with bricks having crushing strength not less than
Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
internal dimensions total weight of cover with frame to be not less than
Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slab with
1:2:4 mix (1-cement : 2 coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat of neat cement on walls and bed
concrete etc. complete. (ii) Inside dimensions 500mm x 700 mm and
450mm deep for pipe line with one or two inlets.
78 Extra over items for every additional depth of 0.1 m or part thereof beyond 30.00 No. 264.86
450mm depth for brick masonary chamber (ii) for 500mm x 700mm size.
79 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and 5.00 Sq.m. 3824.20
diagonal braces of 40 x 40 x 6 mm angle iron, 3.15 mm M.S. gusset plates
at junctions and corners 25 mm dia. pulley, 40 x 40 x 6mm angle and T-iron
guide rail at top and bottom respectively with handles, stoppers and locking
arrangement etc. including applying a priming coat of red lead paint.
80 Box cutting the road surface to proper slop and camber for making a base 330.00 Cum 112.02
of road work including removing the excavated stuff and depositing on the
road side slope as directed for all lead and lift.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
81 Providing and laying compacted W.B.M. 150 mm thick of machine crushed 110.00 Cum 2213.92
B.T. metal of size 45 mm to 63 mm with using 0.12/ cmt./10 Smt stone
screenings as filler and binding material 0.06 cum./ 10 Smt. including
spreading, watering & consolidation by vibratory roller etc. complete.
82 Providing and laying in position Ready Mix M-300 grade control concrete 165.00 Cum 6036.77
with ironite material 4 Kg. / Sqm for reinforced cement concrete work, using
cement content as per approved design mix manufactured in fully automatic
batching plant and transported to site of work in transit mixer for lead up to
10 kkms having continous agitated mixer, manufactured as per mix design
of specified grade for reinforced cement concrete work including pumping of
R.M.C. from transit mixer to site of laying, excluding the cost of centering
shuttering finishing and reinforcement including cost of admixtures in
recommended proportions as per IS : 9103 to accelerate/ retard setting of
concrete, improve workability without impairing strength and durability as
per direction of the Engineer in charge without Fly Ash (Min cement level as
per latest IS 456 shall be maintained) including labour charges for Trimix
process, it is floater, surface vibrator, vacume etc. complete.
83 Providing and fixing precast concrete kerb stone of gray cement based 304.00 Rmt. 417.13
concrete block 30cm length, 30cm height and 15cm thick of M-250 grade
concrete as per approved design and including excavation for fixing in
proper line and level, filling the joint with C:M 1:3 (1 cement : 3 fine sand)
etc. complete with oil paint colour to Kerb by Yellow/white and Black patta
(three Coat) one coat of priming & two coat of oil paint including cost of
material required for paint and all labour work etc. complete as per
direction, detailed drawing and instruction of engineer incharge. (including
epoxy paint of approved quality)
84 Providing pre-moulded asphalt filler joints as per drawings. (A) 12mm 2.00 Sq.m. 703.53
85 Clearing and grubbing road land including uprooting rank vegetation grass 0.18 Hect. 86262.08
bushes, shrubs, sapling and trees girth upto 300 mm removal of stumps of
trees cut earlier and disposal of unserviceable materials (C) By mechanical
means in area of thorny jungle.
86 Earthwork for embankment including breaking clods, dressing with all lead 810.00 Cum 182.14
and lift and including watering rolling and consolidation of subgrade in layers
at O.M.C. to required dry density including filling the depression which occur
during the process using power roller 8T to 10T. (E) From borrow area
within 3.0 Km. lead
87 Providing, supplying and plantation of trees like Palm tree, Tarneliya, kadam 100.00 No. 505.00
and other decorative plant with minimum 10 fit height including digging 0.6 x
0.6 x 0.6 cm size pits, preparing soil, providing and mixing organic fertilizer,
watering, planting and filling the pits as per direction including etc. complete.
88 Providing and erecting open well type horizontal monoblock pumpset with 1.00 No. 7928.50
C.I. body having following specification (I) 1 H.P. single phase open well
motor pumpset suitable for 145 ltr / min (ii) suitable for 32 dia. delivery pipe
with control panel & 10 mt.
89 Lawn Grass :- Filling the area up to the depth of 23 cm. with good quality of 300.00 Sq.m. 252.50
field fertile soil, breaking the clods leveling the area, free from stone grass
roots etc. and farm yard manure at the rate of 5 cum. per 100 sq. mt. mixing
the same with layer of soil, levelling rolling, pre planting, watering etc. and
planting the lawn grass of approved variety at 10 x 10 cm. distance etc.
complete as per detail specification and maintenance for 3 months.
90 Demolition including stacking of serviceable materials & disposal of 56.04 Cum 1108.12
unserviceable materials with all lead & lift. (i) R.C.C. work
91 Dismentalling tiled or stone floors in mortar including stacking of serviceable 41.78 Sq.m. 50.27
materials and disposal of unserviceable materials with all lead & lift.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
92 Demolition of brick work & stone masonary including stacking of serviceable 261.21 Cum 576.29
materials & disposal of unserviceable materials with all lead & lift. (ii) in
cement mortar
93 Dismentalling doors, windows, ventilators etc.(wood or steel) shutters 60.00 No. 196.65
including chowkhats, architraves, hold fasts & other attachments etc.
complete & stacking the materials with all lead & lift. (i) Not exceeding
smt. in area
94 Dismentalling doors, windows, ventilators etc.(wood or steel) shutters 2.00 No. 263.34
including chowkhats, architraves, hold fasts & other attachments etc.
complete & stacking the materials with all lead & lift. (ii) Exceeding 3 Sq.mt.
95 Dismantaling steel work including dismembering and stacking the materials 4148.24 Kg. 3.93
with all lead and lift.
96 Dismentaling of sheet roofing including ridges, hips, valleys, gutters etc. 875.00 Sq.m. 50.27
stacking of serviceable materials and disposal of unserviceable materials
with all lead and lift. (i) G.I. sheet roofing.
Electrical Items
97 Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 15.00 Pt. 582.77
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected with
6A Modular type switch/ bell push & accessories and earth continuity of
following type, erected on PVC / Metallic / Wooden box, single mounting
base frame covered with textured / metallic / white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder / ceiling rose / H.D. Connector as directed. (f) with medium class
Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.
Cat-III [Make :- (1) Accessories :- Havells (Crabtree), Legrand, Schneider
Electric, L&T, Achor (Roma), 2) Wire :- Finolex, Havells, RR Cable,
Polycab, KEI, 3) Pipe :- Precision, Nihir, Anchor, Polycab, Vraj]
98 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 3.00 Pt. 809.01
both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected on
PVC / Metallic / Wooden box, single mounting base frame covered with
textured / metallic / white front plate modules erected on / in wall/ ceiling as
per pipe erected with necessary ceiling rose/ H.D. Connector as directed. (f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall / ceiling complete, Cat-III [Make :- 1) Accessories :- Havells (Crabtree),
Legrand, Schneider Electric, L&T, Achor (Roma), 2) Wire :- Finolex,
Havells, RR Cable, Polycab, KEI, 3) Pipe :- Precision, Nihir, Anchor,
Polycab, Vraj]
99 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both 5.00 Pt. 894.86
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe erected complete with
Modular type switch & 5 pin Plug erected on PVC/ Metallic / Wooden box
covered with appropriate front plate modules erected on/ in wall / ceiling as
per pipe erected with following type of accessories. [II] For 16A Plug and
16A switch with 2-2.5 sq.mm Cu. Wire from mcb db board., (f) with medium
class Rigid PVC pipe and accessories erected concealed in wall / ceiling
complete, Cat-III [Make :- 1) Accessories :- Havells (Crabtree), Legrand,
Schneider Electric, L&T, Achor (Roma), 2) Wire :- Finolex, Havells, RR
Cable, Polycab, KEI, 3) Pipe :- Precision, Nihir, Anchor, Polycab, Vraj]
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby 2.00 Pt. 612.06
switchboard/ mcb db board (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall / ceiling complete, Cat-III [Make :- 1)
Accessories :- Havells (Crabtree), Legrand, Schneider Electric, L&T, Achor
(Roma), 2) Wire :- Finolex, Havells, RR Cable, Polycab, KEI, 3) Pipe :-
Precision, Nihir, Anchor, Polycab, Vraj]
100 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 10.00 Pt. 309.06
socket erected on PVC / Metallic / Wooden box, single mounting base
frame covered with textured/ metallic / white front plate modules erected on/
in wall / ceiling with following type accessories Cat-III [Make :- 1)
Accessories :- Havells (Crabtree), Legrand, Schneider Electric, L&T, Achor
101 Providing following type of Modular Type Accessories mounted with PVC / 8.00 Nos. 25.25
metallic / Wooden box, single mounting base frame covered with textured /
metallic / white front plate, modules erected with necessary connections as
per site situation directed by Engineer In charge. (7) Blank Plate Single, Cat-
102 Providing & erecting Switch board for Computer or electric apparatus 2.00 Nos. 1133.22
consisting of following modular type accessories mounted with PVC /
Metallic concealed/ open box with single mounting base frame covered with
textured / metallic / white front plate, modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch, 3 nos. 6A 5 pin Plug, Cat-III [Make :- 1) Accessories :-
Havells (Crabtree), Legrand, Schneider Electric, L&T, Achor (Roma)]
103 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 280.00 Mtr. 104.03
conductor wire in following type of pipe to be erected concealed in /flushed
on wall/ ceiling, with 1.5 sq.mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of following size (a) with
medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.mm [Make :-
1) Wire :- Finolex, Havells, RR Cable, Polycab, KEI, 2) Pipe :- Precision,
Nihir, Anchor, Polycab, Vraj]
104 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 30.00 Mtr. 140.39
conductor wire in following type of pipe to be erected in / on wall / ceiling
with 2.5 sq.mm copper conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size (a) with medium class
Rigid PVC pipe and accessories (a) 2 wire 4 sq.mm [Make :- 1) Wire :-
Finolex, Havells, RR Cable, Polycab, KEI, 2) Pipe :- Precision, Nihir,
Anchor, Polycab, Vraj]
105 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv 129.00 Mtr. 58.58
grade ISI marked copper wires of following size to be erected as directed.
(e) 1.50 Sq.mm 3 core round PVC sheathed [Make :- 1) Wire :- Finolex,
Havells, RR Cable, Polycab, KEI]
106 Approved make Four pole moulded case circuit breaker having breaking 2.00 Nos. 6790.23
capacity ICU of 25 KA. at 415 V, having normal current rating up to 25 A to
100A. with fixed thermal & magnetic release suitable to work on A.C. supply
50 c/s. with all internal connections & complete erected in existing
G.M.S. housing. ICS=100% of ICU only, Cat III [Make :- L&T, Hager,
Havells, C&S, Siemens, Legrand]
107 Approved make Earth fault Relay suitable to mount with inter connection to 1.00 Nos. 5156.05
moulded case circuit breaker having CT ratio & MCCB rating as following
along with shunt trip 220V AC. with all internal connections & complete
erected in existing M.S.housing, (1) 15 A -100 A , CT Ratio 1/100 [Make :-
L&T, Hager, Havells, C&S, Siemens, Legrand]
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
108 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 0.50 Rn. 1961.42
Copper Busbars with four equal Nos. of electrolyte bus having current Mtr.
density not more than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in existing cubical panel
with necessary connections. (A) Suitable for 100 Amp. Capacity
109 Providing and erecting Miniature circuit breaker single pole 6A to 25A 6.00 Nos. 123.22
suitable to operate on 240 V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
Cat-III [Make :- L&T, Hager, Havells, C&S, Siemens, Legrand]
110 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 34.00 Nos. 297.95
system and having breaking capacity 10 KA to be erected in existing box
confirming to IS 8828/ 1996 with ISI Mark, Cat-III [Make :- L&T, Hager,
Havells, C&S, Siemens, Legrand]
111 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 2.00 Nos. 655.49
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having capacity, (a) 6 to 32 Amp. Cat-III [Make :- L&T, Hager, Havells,
C&S, Siemens, Legrand]
112 Providing & erecting 240 V MCB double pole switch for lighting Load (B 7.00 Nos. 306.03
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing
box having following capacity (A) 6 to 32 Amp. Cat-III [Make :- L&T, Hager,
Havells, C&S, Siemens, Legrand]
113 Providing and erecting Sheet Steel powder coated MCB distribution board - 1.00 Nos. 1152.41
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of
MCB to be used) suitable for, (A) single phase incoming and horizontal
single phase outgoing type (PPI) (b) sheet steel double door (IP-43) (iii)8
way [Make :- L&T, Hager, Havells, C&S, Siemens, Legrand]
114 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 1.00 Nos. 2458.34
sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and
suitable for operation on single phase 240 V. having characteristic of quick
action & tripping with all advance feature & do not incorporate any electronic
component for following Max. rating erected as directed (ii) 40 Amps. DP,
Cat-III [Make :- L&T, Hager, Havells, C&S, Siemens, Legrand]
115 Supplying & erecting earth pit of minimum bore dia.150mm size approved 2.00 Nos. 4591.46
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I. pipes having outer pipe dia of
50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal dia of 12mm with constant
ohmic value surrounded by highly conductive compound with high charge
dissipation suitable for following type of applications with chamber and
heavy duty cover. (A) (approved make OEM has to submit test certificate
including value of earth resistance of installation duly stamped and signed
by agency and officer Incharge has to ensure the value of earthing resistane
mentioned in test Certificate) & having back filling compound of (B) Inner
chemical (CCM Compound)- Resistivity :- 0.2 ohm / meter testing as per
IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar
content:- <2% (C) Back fill Compound :- Earthing compound should be
capable to retain moisture for long time necessary test report must be
submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil,
Length of pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg
116 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 Kg. 794.87
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
117 Providing & erecting weather proof, dust & vermin proof, floor mounted front 1.00 Sq. 10468.65
operated indoor type cubical panel board necessary IP-42 protection & mtr.
above as per requirement made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S. sheet for internal partitions
with necessary supporting angles, flats including cutting, bending, drilling,
welding, riveting with internal partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of supplied switch gears,
BUSBARS, with suitable size of inter connecting PVC copper wire / copper-
aluminium strips, rubber grommets, rib, Bakelite control fuses for measuring
instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking arrangement and
rubber gasket, heavy duty end terminal connection complete.
The Panel shall be painted with epoxy powder coating. (The rates excludes
the cost of switchgears, bus bars, inter connecting mains & Copper
Aluminium strips, meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with following approved
manufacturers with following size. (B) locally fabricated panel board, (i) with
350 mm depth
118 Providing & erecting High Voltage Danger Notice Board sticker of standard 1.00 Nos. 35.35
119 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 100.00 Mtr. 220.18
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq.mm
(16 Sq.mm 1/2 core) [Make:- Havells, KEI, Finolex, RR Cable, Polycab]
120 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 610.00 Mtr. 151.50
/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of cables (B) 4 core
Sq.mm [Make:- Havells, KEI, Finolex, RR Cable, Polycab]
(c) 4 core 10 Sq. mm [Make:- Havells, KEI, Finolex, RR Cable, Polycab] 100.00 Mtr. 168.67
121 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable 250.00 Mtr. 112.11
Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or
in existing trench / pipe of following size of cables. (B) 2 core 6 Sq. mm
[Make:- Havells, KEI, Finolex, RR Cable, Polycab]
122 Providing & laying approved make Double walled corrugated pipes (DWC) 680.00 Mtr. 62.62
of polyethylene (conforming to IS 14930 II) with necessary connecting
accessories of same material at required depth for laying of cable below
ground / road surface for enclosing cable (A) 50 mm inner dia.
123 Providing and fixing heavy duty flange type brass cable gland with rubber 2.00 Nos. 66.66
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc. for following size of cables. (A) 3 & 1/2 / 4 core
124 Solderless crimping type Aluminium lugs conforming to IS suitable for cable 6.00 Nos. 15.15
of following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass / cadmium plated nut bolts in an approved
manner. (C) 16/25 Sq.mm.
(A) 1.5/ 2.5/4/6 Sq.mm 26.00 Nos. 6.06
125 Providing & erecting Approved make Ceiling Fan with double ball bearing 3.00 Nos. 1982.63
with Condenser 230 volt A.C.50 Hz. 900 mm sweep complete having
Aluminium blades, canopy erected complete. [ Make shall be approved by
Engineer in Charge] [Make:- Crompton, Usha, Havells, Orient, Anchor]
126 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 3.00 Mtr. 108.07
down rod erected duly painted for fan complete with proper insulation
without leckage and earthing.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
127 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the 3.00 Nos. 108.07
RCC bars up to 50mm length each side and pierced through a 16 Gauge
M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with
necessary finishing.
128 Supplying & erecting approved make low noise decorative exhaust fan 1.00 Nos. 1703.87
having square frame ABS body with inbuilt lowers & square frame. 200mm
with 1350RPM Cat.II [Make:- Crompton, Usha, Havells, Orient, Anchor]
129 Providing recess in wall or window frame suitable for erection of Exhaust 1.00 Nos. 189.88
fan complete with plastering and color washing to match the colour of the
wall or window complete with expanded metal in order to render the fitting in
accessible and the room water-proof.
130 Supplying and erecting approved make Octagonal pole made from HR 18.00 Nos. 7561.87
sheet steel. The pole should be made as per IS. and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind
speed with integral Junction box consist of terminal plate of min 6mm Hylam
sheet, standard profile 35mm x 7.5mm Din-Rail for MCB Mounting, stud
type terminal and arrangement for cable termination to be erected With
Suitable foundation (Included) as per details given by manufacturer
considering site requirement. (C) 5 Mtr. Long 70 mm top x 130 mm bottom
dia, 3 mm thickness with 200mm x 200mm x 12mm base plate, 4-M16 Bolts
and 600mm long with necessary G.I. J Bolts. Approx Pole weight 46 kg
[Make:- Valmont, Bajaj, Transrail, Jindal, Utkarsh]
131 Supplying and erecting Street light pole bracket comprising main B Class GI 15.00 Nos. 491.87
pipe of 4.2 cm/ require outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms. length and suitable for 76.5mm / 80mm /
require size of pole top having nuts and bolts for fixing the brackets and
having spread of 0.5 mtr. Length with 110 deg. with vertical plane and
suitable welded stiffener reducer and nipple with check nut complete
painted with one coat.of red oxide/ PU base primer and two coats of
Aluminium/ PU paint. paint with following nos of arms. [A] Single Arm
bracket 0.5 Mtr
[B] Double Arm Bracket 0.5 Mtr 3.00 Nos. 622.16
132 Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 18.00 Nos. 343.40
cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,
erected on wall or corner for mounting street light luminaire with necessary
hardware materials duly painted.
133 For using salt and charcoal / coke as required for pipe type earthing. 18.00 Nos. 171.70
134 Making trench in soft soil of suitable width of 90 cms deep for laying cable 650.00 Mtr. 55.55
or locating the fault all over the run and backfilling the same and making
the surface as normal ground.
135 Supplying & erecting approved make IP 55 grade Company fabricated 1.00 Nos. 13350.18
Timer Panel of following capacity for switch On-Off street lights on time
scheduling basis made from 16G CRCA sheet duly epoxy power painted
inside and outside with hinged doors and locking arrangement consisting of
suitable size of 4 Pole MCB and 4 pole contactor (Cat-III) with analog time
switch, auto manual switch of same make and suitable input and output
Bakelite terminals and with door earthing approved by Engineer in charge.
136 Supplying and erecting approved make panel mounting type Digital 1.00 Nos. 1275.63
Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on
existing panel board with all connection, wiring etc. with manufacturers
calibration certificate.
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
137 Supplying and erecting approved make panel mounting type Digital 1.00 Nos. 1558.43
Ammeter having 3 digits LED display, external CT operated, calibrated for
to 1000 Amps suitable to operate on 500 Volt AC, erected on existing panel
board with all connection, wiring etc. with manufacturers calibration
certificate.
138 Supplying and erecting approved make set of indicator lamps of LED type 3.00 Nos. 43.43
lamp, lens cover, Bakelite holder complete erected with necessary
connections
AC Supply 500 V on existing panel board with necessary connections.
140 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 8.00 Nos. 535.30
0.5 Watt assembled on single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium
die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95,
THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/ watt,
LED driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
the ranges shown) (A) Tube Light with integral driver (v) 36-40 Watts, Surge-
2 KV, IP-20, conventional 4 feet, Cat-III [Make :- Phillips, Crompton,
Havells, Wipro, Jaquar, Osram]
141 Supplying and erecting led lamps with following wattage capacity of 220 to 2.00 Nos. 112.11
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5, (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder, (ii) 5 to 8 watts, Cat-III [Make :- Phillips, Crompton,
Havells, Wipro, Jaquar, Osram]
142 Supplying and erecting LED street light / Flood light fittings with High power 28.00 Nos. 4248.06
White LEDs wattage of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with toughened
glass with company mark/name engraved or embossed 160 to 270 V,
Power Factor more than 0.95, THD < 10%, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED
driver efficiency > 85%. (fittings required LM-79 & LM-80 certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
ranges shown) (A) Street Light (IP-65), Surge protection -4KV integral and
light must have 440VAC line supply with over-voltage protection. (ii) 48 -
Watts, Cat-III [Make:- Phillips, Crompton, Havells, Wipro, Jaquar, Osram]
(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 2.00 Nos. 4096.56
and spun aluminum canopy fixed with opal polycarbonate, pipe
arrangement for vertical mounting driver and accessories wired upto
terminal block. IP 65 (a) 40W, Cat-III [Make:- Phillips, Crompton, Havells,
Wipro, Jaquar, Osram]
(B) Flood Light (IP-65), Surge protection -4KV integral and Light must have 17.00 Nos. 8201.20
440VAC line supply with over-voltage protection. (vi) 160 - 199 watts, Cat-III
[Make:- Phillips, Crompton, Havells, Wipro, Jaquar, Osram]
143 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed 6.00 Mtr. 295.93
copper conductor with heat resistant PVC insulated conforms to IS 694, IEC
- 227 erected in existing pipe of following size (Specifically for control
panel, relays, power switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required. (h) One wire
(e) One wire 6.00 sq.mm 20.00 Mtr. 70.70
It. Rates in Total
Description of Item Qty. Unit
No. Figure Amount
144 Supply of Fibreglass Platform Step (A Type) Ladder - 15 FT having 1.00 Nos. 31636.23
following specifications : It should have large fully serrated platform 15” wide
20” deep which locks ladder, Aluminium feet with thick rubber tread, top rail
guard to serve as a railing, two pairs of gusset support at the bottom step
and all gussets are heavy duty steel. Capacity : 300 lbs
145 Providing & erecting approved make street light / wall mounting junction box 17.00 Nos. 356.53
compression moulded from SMC (thermoset plastic) vertical sliding cover
having locking with square head stud loop in / loop out in built terminal
suitable for four core cable, waterproof of I.P. 54 protected with clamp or
bolt nut & earth bolt of following size. (A) 200mm x 127mm x 83 mm [Make:-
National, Sintex, Esco]
146 Supplying & erecting approved make SMC press moulded composite FRP 13.00 Nos. 524.19
loop-in, loop-out approx. 2mm thick box complete with bakelite connector
strip 4 way & hinged doors having locking arrangements with mounting
clamp with nuts, bolts & washers suitable for erection on pole with cable
clamps & earth bolt of following size of box. (E) 200mm x 140mm x 125mm
[deep] [Make:- National, Sintex, Esco]
Total Rs.
i.e. Rs. Three Crore Four lacs Ninety Seven thousand One hundred Sixty One and Thirty Three paisa only.
I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there
is a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
6. Credit for dismantalled materials of amount of Rs. 3,73,078.81 must be recovered from 1st R.A. bill of
Contractor's.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Limkheda (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,
Limkheda Dahod Dahod
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
E- tendering Notice - Anaj Godown Bldg at Dbaria.pdf
SBD Book - Anaj Godown Bldg 1000 MT at Dbaria.pdf
BOQ.pdf
Specification Index.pdf
Technical Specifications.pdf
Electrical - Anaj Godown Bldg 1000 MT Dbaria.pdf
Drawings.PDF
GRs.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .