Infrastructure works for food court and pavilion and related facilities at Infopark Phase 1

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish out side Infopark campus

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth at Infopark Phase II including all lead and lift, disposed earth to be levelled and neatly dressed.All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains , including back filling, dressing of sides and ramming of bottom with all lead and lift and disposing of surplus excavated earth for all kinds of soil within infopark phase 2 campus.

Filling available excavated earth(excluding rock) in trenches, under floors, in areas etc. in layers not exceeding 20cm in depth,consoldating each deposited layer by ramming and watering with all lead and lift including cost and conveyance of all materials, labour charges, etc complete at all levels as directed by the Engineer-in-Charge

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).M-sand may be used for the work.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).M-sand may be used for the work.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Providing and laying cement concrete for string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. at all level and above, including the cost of centering, shuttering and finishing: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).M-sand may be used for the work.

Diluting and injecting chemical emulsion for POST -CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum minimum, using M-sand and 20mm nominal size graded stone aggregate). All works upto plinth level including retaining wall.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum minimum, using M-sand and 20mm nominal size graded stone aggregate). All work above plinth level for superstructure for all heights-Column

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum minimum, using M-sand and 20mm nominal size graded stone aggregate). All work above plinth level for superstructure for all heights- Beam

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum minimum, using M-sand and 20mm nominal size graded stone aggregate). All work above plinth level for superstructure for all heights- Slab

Centering and shuttering including strutting, etc. and removal of form for:foundations, footing, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, etc. and removal of form for:Lintel, plinth beams, girders bressumers and cantilevers

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and fixing T.M.T. FE 500D or above Bars Reinforcement of all diameters as per drawing (Conforming to IS:1786) for all R.C.C. works at all levels including foundations, columns, beams, slabs, pardies, parapets, etc. which includes bends, hooks, laps, cover blocks of any form or design as per drawing and IS specifications . This includes transporting, de-coiling, straightening, cutting, bending, cranking, welding and placing in position at all levels and binding with approved quality G.I. annealed binding wire, cover blocks or approved concrete cover blocks of same grade as of concrete. This shall also includes binding wire, chairs, spacers, pins etc. Further includes where required carryout dewatering, provide required labour and machines / equipments / tools / tackles for handling, shifting, bending, binding, etc. all complete to the satisfaction of the Structural Consultant/Architect-PMC at all depths & leads. NO extra payment/measurement shall be given for dewatering, cover blocks, binding wires, unauthorised overlapping, chair and wastage etc.

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

Providing and constructing Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)including raking out of joints, filling the joints /hollows with suitable sizes of split stones, filling the joints clearly, curing, cost and conveyance of all materials, cost of bond stone (should be provided at every 0.5 sqm of face area) , lead, lift etc. complete as directed by Engineer-in-Charge at all levels.M-sand may be used for the work.

Providing and applying 6 mm cement plaster(average thickness) of mix: 1:3 ( 1 cement : 3 fine sand) to ceiling of mix including cost and conveyance of all materials, labour charges,including hacking of concrete surface, scraping, watering, finishing, curing, scaffolding, finish the surface smooth in line and level to the entire satisfaction of Architect-PMC complete. etc complete as directed by the Engineer-in-Charge at all levels. (Using P-Sand)

Providing and applying 12 mm cement plaster(average thickness) of mix:1:6 ( 1 cement : 6 fine sand)including cost and conveyance of all materials, labour charges, scaffolding, Finish the surface smooth in line and level to the entire satisfaction of Architect-PMC complete. This is for all heights, depths, levels, leads and lifts and to include providing and fixing fiber wire mesh in junction RCC and brick walls, sundries etc complete as directed by the Engineer-in-Charge at all levels.(Using P-Sand)

Applying one coat of water thinnable cement primer of approved brand and manufacture on all surface including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer-in-Charge at all levels.

Painting the inside walls with acrylic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work to smooth even finish on ceiling and walls including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, etc as directed by Engineer-in-Charge at all levels

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm after scraping and cleaning the surface including cost and conveyance of all materials, primer, labour charges, scaffolding, etc. complete as per manufacturer's specifications and as directed by Engineer-in-charge at all levels.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Regular ABS Door - for all toilets block doors Frame- Foamed PVC Frame of 110mmx40mm.The Frame would be fixed to masonry wall using Anchor fastners The gap between wall and frame to be filled with Silicone. Shutter- 35 mm thick shutter fabricated with front and back panels consisting of imported korean made ABS SHEET of thickness 1.5mm fused with deco film of thickness 0.2mm .The shutter frame is made with solid PURPLE PVC BAR of section size 32/35mm and thermally bonded with high temperature on all four corners.Addition to this Single LAMINATED VEENEER LUMBER(LVL) is given vertically on both sides for additional stability The internal portion is filled with cell size 10mm-12mm high resistance crafted Honeycomb board and pressed with high pressure ABS SHEETS on both sides. Architraves - 58x15mm/6x12mm respectively on external and internal sides respectively rates include all installation, transport, hardware, lead and lifts. Make- Kassa/NCL Doors/ AKR Door Solutions. Size- 70cm x 210 cm

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing PVC rain water gutter of 150mm dia of approved quality. The rate shall includes ,cost and conveyance of materials,Handling of machineries and electrical charges etc. labour charges,lead,lift etc. complete as directed by Engineer in Charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite of any colour and shade. Basic rate of (Rs 2400 to 2600)/m2 is considered.

Extra for providing edge moulding to 16 to 20mm thick marble/granite counters, Vanities etc. including machine polishing to edge to give high gloss finish,triple step groove etc. complete as per design and as approved by Engineer-in-Charge at all levels.:Granite work

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite work including providing necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete as directed by the Engineer-in-Charge at all levels.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within infopark phase 1 campus.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including providing of 50 mm thick compacted bed of coarse sand as per requirement. Filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Using Old CC paver blocks available at site)

Providing and fixing PVC tile edging to match the wall tiles and finishing as directed by the Engineer-in-Charge at all levels.

Providing and laying antiskid vitrified floor tiles of size upto 1.5 sqm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),.including epoxy joint filling( 3mm spacers to be provided)

Providing and laying Vitrified tiles of size upto 1.5 sqm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including epoxy joint filling( 3mm spacers to be provided)

Microtopping- 3mm thick Cement-based decorative coating for floors two-component polymeric cementitious system suitable for continuous decorative leveling characterised by a refined aesthetic design. Based on the type and condition of the substrate (concrete, sand-cement, ceramic, selfleveling…), this must be prepared by sanding, shot blasting etc. and also be clean, rough, free from contamination, intact and perfectly level. Base Coat - Coarse-aggregate for the structural base. High Performance - Intermediate aggregate, for a textured and resistant finish Finish Coat - Fine-aggregate for a smooth finish. Rate shall be inclusive ofall materials, labour, transport, lift lead exclusive of tax

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

Providing and applying melamine polish on wood work after scraping and cleaning the surface applying necessary coats of putty, filler and sealer, etc. Sanding shall be done along the grains using water paper/emery paper before applying filler, sealer and melamine to get a perfectly smooth and uniform finish. Melamine and sealer shall be applied using spray gun. The rate shall include cost and conveyance of all materials, lead lift, all labour

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including cost and conveyance of all materials, labour charges, scaffolding, sundries etc complete as directed by the Engineer in charge at all levels.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying 2 coat of epoxy primer and 2 or more coat of epoxy paint in 2 pack system, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes

Providing and fixing Truss Roof with puff panel sheets- Rafters of 96 mm x 48 mm 3.2 mm thick, 30mm puff sheet with top side aluminum of Oralium make to be provided.. All works to be done as per the instructions of the engineer-in-charge. Including cost and conveyance of all materials, labour, lead,scaffolding, lift etc as directed by Engineer in-charge.

Exterior Grade Wooden finish composite ceiling - Infratop false ceiling manufactured in europe, of panel sizes of 340mmx 2700mm, durable and resistant to moisture, water and borer-fungus-termite attack. Panels to be installed with GI sections of suitable gauge & size according to site conditions. Panels SV 08/07 &09 with suitable trims SV 15 J TRIM with dimensions 40x19x22x12x3050 (all in mm) for edge profiles and SV 18 T TRIM with dimensions 67x3050 mm with T head of 42mm for Connecting profiles. Panels must be maintainance free, rust proof and are 100% Water proof. Advised especially for Soffit areas, under the roof installation.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing hand rail of approved size in tubular section by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying of 2 coat epoxy primer 2 or more coats epoxy paint to achieve an even shade (2 coat system) of approved make .

Dining table 4 seater- Supply and arranging of furniture. With anticorrosive powder coated metal base and top to be done with high pressure laminate. The table top should be water resistant, stain resistant, fire retardant HPL or similar material.Basic rate of 7800-8000 Rs . Dimensions- 90cm dia

Outdoor purpose cafeteria Chairs.- Supply and arranging of furniture. Size approx. - H 30 x W 23.2 x D 23.2 having a Base rate 5500 to 5700 Rs. Outdoor purpose chairs with metal and wicker or materials as per the architect's requirement.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in infopark phase 2 campus as per direction of Engineer -in-Charge.

Demolishing solid block masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within infopark phase 2 campus as per direction of Engineer-in-Charge.In cement mortar

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

Supply of healthy and well grown EUGEENIA YELLOW- 3 to 4 ft height

Supply of healthy and well grown EUGEENIA LIVER RED- 3 to 4 ft height

Supply of healthy and well grown FICUS PANDA-1 to2 ft height

Supply of healthy and well grown CALATHEA LUTEA- 2 to 4 ft height

Supply of healthy and well grown BOUGAINVILLA miniature, shaped model min 5 yrs old - 3 ft height

Supply of healthy and well grown ALOCASIA- 1 to 2 ft height

Supply of healthy and well grown NICCARDIA- 1 to 2 ft height

Supply of healthy and well grown RAPHIS PALM MINIATURE- 4 to 6 inches height

Supply of healthy and well grown RAPHIS PALM- 1 to 2 ft height

Supply of healthy and well grown PANDANUS THAI- 2 to 4 inches height

Supply of healthy and well grown COSTUS MUTT- 1 to 2 ft height

Supply of healthy and well grown TORCH GINGER- 2 to 4 ft height

Supply of healthy and well grown MELASTROMA- 1 to 2 ft height

Supply of healthy and well grown TERMINALIYA WHITE-7 to 10 ft height

Supply of healthy and well grown TERMINALIYA GREEN- 7 to 10 ft height

Supply of healthy and well grown CRINUM LILLY BROWN- 2 ft- 3ft

Supply of healthy and well grown DRACENA DRACO SMALL- 1ft height

Supply of healthy and well grown GOLDEN DRACEANA- 1 to 2 ft height

Supply of healthy and well grown DRACENA TRIANGLE- 2 to 3 ft height

Supply of healthy and well grown MANIMARUTH 9-10 ft height

Supply of healthy and well grown TECOMA 7-8 ft

Supply of healthy and well grown ASHOKAM- 7 to 10 ft height

Supply of healthy and well grown BRASSIA- 7 to 10 ft height

Supply of healthy and well grown FOUNTAIN GRASS BROWN- 1ft height

Supply of healthy and well grown PLUMERIA DWARF- 3 to 5 ft height

Supply of healthy and well grown ZEBRA LEAF-4 to 6 inch height

Supply of healthy and well grown RHEO- 2 to 4 inch height

Supply of healthy and well grown HELICONIA RED- 1 to 2 ft height

Supply of healthy and well grown HELICONIA YELLOW- 1 to 3 ft height

Supply of healthy and well grown MURRAYA- 1 to 3 ft height

Supply of healthy and well grown LOROPETALAM- 2 to 3 ft height

Supply of healthy and well grown PAINTING BAMBOO- 3 to 5 ft height

Supply of healthy and well grown GOLDEN BAMBOO- 3 to 5 ft height

Supply of healthy and well grown BLACK BAMBOO- 3 to 5 ft height

Supply of healthy and well grown KENTIYA PALM- 5 to 7 ft height

Supply of healthy and well grown SPIDER LILLY- 1 ft height

Supply of healthy and well grown PANDANUS ORDINARY - 4 to 6 inch height

Supply of healthy and well grown RIBBON GRASS GREEN -1 ft height

Supply of healthy and well grown FERN- 4- 6 inch height

Supply of healthy and well grown PLUMERIA ALBHA - 5 to 8 ft height

Supply of healthy and well grown PLUMERIA RUBRA- 5 to 8 ft height

Supply of healthy and well grown PLUMERIA YELLOW- 5 to 8 ft height

Supply of healthy and well grown BLUEVARIA- 1 to 2 ft height

Supply of healthy and well grown LIMONIA GREEN- 1 to 2 ft height

Supply of healthy and well grown LIMONIA YELLOW- 1 to 2 ft height

Supply of healthy and well grown ARELIA FINGER- 1 to 2 ft height

Supply of healthy and well grown ACALYPHA RED- 1 to 2 ft height

Supply of healthy and well grown SUNDAY MONDAY- 2-3 ft height

Supply of healthy and well grown UMBERLLA GRASS- 1-3 ft height

Supply of GRC/GFRC Pot- Height- 14" and Width - 14" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 15" and Width - 17" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 16" and Width - 18" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 22" and Width - 20" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 26" and Width - 26" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 12.5" and Width - 30" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 24" and Width - 20" , color- HM shell white.

Supply of GRC/GFRC Pot- Height- 33" and Width - 18" , color- HM shell white.

Red Soil- Supplying and spreading good quality red earth without any debris for landscaping, Levelling and formation mountains.Quality samples shall be checked and verified by the engineer in charge.

Pearl Grass-Supplying and turfing of Pearl Grass(green) over 50 mm thick layer of soil and manure mix, consisting of 1 part of top soil red earth and organic manure ,rolling and grading for proper drainage.Plant material shall be well formed and shaped true to type and free from disease, insect and defect such as knots, windburn, sun-cold, injuries, abrasion or disfigurement. . After earth work and land levelling, cocopeat and manuring will be done and proper anti termite treatment should be done before again spraying pesticides and lawn laying.

Supply and Installation of cobble Stone of size 10 cm x 10cm x avg thickness 5 cm- 10 cm in required pattern as per design.Stones to be fixed on aggregates by preparing and levelling the walkway using vibrator machine or any means necessary. All materials, including base materials like stone aggregates and cement to be included along with all leads, labour, lift, to be included. Stone shall be having mixed thickness. After levelling, of coarse aggregate having a thickness around 50mm and stones to be laid in cement and M-sand mix ( 1:4 ) filled in between the stones including grouting

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 90 cm dia, and 90 cm deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 45 cm dia, and 45 cm deep

Fine dressing of the ground

Providing, Fixing, Testing and Commissioning at site approved brand and model Wall Mounting type water closet with P trap & its all fittings like rag bolts, matching Soft Closing Slim Seat Cover with lid C.P brass hinges and rubber buffers ,matching Concealed Vetrious China Cistern with Fittings, brass screws, nuts , and washers complete including cutting and making good the walls and floors and including all the necessary accessories as required complete. Basic price:- water closet - Rs 11000/- to 13000/-, Consealed Vetrious China Cistern with Fittings - Rs 6500/- to 8000/-,White Plastic sheet (solid) with lid C.P brass hinges and rubber buffers - Rs 6500/- to 8000/-

Providing, Fixing, Testing and Commissioning at site Handicapped Wall mounting water closet with P trap & it’s all fittings like rag bolts, matching Soft Closing Slim Seat Cover with lid C.P brass hinges and rubber buffers ,matching Concealed Vetrious China Cistern with Fittings,brass screws, nuts, and washers. Flat back Wash Basin with half pedestal with accessories, 32 mm C.P. brass waste coupling, rag bolts. With 1 health faucet, 2 Angle valves, 1 Pillar tap,1 Bottle trap, 2 Grab bars ,1 Hand rail & complete including cutting and making good the walls and floors and including all the necessary accessories as required complete. All items should be in the approved make list.Basic price:- water closet - Rs 11000/- to 13000/-, Consealed Vetrious China Cistern with Fittings - Rs 6500/- to 8000/-,White Plastic sheet (solid) with lid C.P brass hinges and rubber buffers - Rs 6500/- to 8000/-,Flat back washbasin with half pedestal -Rs 5500/- to 6300/-,32mm CP brass waste coupling - Rs 650/- to 800/-, Health Faucet - Rs 2300/- to 2700/-,Angle Valves - Rs 2100/- to 2500/-, Pillar tap - Rs 2600/- to 3000/-, Bottle trap - Rs 850/- to 1000/-, Grab bars - Rs 2500/- to 2900/-,Hand rail - Rs 5700/- to 6600/-.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge. Basic price:- Urinal (Rs 35000/- to 40000/-)

Providing and fixing white vitreous china wash basin under counter (round / oval), with C.I. concealed type brackets fixed to walls with GI rag bolts or approved fasteners etc., including matching 32 mm CP brass waste coupling, including painting of fittings and brackets, cutting and making good the walls wherever required all complete (Granite counter top will be measured and paid separately under relevent item): as per approved make and decision of engineer-in-charge.Basic Price:- Wash basin Under Counter with all accessories required for installation - Rs 6500/- to 7500/-, 32mm CP brass waste coupling PUSH OPEN - Rs 3000/- to 3500/-.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931. (Make:- Schell 05 431 06 99 or equivalent approved make)Basic Price:- Cost of Angle valves - Rs 2100/- to 2500/-

Supplying and fixing CP Health Faucet superior quality including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. Basic price : - cost of health faucet - Rs 1300/- to 1600/-

Providing and fixing 700x700 mm round beveled edge mirror of superior glass (of approved quality) complete with proper clamping and necessory fittings.Basic price :- Rs 5000/- to 5500/-

Providing and fixing toilet paper holder.

Providing, Fixing, testing and commissioning Pillar tap for wash basins and including all the necessary accessories as required complete. (Premium) Basic Price:- Cost of Pillar tap - Rs 3700/- to 4350/-

Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge. (Make:- Geberit 151.113.11.1 or equivalent approved make) Basic price:- Bottle Trap - Rs 750/- to 900/-

Supplying and fixing of Robe hook with holder all complete as directed by engineer-in-charge. Basic Rate :- Robe Hook - Rs 800/- to 950/-

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge. 110 mm dia 6Kgf/cm2

Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2

Providing, Fixing, testing and commissioning at site in position UPvc fabricated Multi floor trap (4”), with 50/75 mm dia outlet.Basic price:- Multi floor trap (4”) - Rs 260/- to 300/-

Providing,Fixing, testing and commissioning at site 150x150 mm square C.P. cast brass or stainless steel anti cockroach grating cover SS (304) of matching size of UPvc fabricated floor trap / multi inlet trap complete in all respects. Basic Price:- Grating Cover - Rs350/- to 400/-

Providing, Fixing, testing and commissioning at site in position Concealed floor trap (4” UPvc fabricated Multi Trap, with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw. etc. complete in all respects. 50/75 mm dia outlet.Basic Price :- Grating Cover - Rs350/- to 400/-, Multi floor trap (4”) - Rs 260/- to 300/-

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 20 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 32 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 40 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ) for cold water supply, including all (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc). Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step ASTM solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25 mm nominal outer dia pipes.

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ) for cold water supply, including all (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc). Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step ASTM solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 32 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ) for cold water supply, including all (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc). Including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step ASTM solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 40 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ), having thermal stability for cold water supply including all (ASTM D – 2466/2467) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step ASTM solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 20 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ), having thermal stability for cold water supply including all (ASTM D – 2466/2467) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step ASTM solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 25 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ), having thermal stability for cold water supply including all (ASTM D – 2466/2467) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step ASTM solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 32 mm nominal outer dia pipes

Providing and fixing uPVC Pipes (as per ASTM D – 1785 sch-40 ), having thermal stability for cold water supply including all (ASTM D – 2466/2467) plain & brass threaded fittings. This includes jointing of pipes & fittings with one step ASTM solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 40 mm nominal outer dia pipes

Providing, Fixing at site in position full way lever operated forged brass ball valve of brass body with forged brass hard chrome plate (PN 25) of approved make with necessary MTA fittings in position as per drawings. 20mm dia. Basic Price:- ball valve 20 mm dia- Rs 600/- to 750/-

Providing, Fixing at site in position full way lever operated forged brass ball valve of brass body with forged brass hard chrome plate (PN 25) of approved make with necessary MTA fittings in position as per drawings. 25mm dia Basic Price:- ball valve 25 mm dia- Rs 900/- to 1050/-

Providing, Fixing at site in position full way lever operated forged brass ball valve of brass body with forged brass hard chrome plate (PN 25) of approved make with necessary MTA fittings in position as per drawings. 32mm dia Basic Price:- ball valve 32 mm dia- Rs 1500/- to 1700/-

Providing, Fixing at site in position full way lever operated forged brass ball valve of brass body with forged brass hard chrome plate (PN 25) of approved make with necessary MTA fittings in position as per drawings. 40mm dia Basic Price:- ball valve 40 mm dia- Rs 2100/- to 2400/-

Providing, Fixing, testing and commissioning at site in positions Automatic Air Release Valves, of approved quality and make on the top of the vertical water supply pipes as per specification and drawing. 20mm dia Basic Price:- ARV 20 mm dia - Rs 650/- to 800/-

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholesSize 90x80 cm.With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Supply ,Installation , testing and commissioning of 12 cum/hr at 18 mtr head SUBMERSIBLE DEWTERING non clogg pumps for 1-Duty & 1 Standby operation, Electronic Control Panel consisting of Main contractor, cyclic change over relay, Single phase preventer, Phase reversal protection, TRIP/ON/OFF display enclosed in a metallic enclosure mounted on each pump all assembled on a common base with one number of float switch as per specification and including all the necessary accessories as required complete and directed by Engineer - in- charge. (3HP or more) Basic Price:- Cost of pump and motor (WILO) - Rs 260000/- to 295000/-

Supply ,installation ,testing and commissioning of SUBMERSIBLE TWIN BOOSTER PUMPS for 1-Duty & 1 Asst operation, 4300 lph @ 3 bar each, fixed speed type to maintain the pressure and located at sump tank including 100L pressure vessel, ball valves on discharge, NRV on discharge, Pressure gauge & pressure switches on discharge, , Electronic Control Panel consisting of Main contractor, cyclic change over relay, TRIP/ON/OFF display enclosed in a metallic enclosure mounted on each pump all assembled on a common base with one number of float switch as per specification and including all the necessary accessories as required complete and directed by Engineer - in- charge. (1HP or more) Basic Price:- Cost of pump and motor (WILO) - Rs 140600/- to 162800/-

Constructing Grease Trap of size as mentioned below of 1200 liquid depth in brick work of class 75 with cement mortar (1:6), inside plastering 16 mm thick with cement mortar 1:3 with floating coat of neat cement and rough plaster on outside. Including aluminium bucket as per detail to collect the grease. RCC top slab with 2 nos. 600 x 600 mm dia medium duty hinged type cover with epoxy coating, double seal manhole covers with frame (weight of covers & weight of frame 75 Kg), necessary 150 mm thick foundation concrete (1:2:4). 2000mm x 1500mm as per detailed drawings and specifications.

Providing,Fixing of 20m3 Screen Filter (Cast Iron) with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc)

Providing,Fixing of Impact Sprinkler with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc)

Providing,Fixing of Pop-up Sprinkler with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc)

Providing,Fixing of 16 mm Poly Tube with all necessary fittings etc.

Providing,Fixing of 6 mm Poly Tube with all necessary fittings etc.

Providing,Fixing of Micro Tap/Dripper with all necessary fittings etc.

SITC of 1 ½ "Solenoid Control Valve with all necessary fittings etc.

SITC of 10" Round Valve Box with all necessary fittings etc.

Providing,Fixing,testing and commissioning at site SPP , Expandable, 230 volt, 6 station with all necessary need for automatic the irrigation system, relay and other accessories of approved make with necessary MTA fittings in position with all necessary fittings etc. Consider all civil works, plumbing works electrical works all related to the irrigation system. The accessories for the successfull running of the irrigation system. No extra Cost for any additional items. (RainBird/Equivalent)Plumbing Irrigation - Sprinkler system using automation- Installation of drip lines, including connection to main/lateral pipelines and all necesssary fixings and fittings, etc, complete all in accordance with drawings and specifications.

ODP Supply, installation, testing and commissioning of cubicle type totally enclosed Floor, dust free, damp and vermin proof, powder coated ,Form 4 b and water proof, double door with canopy outdoor (IP 65) (IK 10) LT Panel including supply & fixing the following items and interconnections, wiring with suitable size wires/cables and including all works for foundation like excavation, PCC, brick work , plastering, finishing etc. and as per specifications as required. Refer technical specification and drawing for details. Incomer 40A, FP MCB. Busbars 100 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy - 1 Set. Instruments 4A, C curve SP MCB - 3 Nos. RYB indication lamp, LED type - 1 Set SPD ( Surge Protection Device as Per IS/IEC 62305 Part4) The panel should include pluggable type surge arrester in suitable enclosure Class B+C/ Class 1+2 as per IEC 61643 (IP 20) with potential free contact, thermal dis connector & provision for inbuilt common remote indication for defective arresters to connect between Line and Neutral and one number arrester Spark Gap type to connect between Neutral and Earth of following ratings including base element & pluggable arresters. Nominal voltage -230V 50Hz, type single MOV with built in thermal fuse and cooling gel(L to N) & spark gap encapsulated / non exhausting (N to E) . Lightning Impulse Current - 21 kA (10/350µ sec) for Line to Neutral & 25 kA(10/350µ sec) for Neutral to Earth,Nominal discharge current-30 kA (8/20µ sec) for Line to Neutral & 40 kA(8/20µ sec) for Neutral to Earth, max discharge current 150 kA (8/20µ sec) for Line to Neutral & 50 kA(8/20µ sec) for Neutral to Earth. Voltage protection level 1300V (L to N) & 1200V (N to E). Operating temp -40º to +80ºC. Response time <25 nano sec (L to N), < 100 nano sec (N to E) DIN rail mounting type etc complete with back up fuse as required and as directed. Outgoings 25A DP RCBO 100mA with with digital timer and contactor-5nos 16A DP RCBO 100mA with with digital timer and contactor-3nos 32A TPN MCB-2Nos.

Supply, Installation, Testing & Commissioning of 125A COS, cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42 form 4b, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc., including following components as per drawing and technical specifications. (Ref Drawing and technical specification for more details) and direction of Engineer In Charge.

Supply , Installation, Testing and Commissioning of 3 kVA UPS system, single phase input, single Phase output, true on-line UPS system with 30 minutes back up , output isolation transformer, including all accessories, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as cabling etc as required complete having following specification.The UPS system consist of One number of UPS units and One set of battery bank . Refer technical specification and drawing for details. Fully digital controlled based on DSP, Power factor corrected from end > 0.9 Pure sine wave output, Full time output voltage & frequency regulation, Auto regulation of battery end voltage, Intelligent interface with LED/LCD display, Auto temperature compensation, Remote Management Interphase, Back up time 30 minutes at full load

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 185 Sq. mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 120 Sq. mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 50 Sq. mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3.5C 35 Sq.mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 16 Sq.mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 10 Sq.mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 6 Sq.mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminiumr conductor cable conforming to IS 7098 (Part 1) amended upto date. 4C 4 Sq.mm Al

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 4 sqmm Cu armoured

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 1.5 sqmm Cu unarmoured

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 3.5C 185 Sq. mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 3.5C 120 Sq. mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 3.5C 50 Sq. mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminiumr conductor cable of 1.1 kV grade as required. 3.5C 35 Sq.mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 4C 16 Sq.mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 4C 10 Sq.mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 4C 6 Sq.mm Al

Supplying and making end termination with brass compression gland and aluminium lugs for following size of XLPE insulated PVC sheathed aluminium conductor cable of 1.1 kV grade as required. 4C 4 Sq.mm Al

Supplying and making end termination with brass compression gland and Copper lugs for following size of XLPE insulated PVC sheathed copper conductor cable of 1.1 kV grade as required. 3C 4 sqmm Cu armoured

Supplying and making end termination with brass compression gland and Copper lugs for following size of XLPE insulated PVC sheathed copper conductor cable of 1.1 kV grade as required. 3C 1.5 sqmm Cu unarmoured

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall / surface as required. Cable size upto 35sq mm

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall / surface as required. Above 35 sq.mm upto 95 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall / surface as required.Above 95 sq.mm upto 185 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required. Cable size upto 35sq mm (clamped with 1mm thick saddle)

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 35 sq.mm upto 95 sq.mm (clamped with 25x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required. Above 95 sq.mm upto 185 sq.mm (clamped with 25/40x3mm MS flat clamp)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Cable size upto 35sq mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq.mm upto 95 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 95 sq.mm upto 185 sq.mm

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Cable size upto 35sq mm

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq.mm upto 95 sq.mm

Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 95 sq.mm upto 185 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 95 sq.mm upto 185 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 95 sq.mm upto 185 sq.mm

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK

Fabrication, supply and installation of following size of Ladder type GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required. 600 MM WIDTH X 50 MM DEPTH X 2 MM THICK

Fabrication, supply and installation of following size of Ladder type GI hot dip galvanised cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and painting etc as required. 300 MM WIDTH X 50 MM DEPTH X 2 MM THICK

Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required. 100 mm

Providing & fixing Fire Barrier mortar with minimum 2 hours fire rating when tested in accordance with BS 476 part 20 and UL 1479 for horizontal openings in fire rated floors or slabs and vertical openings in walls for passing service shafts. The service lines could be of various types like electrical cables trays, metal pipes, GI Ducts for AC, etc.The mortar shall have minimum hardened density of 0.8 g/cm3 and It should have a compressive strength of 2.9N/Sq mm . The product shall be Smoke & Air Seal and 30 years Age tested as per Dafstb and DIBT standards. The product shall be tested and approved by third party agencies such as UL and FM. The mortar should be tested in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall bear the UL and FM approval logo on the packing where applicable.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. (Note: The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item 228)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. ( Note: The total distance from one point to another point will not exceed 5meters. In case if the total length increases 5meters, the additional lengtth shall be measured under item 228. The distance from DB to 1st point will be measured under item point wiring.

Group controlled light point with 1.5 sq. mm wire - Wiring for Group controlled light point (from one point to another point) with 3X 1.5 sq. mm PVC insulated, (FRLS), copper conductor cable in surface/recessed mounted rigid medium class 20mm PVC conduit with all accessories as required. ( Note: This item does not include the cost of MCB or 16Amp/ 6Amp one way switches. The total distance from one point to another point will not exceed 5meters. In case if the total length increases 5meters, the additional lengtth shall be measured under item 50. The distance from DB to 1st point will be measured under item point wiring.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply & fixing Computer points with 3 nos 3 pin 5/6A socket with 2no.5/6A switch with modular front plate and cover on surface/recess, including proving and fixing suitable size GI boxs, its interconnections etc as required complete. (Note: 2 nos 5/6A socket fixed at 60cm above FFL and 2 nos 6A switch with 1no 5/6A socket at 1m above FFL)

Supplying and fixing stepped type electronic fan regulator with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supply of 6 core indoor SM fiber with accessories laying through conduits as required at site to complete the work as per specification

Supply of U/UTP cable - Category 6A 4 pair, 23 AWG solid copper conductor, 500 MHz, through conduits including termination, numbering tags, Cable ties, ferrules and all accessories required at site to complete the work as per specification

Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB ’ s, with provision of FP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4+12)

Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB ’ s, with provision of FP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (8+24)

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100Amp,25KA,FP,MCCB

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 63Amp,25KA,FP,MCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (6 + 18), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing following way, SPN, sheet steel, MCB distribution board, 230 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 Way, Double door

Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 4 pole 63 amps. (415 Volts), 30mA sensitivity.

Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 4 pole 63 amps. (415 Volts), 100mA sensitivity.

Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 4 pole 40 amps. (415 Volts), 30mA sensitivity.

Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 4 pole 32amps. (415 Volts), 30mA sensitivity.

Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required. 2 pole 25 amps. (230 Volts),30mA sensitivity.

Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. 6A to 32A, SP, B/C-CURVE

Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. 40 A to 63A TP MCB, C-CURVE

Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required. 32A TP MCB C CURVE

Supply, Installation, Testing & Commissioning of ACCL (Automatic Changeover and Current Limiter) is DIN-Rail mounted in Polycarbonate housing. Operating range 190V- 270V,50Hz single phase power supply, Conforming to IEC 60947-6, IEC 60947-3. Extremely energy efficient by consuming negligible power without heating. Minimum time delay setting for mains transfer as added safety.ACCL SPN upto 20A

Supply, Installation, Testing & Commissioning of 32A DP isolator in 1.6mm thick sheet steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring etc as required complete.

Supply of Following rating isolators mounted on suitable thermoplastic type box of IP 65 Protection. The enclosure shall be mounted suitably on wall /plate /pedestal mounting. 16A DP

Supply of Following rating isolators mounted on suitable thermoplastic type box of IP 65 Protection. The enclosure shall be mounted suitably on wall /plate /pedestal mounting. 40A FP

Supply of Following rating isolators mounted on suitable thermoplastic type box of IP 65 Protection. The enclosure shall be mounted suitably on wall /plate /pedestal mounting. 63A FP

Supply of LED recess mounted down light (COB) made of die cast aluminium, along with driver,system wattage of 7+/-2 Watts, lumen output of lamp greater than 400 lumens, power factor >= 0.9,rated life of L70 @ 20,000 hours, ,Neutral light and including all necessary accessories as required complete. (Brand and Model:- Philips Low Glare IP44 COB or equivalent approved make mentioned in tender documents)

Supply of LED surface mounted down light made of die cast aluminium, along with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 700 lumens, power factor >= 0.9,rated life of L70 @ 20,000 hours, Neutral light and including all necessary accessories as required complete. (Brand and Model:- Philips Deco COB or equivalent approved make mentioned in tender documents)

Supply of LED recess mounted down light (COB) made of die cast aluminium, along with driver,system wattage of 20+/-2 Watts, lumen output of lamp greater than 2050 lumens, power factor >= 0.9,rated life of L70 @50,000 hours,neautral light and including all necessary accessories as required complete. (Brand and Model:- Philips Lux Space Pro DN590B M LED20 PSU or equivalent approved make mentioned in tender documents)

Supply of LED recess mounted down light made of die cast aluminium, along with driver,system wattage of 7+/-2 Watts,lumen output of lamp greater than 900 lumens, power factor >= 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90 lumen/watt ,cool daylight and including all necessary accessories as required complete. (Brand and Model:- Philips DN295B LED 9S-6500 PSE WH S1 or equivalent approved make mentioned in tender documents)

Supply of industrial surface mounted LED luminaire with Extruded Aluminium Alloy housing and Poly Carbonate Diffuser, along with driver , surge protector, system wattage of 30+/-5 Watts, lumen output of lamp greater than 3600 lumen, power factor >= 0.9, system efficacy greater than 120 lumen/watt, cool day light and including all necessary accessories as required complete. (Brand and Model:- Cat No: TCW450 P 2XTLED 19W P3397 Philips or equivalent approved make mentioned in tender documents)

Supply of LED Strip light along with driver with profile, 240 LED/mtr power factor >= 0.9, 900lm/mtr, Warm light and including all necessary accessories as required complete. (Brand and Model:- Philips or equivalent approved make mentioned in tender documents.)

Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make:- or equivalent approved make).

Supply of 450 mm sweep, 900 rpm heavy duty exhaust fan in metal body with louvers working on 230 V AC supply complete with all accessories as required.

Installation, testing and commissioning of pre-wired, LED/ fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of LED down lighter fittings on false ceiling with all mounting accessories as required complete including interconnections using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor as required.

Installation, testing and commissioning of High bay/Mid bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5Sq.mm PVC insulated flexible copper conductor cable as required.

Installation, testing and commissioning of ceiling fan, including fixing the regulator, wiring using down rod of 100cm length using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc. as required.

Installation, testing and commissioning of LED Strip Light with profile and wiring using 3 runs of 1.5 sqmm FRLS PVC insulated stranded copper conductor cable as required.

Supply, installation testing and commissioning of of LED bollards with not more than 650 mm in height. LED lamp 9+/2W in the fixture. The body shall be powder coated extruded aluminium. Luminaries provided with LED driver suitable for operation on 240V, 50Hz single phase ac supply.The fixture shall have IP65 class protection shall be provided with all accessories and civil foundations. (Brand and Model:- Philips 58171 or equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 9m long Hot dipped GI pole painted with PU coat with built- in control box prewired, with pole suitable for mounting LED luminairie with lamp , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories. complete including necessary civil foundation. Along with LED Lamp with die cast Aluminium alloy housing and polycarbonate diffuser, inbuilt driver,system wattage maximum of 90(+/-10) watts, lumen outputnot less than than 12500 lumen, System efficacy not less than 138 lumen per watt ,power factor >= 0.9, IP 66 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly. (Luminairie Brand and Model: BGP300 LED50 740 PSU PC SPD IN S1 or equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 5m long Hot dipped GI pole painted with PU coat with built- in control box prewired, with pole suitable for mounting LED luminairie with lamp , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories complete on necessary civil foundation. Along with LED Lamp with die cast Aluminium alloy housing and polycarbonate diffuser, inbuilt driver,system wattage maximum of 30(+/-5) watts, System efficacy not less than 95 lumen per watt , and lumen output greater than 2800 lumen, power factor >0.9, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly. (Luminairie Brand and Model: BGP300 LED28 757 PSU PC SPD IN S1 OR equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 3m long Hot dipped GI pole painted with PU coat with built- in control box prewired, with pole suitable for mounting LED luminairie with lamp , concealed wiring with 3Cx 2.5 sq.mm copper wire from the control box to light fixture, and all other accessories complete on necessary civil foundation. Along with LED Lamp with die cast Aluminium alloy housing and polycarbonate diffuser, inbuilt driver,system wattage maximum of 25(+/-5) watts, System efficacy not less than 95 lumen per watt , and lumen output greater than 2200 lumen, power factor >0.9, IP 65 compliant including all necessary accessories as required complete. Note:Incoming and outgoing cable at termination box shall be terminated with glands properly. (Luminairie Brand and Model: BGP300 LED28 757 PSU PC SPD IN S1 OR equivalent approved make mentioned in tender documents)

Supply , installation, testing and commissioning of 10+/-2w LED Bulkhead fitting with die cast aluminium housing, PC diffuser and IP65 Protection suitable for operation on 230V 50Hz AC, wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (Brand and Model:- Philips WT202W LED6S NW PSU S2 PC or equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 12+/-2w LED Inground up-lights with aluminum housing, waterproof connectors diffuser, Light Colour :- 3000k, Able to handle surge protection up to 2 kV and IP65 Protection IK10,, dust & rain + protected from temporary immersion in water suitable for operation on 230V 50Hz AC, ground including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (IK67, IP67 rated, pass 20KN static load and 500hrs salty spray test) (Brand and Model:- Philips BBP342 LED1200/WW 12W 20D 100-240V or equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 12+/-2w LED Spike fitting with aluminum housing, waterproof connectors diffuser, IP65 Protection, Light Colour :- 3000k, LED COB Integrated Lamp Base suitable for operation on 230V 50Hz AC, ground including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (IK67, IP67 rated, 500hrs salty spray test). 600 Lumen min out put. (Brand and Model:- Philips 31386 or equivalent approved make mentioned in tender documents)

Supply, installation, testing and commissioning of 5+/-2w LED Steplight fitting with die cast aluminium housing, diffuser, waterproof connectors and IP65 Protection suitable for operation on 230V 50Hz AC,LED step-light is IP67/IK10, Light Colour :- 3000k wall including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (Brand and Model:- Philips BWG150 LED50/WW PSU 220-240V IP67 7043 or equivalent approved make mentioned in tender documents)

Supply,installation ,testing and comissioning of maintenance free earthing using 4 mtrs length, 20mm dia 250 microns molecularly copper bonded steel rod, stainless stell connectors and fasteners for connecting earth strip.The earth electrode shall be filled with earth enhancing compound (12.5 kg mineral compound / 22.6 kg low resistivity graphite compound).FRP (UFE FRP)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 300mmx 300mmx 300mm with a weight bearing capacity of 15KN.The item shall be inclusive of installation charges,including digging bore,providing all required accessories like terminal connector,screw for fixing earth pit cover etc.

Providing and fixing Cu strip/wire on surface or in recess for connections etc. as required. 25mm X 3mm Cu

Providing and fixing Cu strip/wire on surface or in recess for connections etc. as required. 10 SWG Cu

Supplying and laying Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). 25mm X 3mm Cu

Supplying and laying Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). 10 SWG Cu

Supply and fixing anodised aluminum glass framed shock treatment chart.

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supply of First aid box

Supply and providing ISI marked electrical 3.3 kV grade anti-skid rubber mat as per IS:5424.forthe following sizes. 2mx1mx6mm thick

Supply and providing ISI marked electrical 3.3 kV grade anti-skid rubber mat as per IS:5424.forthe following sizes. 2mx1mx12mm thick

Supply and fixing single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required complete on wall.

4.5Kg CO2 fire extinguishers, wall mounting type.

Supply and fixing of 8 mm Aluminum Round Conductor as horizontal air terminal for parapet wall/terrace with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3

Supply and fixing of 8 mm Aluminum Round Conductor as down conductor with the required mounting clamps , cross connectors , expansion piece and other accessories required as per IEC 62305-3

Providing and fixing of test joint suitable for hot dipped galvanized steel tape 30 mm x 3mm and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm.

Providing and laying hot dipped galvanized steel tape 30 mm X3 mm from earth electrode directly in ground as required.

Liasion cha+B111:B126rgs for Electrical inspectorate sanction, statutory approval, Initial NOC and final NOC. (Note:The contractor shall arrange to obtain all necessary approvals for the electrical installation as required by the prevalent laws of the state of Kerala. The layout plans including the Earthing and Lightning Protection schemes shall be approved by the Regional Electrical Inspectorate Office prior to taking up the work. Approval for the installation as a whole from the Regional Electrical Inspectorate Office after the installation is complete shall also be the responsibility of the Contractor. Necessary application forms as required to be filled up and submitted to the Regional Inspectorate Office shall be procured, filled and submitted for approval and the required approval obtained by the electrical contractor prior to asking for the HV line to be energized. All expenses towards the overall approval of the installation including the statutory fees will be borne by the contractor. KSEB supervision charges shall be paid by the contractor and the same can be reimbursed on submitting the payment document proof to the Client)

YES YEM CONSTRUCTION (BID ID -2214462)

saaj constructions (BID ID -2214943)