GE(SOUTH)/AMB 30 2026 2027 CERTAIN REPAIR REPLACEMENT WORKS OF INTERNAL WIRING MCBs/DBs SUBMAIN EARTHING AND OTHER CONNECTED WORKS AT NORTHEN ZONE MD ACCN OF JCO/ORs AND ADJOINING AREA UNDER GE (SOUTH) AMBALA CANTT

Description all as per Item No 1.00 here in before but for geyser of cap 35/ 50 ltrs.

Supply only heating element of capacity 2 KW of geysers of any make/capacity complete all as specified and directed by Engr-in-Charge.

Supply only apparatus plate assembly with rubber gasket including nuts, bolts, washers for geysers of 50/35/25 ltrs capacity, complete all as specified and directed by Engr-in-Charge.

Supply only thermostat ISI marked suitable for the Geysers 25 ltrs capacity,of any make 20 Amps, 240 Volts AC, adjustable type, 210 mm long or nearest size as per sample complete all as specified and directed by Engr-in-Charge.

Supply only thermostat ISI marked suitable for the Geysers 50 ltrs capacity,of any make 20 Amps, 240 Volts AC, fixed type,300 mm long or nearest size, Set at 90+/-6 degreeC as per sample complete all as specified and directed by Engr-in-Charge.

Supply only temperature resistent SS braided PVC pipe heavy duty suitable to sustaine pressure up to 8 bar not less than 60 Cm long suitable for out going / Hot water connections of Geyser with washer etc. complete all as an directed.

Supply only Non-return valve 15mm / 20mm dia of brass as per requirement complete all as specified and directed by Engr-in-Charge.

Supply only Indicators of Geysers of any capacity/type (Red & Green) as per requirement complete all as specified and directed by Engr-in-Charge.

Supply only Geyser storage inner tank made out of stainless steel sheet suitable for 25 ltrs capacity complete all as specified and directed by Engr-in-Charge.

Supply only geyser storage inner tank made out of stainless steel sheet suitable for 50 ltrs capacity complete all as specified and directed by Engr-in-Charge.

Supply only safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/capacity complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair copper cable PVC insulated and PVC sheathed flexible size 2.5 Sqmm 3 core, complete all as specified and directed by Engr-in-Charge.(Cable shall be in suitable length as per site requirement).

Supply and fixing in repair PCB unit of suitable size for BLDC Ceiling fan of 1200mm sweep as per make of ceiling fan, single phase, 240 V complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose dismantaling of blades and deposit to store for repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair fan condencer 2.5/3.15/ 4 MFD, 240 volts suitable capacity for ceiling/ exhaust Fan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair ball bearing of suitable size and capacity, for ceiling/ Exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair shaft of suitable size and capacity for ceiling/ Exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins,canopy suitable for any type of fans and down rods complete all as specified and directed by Engr-in-Charge.

Material and labour for painting of ceiling fan using synthetic enamel paint in two coat over one coat of primer of any make/sweep/model etc after cleaning/washing and fill up cavities using filler complete all as specified and directed by Engr-in-Charge.

Material and labour for hanging only ceiling fan any type/sweep after repair and connecting up including provision of cable from ceiling rose to connector to fan including refixing of blades complete all as specified and directed by Engr-in-Charge.

Supply and fixing of GI fan rod 600 mm long , 15 mm dia medium duty with superior quality and nut and bolts with locking arrangement complete all as specified and directed by Engr-in-Charge.

Supply and fixing of GI fan rod 1.0 meter long , 15 mm dia medium duty with superior quality and nut and bolts with locking arrangement complete all as specified and directed by Engr-in-Charge.

Material and labour for taking down Exhaust fan / wall mounted fan of any size/ sweep after disconnecting the wire from existing ceiling rose dismantaling of blades and deposit to store for repair complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair metal fan blade including fixing mountings and accessories of exhaust fan of 230 to 450 mm sweep complete all as specified and directed by Engr-in-Charge.

Material and labour for fixing only exhaust fan any type/sweep after repair and connecting up including provision of cable from ceiling rose to connector to fan including refixing of blades, louvers etc complete all as specified and directed by Engr-in-Charge.

Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specified and directed by Engr-in-Charge.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, PVC conduit not less than 20 mm dia with accessories, concealed/surface type on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including pressed steel terminal boxes suitable for modular covered plate over sunken box for housing the modular switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for the following :- (a) One light point /fan point/Exhaust fan point/bell point controlled by one, one way switch and fan regulator (b) Metal flush/sunken Box, modular switch/socket cover plate & sheet are inclusive in the item rate quoted. (c) Only switches, socketes and fan regulators to be measured and paid seperately.

Description all as per item No 30.00 here in before but for socket out let point 6 Amps on same board complete all as specified and directed by Engr-in-Charge.

Description all as per item No 30.00 here in before but for socket out let point 6 Amps on independent board complete all as specified and directed by Engr-in-Charge.

Description all as per srl item No 30.00 above but point wiring for one socket out let 16&6 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular switches, one way, 16/20 Amps, one module, 230 volt , AC supply, complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular socket outlet 6/20 amps,3 pin, 2 module, complete all as specified and directed by Engr-in-Charge.

Supply and fixing fan regulator step type one module / 2 module, 100 W 230 Volts, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed by Engr-in-Charge.

Supply and fixing modular blanking plate 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified.

Supply and fixing door bell electric ,ding dong /musical type, single phase 230 volts, complete all as specified.

Supply and fixing of air circulator/cabin fan/wall mounting fan , plastic body of 400mm sweep, 230 volts including fan motor, blade set with high performance motor, better air delivery thermal overload protector with fitting accessories complete all as specified and directed.

Supply and fixing prewired metal enclosure modular power unit with 20 Amp mini MCB and 1x No. power socket with 1xNo 25 Amp 3 pin top plug for Geyser and taking down existing power unit complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED light fitting 1x20W , 220V, AC with Aluminium housing with batten type with driver , holder including 20W LED tube light, Cool White/Warm White, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt for connecting up with three core flexible copper conductor cable of suitablae size from celing rose to connector complete all as specified and directed by Engr-in-Charge.

Supply and fixing batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light, Aluminium housing in CRCA body suitable and including 10 watt LED energy efficient, AC 220-240 volts,duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Supply and fixing bulk head light fitting, 10 watt, LED Energy efficient with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED lamp 9 watt B-22 base, complete including taking down old existing lamp any type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair of bracket for security light made up of 25 mm dia suitable for security light, 0.9 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 120 lumen/watt and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED security light luminaire 45 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 120 lumen/watt and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair aesthetically designed wall bracket light of metal base with glass and B22 holder including 7 watt LED lamp Warm/Cool White & clear diffuser including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair post top lantern LED 30 W , cast aluminium spigot, with high effieient LED light, with poly carbonate diffuser, complete with high efficient LED 30 W and accessories internally pre wired, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt and including connecting up with three core 1.5 sqmm flexible copper conductor cable including disconnecting and taking down existing light fitting and removal complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED based Bollard light 10 watt with aluminium pipe housing with glare free PMMA Diffuser, IP 65, dia not less than 65 mm, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt including necessary excavation & PCC work etc complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LED based Bollard light not less than 15 Watt with aluminium pipe housing with glare free PMMA Diffuser, IP 65 of height not less than 1000mm and dia not less than 65mm, PF not less than 0.9,lumen efficacy not less than 100 lumen/watt including necessary excavation & PCC work etc complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Disconnecting and taking down old existing recess/surface mounting ceiling light fitting of any description and in any position and Supply and fixing surface/ recess mounting LED slim square/round down lighter 15W LED with high efficient LEDs glare free opal diffuser madeup of PDC AL with IP 20 Protection ,PF not less than 0.9, including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED Highbay light fitting 120 watt , pressure die cast housing, IP 65/66 protection, better optics for uniform distribution with multiplte LEDs suitable for ceiling suspended mounting with system efficiency upto 120 lm/W with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge.

Supply and fixing, Air ventilator made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200 copper winding of sweep 250 mm including taking down existing fan complete all as specified and directed by Engineer-in-Charge.

Supply and fixing recess/ surface mounted LED flat panel 2' x 2' with high efficient LEDs and glare free full decorative light fitting, energy efficient provided with including LED 36 watt, Cool White / Warm White, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and complete including disconnecting and taking down existing light fitting and removal complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED flood light highly efficient integral type, made of pressure die cast aluminium housing with 10 KV SPD lens & toughened glass IP 66, energy efficient provided with including LED 50 watt LED, duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and complete including disconnecting and taking down existing light fitting and removal complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED flood light highly efficient integral type, made of pressure die cast aluminium housing with 10 KV SPD lens & toughened glass IP 66, energy efficient provided with including LED 100 watt duly marked with relevent IS, PF not less than 0.9,lumen efiicacy not less than 100 lumen/watt with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting and complete including disconnecting and taking down existing light fitting and removal complete all as specified and directed by Engr-in-Charge.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6.0 sqmm drawn in and including rigid non metallic PVC medium grade 25mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed by Engr-in-Charge. NOTE: - 3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit.

All as per Item No 62 here in before but for Material and labour for sub main wiring of 4.00 sqmm. NOTE:- 3 run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with suitable size of rated bus bar, IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125 AMPS ,25 kA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs/thimbles/glands and making good the disturbed surface matching with existing surface including taking down existing unserviceable MCCB/DBs including MCBs complete all as specified and directed by Engr-in-Charge.

All as per Item No 65 here in before but VTPN DB alongwith MCCB 4 pole,100AMPS 16 KA as incomer and MCBs as out going complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including suitable size of fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets and making good the disturbed surface matching with existing surface including taking down existing unserviceable DBs including MCBs complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair SPN distibution board 4 way, double door, IP 43, as per IS 8623 including suitable size of fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets and making good the disturbed surface matching with existing surface including taking down existing unserviceable DBs including MCBs complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 6 to 32 Amps, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 40 to 63 Amps, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair MCCB four pole 415 volts, 125 Amps,25KA, 50 Hz, thermal release type, ICS=ICU=100% complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair MCCB four pole 415 volts, 100 Amps,16KA, 50 Hz thermal release type, ICS=ICU=100% complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB DB 4 way TPN double door powder coated complete alongwith suitable size of rated Bus bar, 415 Volts, IP 43 protection, suitable for MCB 4 Pole 63 Amp as incommer, Thimble/lugs of rating of MCB TPN should be used with wire for fixing in the MCB DB complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB TPN 63 Amps, 440 volt,10 kA, complete all as specified and directed by Engr-in-Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated,multi strand aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable circular/flat of size 10 Sqmm, including all incoming and outgoing connection with proper size of thimble complete all as directed and specified.

All as per Item No 76.00 here in before but one twin core cable circulat of size 06 Sqmm complete all as directed and specified.

Material and labour for taking down existing lighting fiting any type/size/Make/capacity i.e T/L, Surface/ Recess Panel, flame proof, wall light, bulk head, mirror light etc and re-fixing the same after minor repair/cleaning including replacement connection wire with suitable size coper wire twin core 0.75 sqmm for connection from ceiling rose to light fitting complete all as specified and directed by Engr-in-Charge.

Supply only switch piano 5 Amps, flush type, single pole, one way, 230 volt, AC supply, complete all as specified and as directed by Engineer-in-Charge.

Supply only switch, single pole two way 6 Amps, 230 volts AC circuit, complete all as specified and as directed by Engineer-in-Charge.

Supply only switch piano 15 Amps flush type one way 230 Volts, 50 Hz , AC supply, complete all as specified and as directed by Engineer-in-Charge.

Supply only bell push piano 5 Amps, flush type, single pole, one way, 230 volt , AC supply, complete all as specified and as directed by Engineer-in-Charge.

Supply only socket outlet piano 3 pin 6 amps, 230 volt. flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply only socket outlet piano 2 in 1, 6 pin 5 /16 Amp and multi pin flush type, complete all as specified and as directed by Engineer-in-Charge.

Supply only ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and as directed by Engineer-in-Charge.

Supply only fan regulator electronic step type ,230 Volts, AC supply, suitable for ceiling fan any type/make/sweep, complete all as specified and as directed by Engineer-in-Charge.

Supply only door bell electric ,ding dong /musical| type, single phase 230 volts, complete all as specified and as directed by Engineer-in-Charge.

Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge.

Supply only switch modular 6 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type, complete all as specified and as directed by Engineer-in-Charge.

Supply only switch modular 16 amps, one way single module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type complete all as specified and as directed by Engineer-in-Charge.

Supply only socket modular 6 amps, 5 pin combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type, complete all as specified and as directed by Engineer-in-Charge.

Supply only socket modular 6/16 amps, 2 in 1, combined universal socket 2 module with and including necessary frame and cover i.e. inner and outer plate as per existing make and type, complete all as specified and as directed by Engineer-in-Charge.

Supply only fan regulator step type one module / 2 module, 120W, 230 Volts, 50 Hz, AC complete with and including necessary frame and cover i.e. inner and outer plate as per existing make and type, complete all as specified and as directed by Engineer-in-Charge.

Supply only 6Amp bell push modular with and including necessary frame and cover i.e. inner and outer plate as per existing make and type, complete all as specified and as directed by Engineer-in-Charge.

Supply only Fan condenser 2.5 mfd complete all as specified and as directed by Engineer-in-Charge.

Supply only Cable PVC copper conductor flexible twin core 0.75 mm, complete all as specified and directed by Engr-in-Charge.

Supply only MCB single pole, 240 volts, 50Hz , breaking capacity 10KA,6 to 32 Amps, complete all as specified and as directed by Engineer-in-Charge.

Supply only MCB single pole, 240 volts, 50Hz , breaking capacity 10KA,40 to 63 Amps, complete all as specified and as directed by Engineer-in-Charge.

Supply only MCB single pole and neutral 240 volts, 16 to 32 Amps,10KA, 50 Hz, complete all as specified and as directed by Engineer-in-Charge.

Supply only MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz, complete all as specified and as directed by Engineer-in-Charge.

Supply only 3 pin Top plug, 16 Amp , 240 volts AC , ISI marked complete all as specified and directed by Engr-in-Charge.

Supply only metal clad top plug, AC Plug, 20 Amp, 230 Volt AC complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair driver for bollard light, recess/ ceiling light of 10 to 20 watt of suitable size and easy installation as per existing make all as specified and as directed.

Supply and fixing in repair driver for post top lantern and security light of of 30 to 45 watt of suitable size and easy installation as per existing make all as specified and as directed.

Supply and laying of LT undergroung cable, XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 6 Sqmm 2 Core, with suitable size of PVC Concealed/ surface conduit alondwith necessay fixing accessories (for Gate lights, Garden Lights and Garrage) complete all as specified and directed by Engr-in-Charge.

NOTE:- Amount of credit of Rs. 96,312.00 for retrieved materials is mentioned in Schedule of Credit Page No 19 & 20 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Please Enable Macros to View BoQ information