WBMAD/ULB/RM/ NIT-18e/25-26/SL1

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : (a) By ISI-Medium GI pipe [PWD Schedule Page No-G-1 Iteam No-2] DISTRICT CHARGES ADDED @ 3.00 %.

Supplying of 9 mtr. Octagonal pole along with base plate foundation bolts & 4 way carriage ring (Section Length - 9000mm, thickness - 3mm, Base Plate - 260 mm x 260 mm x 16 mm). Vetted Analized Rate

Construction of base foundation for 9 mtr. Octagonal Pole. (Specification as per Civil Estimate & Drawing) Vetted Analized Rate

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 40 mm dia [PWD Schedule Page No-F-6 Iteam No-3.a] DISTRICT CHARGES ADDED @ 3.00 %.

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core. [PWD Schedule Page No-F-1 Iteam No-11c] DISTRICT CHARGES ADDED @ 3.00 %.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. [PWD Schedule Page No-F-2 Iteam No-1.a] DISTRICT CHARGES ADDED @ 3.00 %.

Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C. (UD & MA schedule P-7, I-38) NO DISTRICT CHARGES ADDED.

Supplying and fixing 240/415 V 6-32 Amp DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. [PWD Schedule Page No-D-6 Iteam No-7] DISTRICT CHARGES ADDED @ 3.00 %.

Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor having contact block of the following range 22-32Amp, 1NO/1NC. (UD & MA schedule P-16, I-18.d) NO DISTRICT CHARGES ADDED.

Supply and delivery of Electronic Timer suitable for 240/ 360/415V, 50 Hz of the following time (Second) range: 12.0 to 120.0 (UD & MA schedule P-19, I-31.b) NO DISTRICT CHARGES ADDED.

S & F 100 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light. Vetted Analized Rate.

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. [PWD Schedule Page No-C-3 Iteam No-20.a] DISTRICT CHARGES ADDED @ 3.00 %.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core 4 sqmm. [PWD Schedule Page No-F-4 Iteam No-7.a] DISTRICT CHARGES ADDED @ 3.00 %.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : (i) 2 core 4 sqmm cable. [PWD Schedule Page No-F-5 Iteam No-8.b] DISTRICT CHARGES ADDED @ 3.00 %.

Sub Total