Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.1 L
EMD Value
₹8,180
Closing Date
26 Nov 2026, 2:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Asstt Comdt Elect
Assistant Engineer (Elect) ,STC BSF CC Pur Manipur
Improvement / Up gradation of Annexe Officers institute at STC BSF CC Pur Manipur (SH Service Connection)
2026_BSF_934784_1
Engg(Elect)/ E-Tender /STC BSF CCPur/ 2026/ 22790
Open Tender
Electrical Works
Works
30 days
STC BSF CC Pur
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,180
Yes
18 Nov 2026
18 Nov 2026
27 Nov 2026
18 Nov 2026
26 Nov 2026
18 Nov 2026
18 Nov 2026 - 26 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Schedule | |||||
| 1.01 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. | 28 | Each | 8,300 | ₹2,32,400 |
| 1.02 | Supplying and erection of stay set complete galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. | 3 | Each | 5,759 | ₹17,277 |
| 1.03 | Erection of LV/ MV shackle/pin insulator etc. as required. | 17 | Each | 107 | ₹1,819 |
| 1.04 | Erection of ACSR conductor of 7/ 2.11 mm to 7/3.00 mm diameter including binding etc. as required. | 50 | Kg | 258 | ₹12,900 |
| 1.05 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. | 100 | Kg | 111 | ₹11,100 |
| 1.06 | Dismantling of pole/ street light standard/ strut mbedded in ement concrete foundation etc. as
required. | 5 | Each | 3,378 | ₹16,890 |
| 1.07 | Supplying and erection of 50 mm X 8 mm M.S. flat iron pole top bracket/ cross arm for single 1/22/33 KV over head line conductor complete with fixing clamps, bolts, nuts and washers drilling holes for insulator pins, bolts and nuts etc as required. | 16 | Each | 716 | ₹11,456 |
| 1.08 | Erection of bolted type suspension clamp assembly, as per the approved sample/design, comprising UV-resistant and weather-resistant polymer clamp body, hot-dip galvanised steel suspension eye/shackle, metallic pressure plate, high-tensile galvanised steel bolt, nut and washers, complete with all necessary fittings and accessories. The assembly shall be suitable for supporting the insulated messenger conductor of 1.1 kV LT Aerial Bunched Cable of specified cross-sectional area, without causing damage to its insulation, and shall possess adequate mechanical strength, grip and corrosion resistance for outdoor service. complete in all respects. | 43 | Each | 50 | ₹2,150 |
| 1.09 | Fixing of I-Hook Clamp Assembly suitable for 9.0 metre MS steel tubular pole for supporting LT Aerial Bunched Cable suspension clamp assembly, comprising suitably designed pole mounting clamp of split/saddle type fabricated from 50 mm × 6 mm MS flat, integral I-hook fabricated from 16 mm diameter MS round bar, hook base plate of 100 mm × 75 mm × 8 mm, suitable reinforcement/gusset plates of 6 mm thickness, and complete pole fastening arrangement with 2 Nos. galvanised steel bolts, nuts and washers. The pole mounting clamp shall be split type , specifically designed to suit the outside diameter and taper of the pole at the actual installation location. . The assembly shall possess adequate mechanical strength to withstand the calculated working and proof loads under specified service conditions, and shall be compatible with the approved LT ABC suspension clamp assembly. | 39 | Each | 120 | ₹4,680 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
TenderPaper.pdf
Tender Documents • 0.37 MB
BOQ_982308.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .