PROVN OF TOILET BLOCK FOR STUDENT LIVING AND SPL REPAIR TO BLDG NO P-64 (GUARD ROOM GATE NO-02) AT HAWS GULMARG UNDER GE 969 EWS

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good distributed surfaces of walls, floors etc.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including PVC board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/exhaust fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, complete all as specified and as directed.

S&F Switch Socket combination 3 pin,5 and 15 Amp flush type, complete all as specified and directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F LED Lamp 7 W. Make: Havells cat No. LHLDEREEMK8X015/ Philips/ Bajaj/Crompton

S&F LED Lamp 15 W. Make: Havells cat No. LHLDEREEMK8X015/ Philips/ Bajaj/Crompton

S&F Distribution Board SPN 4 Way, Single door Complete all as specified and as directed by Engr In Charge

S&F Distribution Board SPN 8 Way, Single door Complete all as specified and as directed by Engr In Charge.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN-32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with , blades, frame and louvers, complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Comlpete all as specified and directed by Engineer-in-charge.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc.

Surface dressing n.exc 15 cm deep in soft/loose soil, complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils or hard/Dense soil, complete all as specified and as directed.

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed, complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out in any type of soil, complete all as specified and as directed.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate, complete all as specified and as directed.

Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

M&L Reinforcement cement concrete Type M-30 design mix (20mm graded crushed aggregate) as in footing, plinth band complete all as specified and as directed.

Formwork to sides of columns complete all as specified and as directed.

M&L Reinforcement cement concrete Type M-30 design mix (20mm graded crushed aggregate) as in , columns complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete.

M&L Reinforcement cement concrete Type M-30 design mix(20mm graded crushed aggregate) as in beams & lintels complete all as specified and as directed.

Precast cement concrete hollow block masonry exc.10 cm type 1:2:4 using 16mm aggregate in width and setting in mortar 1:4, complete all as specified and as directed.

Providing precast cement concrete hollow block 10cm thick type 1:2:4 using 16mm graded aggregate set in cement morter 1:4, complete all as specified and as directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:4, complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement mixing with integral water proofing compound. (WPC to be measured and paid separately)

M&L 15mm thick rendering on fair faces of brick work or conceret surface in CM 1 :6 finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only Liquid water proofing compound and make confirming to IS, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats white wash complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over , quality,cut to length, bent to shape required including cranking, bending and binding with mild steel wire( annealed ) not less than 0.9mm dia, complete all as specified and as directed.

All as per item No 39 before in here but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, complete all as specified and as directed.

Supply and fixing in opening, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, complete all as specified and directed.

Supply and fixing in the frame at site, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.

S & F 2nd class SW plain, solid, straight chowkat and frames wrought frame rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and as directed.

S/F 30mm thick 2nd class soft wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gange etc( without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-I section 8 clause 8.24(b) complete all as specified and as directed.

S & F 4 mm thick figured , pinhead type, in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and as directed.

Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring, complete all as specified and as directed.

M&L 50 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base of flooring.

M&L50 mm thick Cement concrete type C 2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection, complete all as specified and as directed.

M&L Hard core of broken stone or boulder of gauge exceeding 63mm but not exc 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M & L for Mat Finish(Non-Skid) coloured tiles straight edge, standard economic class-II a grade of size of each tile exc 0.06 sqm but n exc 0.11 sqm , thickness not less than 7 to 8 mm as in floor etc set joined in neat cement slurry and poined with coloured cement laid over and incl 15mm thick bedding layer in CM 1:6, complete all as specified and as directed.

S&F Glazed coloured ceremic tiles 450x350x7mm/450x350x7mm thick , in dado / skerting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

S & F PVC SWR Floor trap of 75 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement,cement concrete 1:2:4 B-1, complete all as specified and as directed.

S&F 15mm bore CP Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type, complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socked, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F PVC (SWR) bends of bore 75mm, complete all as specified and as directed.

S&F Aluminum, anodized, barrel tower bolts of extruded section and fixed of length 150mm

S&F Aluminum anodized sliding door bolt with hasp and staples (bolt type)and fixing clips alloy and fixed of length 200 mm.

S&F Aluminum anodized handles cast type of 100 mm, complete all as specified and as directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed.

S&F stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes but fancy type C.P. with long shank, complete all as specified and as directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 15mm bore dia of pipe, complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends any radius with providing acceess door, complete all as specified and as directed.

M&L for 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints laid in trenches or in floors, complete all as specified and as directed.

S&F FRP Rotex PUF insulation tank 1000 ltr capacity consists of outer layer of tank white in colour made up of virgin FRP, inner layer of tank white in colour made up of virgin LLDP/HDPE, in middle of both the layers polyurethane fome (PUF) of 75 mm thick, including inlet along with float valve, outlet, overflow provision and tank lid with a sutable locking system complete all as specified and directed.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor.

S&F,Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.

S&F, vitreous China ware wash hand basin with pedestal white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets all as spd as directed.

S&F 15mm bore pillar tap fancy type Chromium plated, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked ,complete all as specified & directed.

Supply & Fixed flushing cistern PVC, low level of capacity of 10 ltr, white, valveless syphonic action type complete with inlet ball valve float and handle or Push button type including brackets, and PVC connection( 15mm size with PTMT nuts of length 450mm complete) all as specified & directed.

S&F in repair Vitreous China Urinal, Full stall type coloured/white complete fixing with suitable fixing arrangements to wall with and including CP urinal spreader, CP domed waste coupling and waste pipe complete, all as directed.

S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms).

M & L Granite (of any type)18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M30 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M30/ SFRC cover, interconnecting pipes RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth all as per drawing No CESZ/TD-01/2015 Sht 1/3 to 3/3.

S&F LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 and below foundation, vent shaft, connection etc complete for 30 users, complete all as per manufacturer direction and as specified. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" on all sides. 2) Level the bed and foundation in PCC. 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.

M&L cement concrete 1:3:6 type C2 bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in Complete 150mm pipe all as specified and directed.

M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls/Floor, complete all as specified and as directed.

Material and Labour for 50 mm thick PCC (1:2:4) type B2 using 40mm graded stone aggregate as in floor, finishing the surfaces fair and even without using extra cement.

Machine pressed precast conctete interlocking paver block PU coated any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.

M&L for sand cushion under paving block including watering and consolidation.

M&L for providing, cement concrete 1:2:4 type B0,using 12.5 mm graded aggregate, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed as directed by Engr-in-Charge

M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed.

S & F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed.

M&L reinforced concrete pipes 450 mm bore, class NP3, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified.

M&L for concrete drain bed to drain pipe of 450 mm including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, using 40mm graded aggegate complete all as specified and as directed.

Uninstall hot water plant along with acessories from plinth and keep it with safety from rain and harsh weather condition at safe place away from plant house remove with safety from plant house with the help of crane/labour without any damage to the hot water plant. Note: If any damage occurs during the uninstallation of plant shall be paid and rectified by contractor.

Re install Hot water Plant along with Plinth construction of size +1.200M above GL and 0.5M covering outset of Hot water plant using brick masonary or rubble masonary & finished with 15mm thick plaster of cement mortar of 1:4 & installing safely with the help of crane/labour at site/loc specified by Engr-in-Charge Note : Accessories for Re-installation and testing and making good for Hot water plant will be provided by the contractor.

Dismantling plain or corrugated steel sheeting of any gauge/thickness including roof covering/Nanital Pattern.

Dismantling timber scantling 40 sqcm and over in section in any position as unframed work.

Dismantling of timber weather boarding any description fixed in any position with nails complete all as specified and as directed.

Taking down chowkat or frames with Shutters n exc 1.5 sqm each (wlo taking off shutter from the frames), complete all as specified and as directed.

Demolition of PCC Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing,chajas and similar suspended work, complete all as specified and as directed.

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately)

Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles,complete all as specified and as directed.

Taking down GI water tubing and connections and taken in to schedule of credit for 15mm bore all as directed

Supplying, laying Tubes 'Medium grade' galvanised , 20MM with all fitting;laid in trenches, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L Cutting GI 50MM pipe and inserting Tee 20mm Gl with suitable arrangement as specified and directed by Engr in Charge

S&F Gate Valve 20MM Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supplying, laying, jointing and testing XLPE insulated,armoured under ground heavy duty electric cable with stranded aluminium conductor, 1100 volts, grade nominal cross sectional area 10 sqmm 2 core laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and as directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable, complete all as specified and as directed.

Sub class 'B' common kiln burnt clay building bricks, old size 230mmx11 5mmx75mm, laid at right angle along the cable over sand cushioning, as cable protection, complete all as specified and as directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M & L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office,laid over and incl 15mm thick cement screed basein CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to achive mirror finish complete all as specified and as directed.

S&F 100mm Butt hinges, extruded Aluminum alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21

S&F extruded aluminium alloy handles,100mm fabricated type anodized

Taking down GI water tubing and connections and taken in to schedule of credit for 20mm bore complete all as specified and as directed.

Dismantling PVC water tanks, 1000 liters capacity & removing credit to contractor, complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as directed.

S&F PVC (SWR) bends 110mm bore

S&F 110mm PVC (SWR) junction single (single T) equal or unequal

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.

M&L 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified & directed.

S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed.

S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on ceiling, complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed.

M&L for two coat of synthetic enamal paint over a coat of pink primer including on surface of wood or wood based of any description , complete removal of snowcem/white wash etc, complete all as specified and as directed.

M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.

M&L painting old steel surfaces zinc (or galvanized) surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint incl preparation of surfaces, complete all as specified and as directed.

M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed.

M&L 2nd class soft wood Plain fillets exc 3 Sq.cm but n.exc 6 Sq cm , rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.

Note:- Schedule of credit Rs. 22,170.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS