e tender for Furnishing and Net Working works at Thiruvananthapuram

Front Office Grill Work With Door Fabricating, supplying and erecting truss for ground using medium GI pipe of the following size including welding, cutting to length, cost and conveyance of all materials and labour charges GI pipe (Truss) GI pipe (Purlin). bolted in built up sections trusses and framed work with M.S angle iron plates, truss strengthening , cutting, fabricating and hoisting with bolts, plates, washers, bitumen washer etc complete

Truss work in Office front Side Fabricating, supplying and erecting truss for using medium GI pipe of the following size frame built on 65 mm Die 1.5 mm Thickness GI hollow Section Main truss Section 100X50 X1.6nmm GI Rectangular Hollow Section Cross Purling 40X20X1.6 mm GI Hollow Section Structural Frame Fully Applied Epoxy Coating Finish including welding, cutting to length, cost and conveyance of all materials and labour charges GI pipe (Truss) GI pipe (Purling). bolted in built up Sections Trusses and framed work with M.S angle iron plates, Roof Sheet Sandwich Model 0.35 mm Thickness Powder Coated Finish all Materials Branded Like JSW or Other Equitant Brand cutting, fabricating and hoisting with bolts, plates, washers, bitumen washer etc….

Ramp Work Front Side Ramp Work using Cement and Metals size 900X900X300

Stair Side Open Place Closing This Building Using 6/8mm Thickness Cement Board Inside and outside partition of GI Pipe using Room Water Resistant, Weather Resistant, Termite Resistant, Eco- Friendly, Aesthetically Appealing Durable, Easy Workability, Energy Efficient, Value for Money, Asbestos Free , Sound Insulation, High Strength, Eco-Friendly Painting work cleaning the wall and painted with emulsion paint of approved quality & Colour two coats by roller /Sprayer after finishing Rate quoted Shall include all material labour Charges Cost of conveyance

Wooden Door and Frame New Wooden Door Using building Top open Side Door with Repairing Frame Work with Lock and fitting etc….

Cash Counter and Sale Area Aluminum Partition Some Old Aluminium Partition Using : consisting of Aluminium Sections 63.5 MM X 38.1 MM X 1.0 MM thick hollow anodized of Jindal / Hind Alco make conforming to IS733 and IS 1285. The anodizing shall be transparent and complying IS 1868 (minimum anodic coating of grade AC 15). The Sections would be installed at an interval of 3’6” vertically and bottom section of Aluminium snap beading for glazing/paneling etc. and 5 mm thick float Transparent Glass including providing screw less aluminium glazing clip. Bottom up to 3’ Ht Will be provided with 8 MM thick both side pre-laminated particle board flat pressed 3 layer conforming to IS12823 Grade I type II of of interior grade complete with fixing clips, fasteners, filling up of gaps at junction, top, bottom, & sides with required PVC/Neoprene felt etc.. The joints shall be smooth, mitred and jointed with cleat angle etc….

Staff Cabin Old Cabin Arrange and Cutting edge banding some Extra work for 3 Cabin

Bathroom Replace One Existing Closet Replace One existing Closet with including closet flush tank and fittings material change some tails and extra piping and floor cutting work and labour etc….

Urinal Toilet for Men Using Good Quality Urinal Closet for Men Toilet and Cutting Wall Work

Washbasin New Washbasin change install new washbasin with waste pipe and some Point clearing and bathroom gratings new white Cement using

Plumbing Work 3 Bathroom 3 Bath room Plumbing work Cutting Tails and old Pipe Some Removing install New Pipes and Waste water Pipe and Marco ware Stainless Steel Heavy Duty Health Faucet,1pc Gun and Pipe , Brushed Finish with tap Connecter new .Leakage Pipe and some Tap changing Tail cutting and finishing wastage pipe cleaning this Bathroom inside and outside work etc….

Concreting front Office Supply and make internal plastering 12 to 15 mm thickness at all heights in line, level, and plumb, Cement , Sand Ratio (as per Specification) on brick walls or block walls, Rates to include application on all types of surfaces, at all levels. Allow for Providing and fixing galvanized chicken mesh 300mm wide and 0.5mm thick and provide 12mm groove at junctions of brick and concrete members (if needed). Mesh to be properly stretched and nailed ensuring equal thickness of plaster on both sides of the mesh. Providing necessary plaster grooves as per design, etc. Note: Curing should be done in 7-10 days Works include all materials needed to finish the works according to specifications , drawings and supervisor engineer's instructions

Building Maintains Work Old Building maintains some Areas full clearing and cement and finishing

Painting work Painting work cleaning the wall and painted with emulsion paint of approved quality & Colour two coats by roller /Sprayer after finishing Rate quoted Shall include all material labour Charges Cost of conveyance etc…

Demolishing and old building to new building cost Old Building to new Building all materials and Furniture and metals Rack papers electrical items all Change new Building

SupplyofCat6UTPcable–(100%Solidbarecoppercable,ETLcertified,ULListed Product ) (One Box containing 305 Mtr)

Supply of Information out let – Cat 6 - IO to System

Supply of 3*3 surface mount box for Information Outlet

Supply of Cat 6 .5 mtr patch code for rack side

Supply of Cat 6 1 mtr patch code for IO to system

PVC Casing and Capping /conduits/flexible etc (Press feet (ISI Mark ) or any other ISI mark (25MM Casing/conduits)/Pipe

PVC Casing and Capping /conduits/flexible etc (Press feet (ISI Mark ) or any other ISI Mark (32 MM Casing/conduit)/Pipe

Laying Charges For Cat 5/6 Utp/Stp CableFixingandterminationofinformationoutletcat5/Cat6modularjackin Network With Surface Mount Box Electricity Work (Labour Charges ) All

Electrical Work Power Point Outlets Supply & Installation of 3 Nos of 6A Sockets controlled by 2 Nos 5 A Switches with front plate with enclosure and other accessories etc..(Mk /Roma/Crabtree) and wall light and Fan Switches including

Ceiling Light LED Tub Light Good Quality 2 Year Warranty

KSEB Main Control DB Three phase Consumer DB Main Switch to controlling Isolator Fixing 40 Amps 4 pole Isolator, 4 Pole Elcb Providing, Fixing, Testing and Commissioning all

EARTHING FOR UPS/EQUIPMENTS Providing plate earth electrode comprising of 600mmx600mmx3mm copper plate , 40mm GI pipe 2 nos of 25mm x 3mm copper flat along with pipe, copper clamp adequated quantity of charcoal and salt , necessary fasteners etc. the rate shall be included for excavation and refilling of the earth pit, construction of inspection chamber with 450mm x 450mm CI cover.

8 way UPS DB Three Phase, Phase Segrigated Distribution board with nuetral bar,earth bar,cables ties,top and bottom removable gland plate and with necessary adopter boxes if any.The DB should be lP 42 metallic double door with provisioin of MCB&ELCB etc as required including cuting of wall and plastering the same with neat finish.lt comprising as

a) 3Runs of 2.5sqmm copper wire in PVC conduit for circuit mains

b) 3Run of 2.5sqmm copper wire in PVC Conduit for Power points

c) 3Runs of 2.5 sqmm copper wire in PVC conduit for computer points

d) 2Runs of 4Sqmm copper wire+2.5 Sqmm copper wire in PVC conduit for Circuit wiring

e) 3Run 1.5 Sqmm Copper using light point and fan point

Wall Fan or Ceiling Fan