CC DRAIN

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Dismantling of existing brick masonary wall & R.R. masonary wall including all labour charges etc., complete.

Carting away the surplus excavated earth from the work site with a lead of 3.00 KM beyond initial lead including loading, unloading and conveyance but excluding stacking charges etc., complete.

Bailing out water from the trenches with oil engine driven pump sets, including hire charges, fuel charges and wages for Driver and Helper upto 5HP capacity pumps - 1 HP/Hr.

Removal of wet silt and sludge by manual means from sullage drains with aid of baskets and vessels.. as per SOR 2024-25

Dust Filling of foundation trenches as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture including cost and conveyance of all materials, labour charges, machine mixing charges, curing charges etc., complete as per S.S.

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm nominal size Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH

Providing concrete for plain/reinforced concrete (M15) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.(PCC Grade M 15 for key walls)

Supplying, Fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.

VRCC M-30 Nominal mix (Cement: fineaggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shutteing for culvert slabs

Manufacture, supply and delivery of H.D - 35 with 560 mm dia clear opening Man hole covers and frames with ISI making anywhere in A.P. Including cost and conveyance of all materials, labour charges etc., complete for finished item of work as per directions of the departmental authorities.

Collection and spreading of good gravel including cost and conveyance of all materials to worksite all labour charges and stacking to departmental guage etc., complete as per SS - for beams