NIQ-07 - (EL) of 2024-2025 (SL NO 02)

Amount

Supply, installation, testing & commissioning of cubicle type both side openable Indoor type dust and vermin proof powder painted Panel board having fixed with front side double door with railway type locking arrangement suitable 415V 3 phase, 4 wire 50 Hz AC supply made out of 2 mm thick CRCA sheet so as to accommodate the following mountings complete with copper bus bar, cable allay & channel base at the bottom connection & interconnection by copper wire & strip along with Danger Board and necessary nuts & bolts complete as reqd. (L&T/Siemens/Schneider/Legrand) 415V, 36 Ka 630A 4P MCCB - 1 nos. 415V 630A Bus Bar 415V, 36 Ka 250A 4P MCCB- 2 nos. 415V, 36 Ka 160A 4P MCCB- 3 nos. 415V, 36 Ka 63A 4P MCCB- 2 nos. Indicating Lamp-3 nos. Digital Voltmeter- 1 no. Digital Ammeter- 1 no. Danger Board- 1 no. and all other accessories.

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Up to 250A 8 WAY

Supplying and fixing double door 8 WAY Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection,complete on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Supplying and fixing double door 4 WAY Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection,complete on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Supplying and fixing 250A 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

Supplying and fixing 160A 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 63A TP MCB

100A TP MCB

40 A TP MCB

40 A DP MCB

63 A FP MCB

6-32 A SP MCB

Supplying and fixing double door 6 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supplying and fixing double door 2+12 way SPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.

Supplying and fixing MCB SS enclosure with IP- 20/30 protection, pwder coated provision for two Four pole (4P) MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supply 1.1 KV grade PVC Armoured XLPE insulated AL conductor cable . i) 3.5 core X 95 sq.mm. (make: approved by EIC)

i) 3.5 core X 70 sq.mm. (make: approved by EIC)

i) 3.5 core X 50 sq.mm.(make: approved by EIC)

i) 3.5 core X 35 sq.mm.(make: approved by EIC)

i) 3.5 core X 185 sq.mm. (make: approved by EIC)

Laying of cable as below, after cutting floor/pavement/wall and making holes incl. embeded the cable at an average depth as below and mending good damages to original finish incl. removing the rubbish. From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc

From 35 sqmm to 50 sqmm at an average depth of 75 mm in floor/pavement/wall etc

From 50 sqmm to 95 sqmm at an average depth of 75 mm in floor/pavement/wall etc

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. i) 3.5 core X 185 sq.mm.

i) 3.5 core X 95 sq.mm.

i) 3.5 core X 70 sq.mm.

i) 3.5 core X 50 sq.mm.

i) 3.5 core X 35 sq.mm.

Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. i) 3.5 core X 185 sq.mm.

i) 3.5 core X 95 sq.mm.

i) 3.5 core X 70 sq.mm.

i) 3.5 core X 50 sq.mm.

i) 3.5 core X 35 sq.mm.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] a) Avg run 12 mtr.

b) Avg run 9 mtr. (make: approved by EIC)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC On Board.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI/PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI /PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of 250 V 300 mm. sweep,1400 rpm industrial type heavy duty (ISI)high speed exhaust fan.

Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

Supply of 250 V 1400 mm sweep AC ceiling fan complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing down rod, an necessary connection.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire.

Supply of high speed wall mounting Air Circulator bracket fan 240 V 600 mm sweep fixed with close mesh guard , arrangement for speed control and sturd and heavy duty blades for higher displacement of air .

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply of 240V LED tube light mounting rail lighting luminaire to be fixed on ceiling for TLED lamp with necessary connection and earthing attachment .

Fixing only Single/twinfluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Supply of surface mounted 18 watt LED down lighters which range is a breakthrough technology and reliable heat management to deliver a long lasting efficient solution . (make: approved by EIC)

Supply of LED Bulkhead that fits in vartiety of applications and serves as simple energy efficient alternative to CFL/incandescent bulkhead luminaires

Supply & Fixing of 5mtr length LED Strip/cove light (make: approved by EIC)

Supply & Fixing of LED Step light (make: approved by EIC)

Supply & Fixing of LED signage (Entry/Exit) luminaies with built in battery back-up for 2 hrs

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 10 W LED lamp.

Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc.

Supplying and fixing 19 mm dia and 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

Supplying and fixing PVC casing-capping on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works: 20x10mm Size (make: approved by EIC)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works: 20mm size (make: approved by EIC)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe by the GI fish wire and making necy. connection as required. a) 4×10 sq.mm. + 2×6 sq.mm. (make: approved by EIC)

b) 2×10 sq.mm. + 1×6 sq.mm. (make: approved by EIC)

d)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) (make: approved by EIC)

e)3 x 22/0.3 (3x1.5 sqmm) (make: approved by EIC)

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil

i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

H.A.V.C System Supply, installation, testing and commissioning of 8.5 TR Ductable Type Unit of minimum cooling capacity comprising Indoor unit & Outdoor unit. Outdoor unit shall comprises of air cooled Copper condenser & scroll compressor. Refrigerant R410 A .Unit shall have refrigerant circuit clubbed with all electrical drive & other standard accessories (make: approved by EIC)

Supply, installation, testing and commissioning of 1.50 TR nominal capacity Hiwall split unit, 3 star, copper coil including all necessary piping with insulation and cabling etc. complete as per El C.

Installation of 8.5 TR Ductable ODU Mounting, Indoor Hanging, connecting pipeline (both Ref. & Cond.) Electrical, Testing & Start Up.

Installation of 1.0, 1.5 & 2.0 TR Thr Wall ACs ODU Mounting, Indoor Hanging, connecting pipeline (both Ref. & Cond.) Electrical, Testing & Start Up.

Supply, installation, testing & commissioning of Refrigerant Copper piping with 13mm thk. Nirtriline rubber insulation - For ductable Ac

Supply, installation, testing & commissioning of Refrigerant Copper piping with 13mm thk. Nirtriline rubber insulation - For Hi Wall Type Ac

Supply, installation, testing & commissioning of Condensate Drain piping from indoor units with 9 mm insulation.

Supply, installation, testing & commissioning of Control cabling between IDU & ODU Hi Wall

Fabrication, supply, installation, testing & commissioning of ducting complete with splitter dampers, turning venes, supports etc. G.I Ducting 22g

G.I Ducting 24g

Supply, installation of Iron angle for duct support

Supply, installation of Al. powder coated air grilles for supply & return air

Supply, installation of Volumn control dampers in ducts.

Supply, installation, testing & commissioning of canvas connection at Air Handling Unit and Machine outlet

Supply Duct thermal insulation with Nitrile insulated fixed with adhesive. 13 mm thick

Acoustic lining of duct work with 25mm thick Resin bonded Fibreglass & mechanically fastened with GI nut & bolts & covered with 28G perforated sheet.

Loading, unloading of Airconditioners Machine .

Supply, erection, testing & commissioning of 1 Loop Addressable Fire Alarm Control Panel surface mounting FACP certified to EN54-2/EN54-4 norms with 8x40 character LCD capable of 127 devices per loo

Supply, erection, testing & commissioning of Multi-Heat Sensor incorporating a thermal element and a High Performance photoelectric smoke chamber. Has three modes controlled from the Control Panel, allowing either the optical or thermal element or both to be active in making the fire decision

Supply, erection, testing & commissioning of Beam Smoke Detector consists of an emitter and receiver that cover a distance of 5 - 100m providing a maximum coverage of 1500m2. Features an automatic signal strength adjustment facility and is also available with a latching or a non-latching relay.

Supply of power supply unit 24VDC-3A for Beam Detector

Supply, erection, testing & commissioning of Single Zone Monitor designed to allow up to 6 conventional detectors or 1 SPCET/SRA-ET beam detectors to be interfaced to Hochiki’s ESP analogue addressable system. Also available as a DIN Rail mountable version. Both models feature an integral short-circuit isolator.

Supply of Surface Mounting base for modules.

Manual Call Point

Hooter

PVC Conduit

Cooper FR Cable -2C-1.5sq.mm

ABC -4Kg

Supply of 54x3W CE certified LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option. undergone through 7 Tank chemical treatement to keep them rust free and, black matt texture finish and technical specifications as below. • Lamp - 54 X 3W RGB LED (12R+18G+18B+6W) • Power consumpsion - 160W • Power supply - 230/240V AC • Channels - 8 Channel DMX-512 • Beam angle - 25° • Control mode - DMX, and Manual. • Function - strobe, Dimming, sound active. Make: (make: approved by EIC)

Supply of 54x3W RGBW LED Wash light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option. undergone through 7 Tank chemical treatement to keep them rust free and, black matt texture finish and technical specifications as below. For Cyclorama use. • Lamp - 54 X 3W RGBW LED • Power consumpsion - 160W • Power supply - 230/240V AC • Channels - 8 Channel DMX-512 • Beam angle - 25° • Control mode - DMX, and Manual. • Function - strobe, Dimming, sound active • Dimensions : L 350 x W 150 x H 325mm • Protection : IP20 Make: (make: approved by EIC)

SITC of 1000W mini flood light under gone through 7 tank process with various chemnical teartment to keep them rust free made out of CRCA fabricated housing which is perforated from top and bottom for effective and efficient ventilation on vertical and horizontal axis for natural flow of air to provide sufficient cooling and built in very sturdy and capable of withstanding rough handling,power cord with 16amps CE plug and normal yoke but without lamp and technical specifications as below.Housing - MS fabricated construction with black epoxy polyester powder coated.Reflector - Aluminum reflector, sand blast anodised aluminum.Lamp type - 1000W tungsten halogen lamp, base R7s,Lamp Socket -R7s,Dimming option- 0-100% using Digital DMX control through Dimmer,Protection rating - IP20,Power supply - 230/240V AC,Power cable - 3 core 1.0 sq. mm. copper PVC insulated cable with 10A DPST toggle switch.Dimension - 376x267x150mm Make: (make: approved by EIC)

SITC of 19°, 750W stage profile spot light powder coated diecast body with below specification • Lamp 750W HPL • Beam spread 19° • Dimension of 560 x 340 x 430mm • 6432 lux at 5mtr • Weighing 6.2Kg, • Dichroic reflector, • G9.5 lamp base • 4 Beam shaping shutters • Normal yoke with adjustable keys for tilt rotation • Fine adjustment in lamp focus position for adjustment. Make: (make: approved by EIC)

SITC of 1000W Halogen Theater Spot light with 150mm diameter plano covnvex lens and technical specifications as below. • Lamp - 1000W 230V single ended lamp, Lamp Socket - Gx9.5 • Power supply - 230/240V AC • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Beam angle - 40° • Housing - MS fabricated construction with black epoxy polyester powder coated. • Reflector - Aluminium reflector, sand blast anodised finished. • Protection rating - IP20, • Lens - 6" diameter. Make: (make: approved by EIC)

SITC of 1000W CE Certified halogen Fresnel spot light providing illumination of 28000 lix at 2 mt in spot at 10° beam angle while 4600 lix at 2 mt when operated in flood at 48° beam angle , dimension as 290 x 405 x 290mm, 150mm aid German lens, weight of 4.6Kg, Gx9.5 base lamp socket,power cord with 16amps 3 pin CE plug and normal yoke but without lamp and accessories. Lamp - 1000W 230V single ended lamp Power supply - 230-240V AC,Lamp Socket - Gx9.5,Housing - Light weight, rugged and reliable both indoor and outdoor,Robust per-treated fabricated housing with die cast component and epoxy polyester,Distribution - Delivers smooth uniform field across the entire spread from spot to flood focusing,Switching options - Local control and Digital DMX control through Dimmer,Dimming option - Digital DMX control through Dimmer,Reflector - Spherical high reflective aluminum anodized,Yoke - Fabricated using MS flat-accepts mounting on 16mm spud,Focus - controlled by front & rear thermoplastic knob. Make: (make: approved by EIC)

SITC of 1000W spun aluminum PARCAN made out of spun aluminum 16 SWG in 2 piece cylindrical construction with punched slot on Par can housing for natural ventilation and floating ceramic GX16d base lamp socket,Yoke made of MS flat 25 X 3mm with 13mm free mounting hole to fit the adapter, spigot with 28mm and filter frame but without lamp. "Lamp: 1000W 240V PAR-64,Lamp Socket: Ceramic type GX 16D,Housing: Aluminum sheet cylindrical construction with black epoxy polyester "Switching options: Local control and Digital DMX control through Dimmer,Dimming option: Digital DMX control through Dimmer,Yoke: Fabricated using MS flat-accepts mounting on 28mm spud Focus: Sealed beam angle,Accessories: Filter frame. Make: (make: approved by EIC)

SITC of Motorized winch to be used as 10m Light bar with Frill attachment made of 40NB made up of SAIL/Jindal make dual barrel of 2 mm thickness along with 3PH AC motor (REMI Make) having noise level of less than 70 dB with DC Brake Necessary pulley, guide pulleys GI wire rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fiber/steel core at center, winding drum Specially designed compact worm gear box Cam type double Upper and lower limit controller Requisite trunking arrangement it, made of 22SWG CRCA Mild steel in 2 pieces with Epoxy polyster powdered coated in black texture with individual length of flip flop of 1300mm, thickness of 22mm, width of 116mm. Make: (make: approved by EIC)

SITC of Fixed FOH 12 mtr made using 40NB dual barrel arrangement along with movable arrangement in between undergone 7Tank chemical treatement to keep them rust free and powder coated and provided with cable trays and adjustable bar arrangements. Make:(make: approved by EIC)

SITC of MS Power junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 4 way 10A IEC Socket of below specifications:- • Fixing : Snap fit /15 (1.5mm) • Terminations : /28 (2.8mm solder) • Total Max Rating : 10A, 250V a.c • Operating Temp : –20˚C to +70˚C • Mouldings : Nylon, Flammability Rating UL94V-0 Make : (make: approved by EIC)

SITC of MS Power junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 1 way 16A CEE Socket of below specifications:- • Amperage : 16A • Poles : 3p (2P+PE) • Earth 'Clock' Position : 6h • Voltage : 200 up to 250V • Frequency : 50 and 60Hz • Color code : blue RAL 5015 • Connection Design : Screw Terminal • Max Conductor : 4,0 mm² • Material of Enclosure : Polyamide • Contact Carrier : contact carrier made of Polyamide, the contacts are brass Make : (make: approved by EIC)

SITC of MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX out connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground Make : (make: approved by EIC)

SITC of MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish finish 5 pin XLR DMX in connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground. Make : (make: approved by EIC)

SITC of MS DMX lighting junction loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground. Make : (make: approved by EIC)

SITC of MS fabricated power marshalling box made up of 20SWG CRCA sheet undergone through undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish ivory connect conectwell make and FC-11 naylon gland,Brass galnd suitable for power cable with proper earthing connecter . Make : (make: approved by EIC)

SITC of MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors. Make : (make: approved by EIC)

SITC of fabricated RACK for housing PDCP(with MCBP) and DIMMER modules. Make : (make: approved by EIC)

SITC of MS Fabricated made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections. Make : (make: approved by EIC)

SITC of Well designed and engineered Wall mount 3 feeder motor control centre panel with necessary meterings and contactors and relays to control motorised system (MCCP- 3) Make : (make: approved by EIC)

SITC of Well designed and engineered Wall mount 12 feeder Remote control panel with necessary meterings and contactors and relays to control the control motorised system.(RCP-3) Make : (make: approved by EIC)

SITC of MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 glands. Make : (make: approved by EIC)

SITC of MS sheet metal fabricated emergency push button station undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for emergency trip. Make : (make: approved by EIC)

SITC of Internal earthing copper bare conductor network related to work coming under our scope.

SITC of Installation hardwares such as clamps, connectors, glands, lugs, ferruels, welding rods etc.

SITC of MS perforated trays with tray lid treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement . Make : Customised / Canara Lighting./Leksa Size 40 x 150 x 40mm

SITC of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications: • Power Supply: 90-240V AC, 45-63Hz. • Control: DMX 512 protocol, • Control Signal input: 5 pin XLR female, • Size: 482 x 44 x 128mm , • Weight: 2Kg.with splitter bracket. Make: (make: approved by EIC)

Digital Lighting Console with 1024 DMX channels • 1024 Channels. • 96 Fixtures. • 96 Dimmer Control Channels. • Time control of scenes: Fade in/out, LTP slope • Channels for each fixture 40 primary + 40 fine tune • LCD display with back light • 60 Scenes/Playbacks • 10 Scenes to run simultaneoulsy • 600 Scene step • Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus • Master slider - Global, playback, fixture • USB Memory - FAT32 supported Make: (make: approved by EIC)

SITC of Rack mount 12 channel (12chx2.5KW) Dimmer pack with following features and Specifications: Features:Automatic frequency sensor can detect power frequency (45Hz – 63Hz) in different areas & stabilizes the dimming output.Output can be limited from 50% to 100% for over load protection.The thermo-controlled fan will be activated automatically when the temperature is over 45oC.The intelligent thermo-protection will cease the output when over 85oC and restart output when below 65oC. Self testing function to test without a console.Each channel can be set as dimming or non-dimming.Dimming level & internal temperature monitor.Each channel is equipped with a N.F.B.Easy wiring.Specifications:Power Supply: 100-240V AC, 45-63Hz.Output: Maximal 20A per channel.Control: DMX 512 protocol.Size: 482 x 132 x 316mm , Weight: 13.5Kg. Make:(make: approved by EIC)

Consumables:- SITC of 5 pin XLR male / female connectors. Make: (make: approved by EIC)

SITC of 5 Pin XLR Termination plug. Make: (make: approved by EIC)

SITC of Valcro Tape (White if available)

SITC of Assorted colour gel filter roll size 4ft x 25ft.

Cables :- SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx2.5 sq mm. Make: Walna / SBEE / Polycab.

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 12cx2.5 sq mm. Make: (make: approved by EIC)

SITC of FRLS PVC copper multistrand flexible cable 7 core x 1.5 sq.mm. Make: (make: approved by EIC)

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 24cx0.5sq mm. Make: (make: approved by EIC)

SITC of PVC Copper armoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx4 sq mm. Make: (make: approved by EIC)

SITC of DMX signal cable for DMX network. Make:(make: approved by EIC)

SITC of 2-way passive loudspeakers, Bass-reflex type; Components: LF: Diameter: 15" cone, Voice Coil: 2.5", Magnet: Ferrite; HF: Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite; Frequency range (-10dB): 49 Hz - 20 kHz; Coverage area: H90ﾟ x V60ﾟ; Crossover: 2.0 kHz; Nominal impedance: 8 Ω; Power rating: 500W PGM; 1000W Peak; I/O connectors: SpeakON NL4MP x 2 (Parallel); Sensitivity: 95 dB SPL; Peak: 125 dB SPL; Cabinet material: Plywood Make(make: approved by EIC)

SITC of Bass-reflex subwoofer; Frequency range (-10dB): 32 Hz - 3.5 kHz; Components: LF: 18" Cone, 4" Voice Coil, Ferrite magnet; Power rating: 1000W (PGM), 2000W (PEAK); Sensitivity (1W; 1m on axis): 100 dB SPL, Peak: 133 dB SPL; Enclosure Material, Finish, Color: Plywood, Durable Polyurea coating.Make-(make: approved by EIC)

SITC of Four (4) channel high power Dante amplifier with Output power 1kHz Non-clip 20msec Burst all channels driven 600W x 4 @ 16Ω, 1200W x 4 @ 8Ω, 1900W x 4 @ 4Ω and 2500W @ 2Ω; 3800W x 2 @ 8Ω (BRIDGE mode); 5000W x 2 @ 4Ω (BRIDGE mode); Sampling frequency rate: 96kHz; A/D D/A Converters: AD: 24-bit linear; DA: 24-bit linear; THD: 0.01% (8Ω, 1kHz, 10W, All channels driven), 0.1% (4Ω, 1kHz, Half power, All channels driven); Frequency response: +0.5, -1.5dB @8Ω, 1W, 20Hz to 20kHz (HPF Thru); Input impedance: 20kΩ (Balance); I/O Connectors: Analog: XLR-3-31 x 4; Digital I/O: Dante Interface: etherCON x 2 (Redundant/Daisy Chain); Processors: 20 x 8 input matrix mixer, Room EQ: 16 band IIR EQ, Room Delay: 0 - 1000msec, Speaker Processor: X-Over (IIR/FIR*), PEQ (16 band IIR/FIR*), Delay, Peak Limiter, RMS Limiter Inbuilt Load protection, Amplifier protection & Power supply protection Make-(make: approved by EIC)

SITC of 2-way, 1000 watt Bi-amped Powered Speaker, Bass-reflex speaker; Frequency range (-10dB): 55 Hz - 20 kHz; Coverage area: H90ﾟ x V90ﾟ; Crossover: 1.8 kHz: FIR-X tuning™ (linear phase FIR filter); Components: LF: Diameter: 12" cone, Voice Coil: 2.5", Magnet: Ferrite; HF: Diaphragm: 1.75", Type: 1" throat coaxial compression driver, Magnet: Ferrite; Maximum Output Level: 129 dB SPL; Cabinet material: Plywood Make-(make: approved by EIC)

SITC of 2 Way, bass reflex type surface mount speakers with superior sound quality. Components: LF: 8"cone driver; HF: 1" soft dome; Frequency range (-10dB): 51Hz - 20kHz; Nominal coverage: H x V: 100˚ x 100˚; Crossover: 2.8kHz; Power rating: 180W PGM; Transformer taps: 60W, 30W, 15W @ 100V; Sensitivity (1W; 1m on axis): 91dB SPL; Peak: 117dB SPL; Cabinet material: ABS; Waterproof rating: IP35 Make-(make: approved by EIC)

SITC of Two (2) channel power amplifier with Output power 1kHz Non-clip 20msec Burst Both channels driven 300W x 2 @ 8Ω & 2Ω and 500W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection

SITC of 2-way passive loudspeakers, Bass-reflex type; Components: LF: Diameter: 10" cone, Voice Coil: 2", Magnet: Ferrite; HF: Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: Ferrite; Frequency range (-10dB): 55 Hz - 20 kHz; Coverage area: H90ﾟ x V60ﾟ(Rotatable); Crossover: 2.5 kHz; Nominal impedance: 8 Ω; Power rating: 350W PGM; 700W Peak; I/O connectors: SpeakON NL4MP x 2 (Parallel); Sensitivity: 93 dB SPL; Peak: 122 dB SPL; Cabinet material: Plywood Make-(make: approved by EIC)

SITC of Two (2) channel power amplifier with Output power 1kHz Non-clip 20msec Burst Both channels driven 500W x 2 @ 8Ω & 2Ω and 800W @ 4Ω; Sampling frequency rate: 48kHz; A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling; THD: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power); Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz); Input impedance: 20kΩ (Balance), 10kΩ (Unbalance); I/O Connectors: Speaker output: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2; Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2; Inbuilt Load protection, Amplifier protection & Power supply protection Make-(make: approved by EIC)

SITC of Digital Signal Processor : Mixing channels : Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Direct-in to Matrix/ Output Busses : 8 Mono , Input channel functions : Mono CH : 3-band PEQ, Comp, Gate, Auto Gain Control, Feedback suppressor (only available in ch 1-4)/ Stereo CH: 3-band PEQ, Comp, Auto Gain Control , Output channel functions : Room Delay, Room EQ, Speaker Processor, X-Over (1way,2way), Delay, 6-band PEQ, Limiter. Make-(make: approved by EIC)

SITC of Mixer : Mixing channels 24 Line Inputs (16 mono and 4 stereo) ; GROUP 4 GROUP Buses + ST Bus ; AUX 6 AUX Sends + 2 FX Sends ; MATRIX 1 Matrix out ; On-board processors FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) Make-(make: approved by EIC)

SITC of Dynamic microphone with Cardioid polar pattern; Frequency Response: 60 Hz - 15 kHz; Sensitivity: 2.5 mV/Pa (-52 dB); Output Impedance: 600 Ω; with XLR connector Make-(make: approved by EIC)

SITC of Wireless Handheld Mic with Receiver AF frequency response 50 to 16,000 Hz (–3 dB) , Housing Metal, microphone: robust ABS , Power supply 12 V DC nom. / 300 mA , Transmitter Microphone dynamic , Frequency response 50 to 16,000 Hz (–3 dB) , THD, total harmonic distortion ≤ 0.9% , Pick-up pattern cardioid , Signal-to-noise ratio ≥ 103 dBA , RF output power 10 mW , Switching bandwidth up to 24 MHz , Operating time approx. 10 hrs , Modulation wideband FM , Frequency 8 frequency banks, each with up to 12 factory-preset channels Sensitivity < 3 μV at 52 dB(A)rms S/N , Squelch switchable from 3 dBμV to 28 dBμV (via Pilot Tone) , Power supply 2 AA size batteries, 1.5 V (Approved Make:(make: approved by EIC)

SITC of Professional cardiod moving coil dynamic microphone for vocal of frequency 50 Hz to 15Khz. Make : (make: approved by EIC)

SITC of Instrumental Microphone with Pick-up pattern super-cardioid ; Sensitivity in free field, no load (1kHz) 3 mV/Pa = - 50dB (0 dB = 1 V/Pa) ; Nominal impedance 50 Ω; Min. terminating impedance 1000 Ω; Phantom powering 12 – 52 V / 3 mA ; Equivalent noise level 24 dB(A) ; Equivalent noise level weighted as per CCIR 468-3 ; 35 dB ,Maximum sound pressure level (passiv) 139 dB/SPL ; (Approved Make:(make: approved by EIC)

SITC of the Gooseneck Mic & Base with element Fixed-charge back plate, permanently polarized condenser ; Transducer principle- pre-polarised condenser microphone; Acoustics- cardioids; Frequency response- 50 Hz - 20 kHz; Nominal impedance- < 100 Ohm , Maximum sound pressure level- 130 dB SPL; Equivalent noise level- 26 dB (A); Equivalent noise level; weighted as per CCIR 468-3- 37 dB; Phantom powering- P12 - P48 V; Current consumption microphone- 3 mA; Connectivity- XLR 3M; Weight- 147 g (4,72 oz); Length- .450 mm (17,72“); Diameter- 8 mm (0,31“); Operating temperature- .0+40°C; (Approved Make:(make: approved by EIC)

SITC of Professional boundary layer Microphone Make : (make: approved by EIC)

SITC of Professional Overhead Microphone Make :(make: approved by EIC)

SITC of 10 KVA servo voltage stabilizer. (Approved Make : (make: approved by EIC)

SITC of 32U 600 mm x 800 mm rack with FAN-2Nos, Tray-2No, Hardware Set-2Nos, 5/15 Amp Powermanager-2No) (Approved (make: approved by EIC)

SITC of Chromium plated Mic Stand Long (Approved Make: K&M/ Ahuja)

SITC of Chromium Plated Mic Stand Short (Approved Make: (make: approved by EIC))

SITC of Suitable XLR Male - Female Connectors , Stereo Connectors, Speakon Connectors, Booster Connectors , 3.5 mobile Jack Connectors, (Approved Make: Neutrik/MX),Supply & laying of the Suitable 23/0.2 mm Microphone Cable , supply & laying of the Suitable 80/0.2 mm speaker Cable.((make: approved by EIC))

SITC of the Professional DVD Palyer.(make: approved by EIC)

Configuration, testing & commissioning of audio system , System Designing , Project Management & Supervision of the above-said systems and training programme to operate the said system

K.G. ENTERPRISE (BID ID -5708614)

Z STAR COMMOTRADE PVT LTD (BID ID -5695359)