Bid Documents for Constructing Toilet Block at Various Area of Thangadh Nagarpalika, Dist.- Surendranagar.

Name Of Work :-

Dist.- Surendranagar

SUMMARY (SCHEDULE-B)

Sr. No Name of work Total Cost

Estimate For Constructing Toilet Block Near Jagdamba Sump Koli Society

at Thangadh Nagarpalika, Dist.- Surendranagar

Estimate For Constructing Toilet Block at Ambedkar Hall Thangadh

Nagarpalika, Dist.- Surendranagar

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges,

after deducting the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________% (should be writtern in figure and

below / above the estimated rates mentioned above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

1. All the work shall be carried out as per MOST specification and specification on the division or as directed.

2. Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

conditions, site moisture weather etc.

3. In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in

consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra payment

shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI laboratory

4. The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of work

and amount involved at site without any payment as directed by the Engineer in charge.

5. Testing of materials be as per statement attached with the Specifications, the materials shall be tested in G.E.R.I. Bill for testing shall be paid

by the CHIEF OFFICER and 1% of the (one percent) of amount put to tender after shall be recovered from the running account bills of the works.

(As per G.R. (R&B) Deptt., No. TNC/1085/4/C dtd. 20.12.91.

6. The contractor shall quote even "NIL" if no reduction is proposed.

7. One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of equipments

and conditions of service Act-1996)

8. Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

9. The contractor is solely responsible to bare all applicable taxes. IT. etc. and department will not entertain any contractor representation to

reimburse any financial burden due to applicable taxes : i.e. I.t etc.

Signature of contractor Chief Officer

Thangadh Municipality

THANGADH MUNICIPALITY

NAME OF Estimate For Constructing Toilet Block Near Jagdamba Sump Koli Society at Thangadh

WORK : Nagarpalika, Dist.- Surendranagar

SCHEDULE - "B1"

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item Estimated according to

Item Descrption Unit

No. but may be estimated

in Figure in Words

more or less quantities.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

1 4.55 materials and disposing off the excavated stuff 117.08 Cum

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

2 4.55 materials and disposing off the excavated stuff 149.67 Cum

upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

3 4.55 materials and disposing off the excavated stuff 256.12 Cum

upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(D) Soft rock not requiring

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness

6 0.00 including watering, ramming and consolidating 282.02 Cum

etc. complete. (upto 10 ton)

Providing and laying cement concrete 1:3:6 (1

Cement : 3- coarse sand :6- crushed stone

aggregate 40 mm. Nominal size) and curing

complete excluding cost of form work in :(a)

Foundation and plinth

(ii) Uncoursed Rubble Masonry with hard stone

of approved quality in foundations and plinth in

Cement Mortar 1:5 (1-cement : 5-coarse sand

including levelling up etc. complete (upto

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

Caps / Coping (upto 10 ton)

Providing laying Controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in :

RCC Lintels Ground Floor

Providing laying Controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in : RCC Slabs &

Landings Ground Floor

Providing laying controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in :

RCC Chhajja/Sill Ground Floor

Providing TMT Bar FE 500/500D reinforcement

for R.C.C. work including bending, binding, and

13 835.20 placing in position complete upto floor two level. 76.21 Kg.

White Stone Bela mesonry work in partition

14 10.72 walls upto 15 cm thickness in cement Mortar 1:4 458.81 Sqm

( 1- Cement : 4- course sand)

White Stone Bela mesonry block in course in

superstructure with stone of approved quality in

Lime Mortar 1:6 (1- Cement : 6- course sand)

including packing the joints etc. complete.

Providing 15 mm thick cement plaster in single

coat on fair side Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in & Extra over items for finishing

with a floating coat of neat cement slurry. (ii)

Cement mortar 1:4 ( 1 cement : 4 sand) Ground

Providing 10 mm thick cement plaster in single

coat on ceiling and soffit of stair for interior

plastering up to floor two level and finished even

and smooth in & Extra over items for finishing

with a floating coat of neat cement slurry for

plastering on ceiling and soffits of stairs up to

floor two level instead of plastering on walls. (ii)

Cement mortar 1:4 ( 1 cement : 4 sand) Ground

20 mm thick sand faced cement plaster on walls

upto height 10 meters above ground level

consisting of 12 mm thick backing coat of c.m.

18 101.33 1:3 (1:cement - 3:sand) and 8 mm thick finishing 326.11 Sqm

coat of c.m. 1:1 (1:cement - 1:sand) etc.

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

etc. complete. (upto 10 ton)

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3 coarse sand ) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete

for Ventilation

Applying two coats of Birla or Asian acrylic lapy

( putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

23 156.18 even shade including thoroughly brushing the 40.59 Sqm

surface free from mortar dropping and other

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

24 131.45 including throughly brushing the surface free 78.90 Sqm

from mortar droppings and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

25 24.73 including throughly brushing the surface free 84.16 Sqm

from mortar droppings and other foreign matter

and sand papered smooth. for ceiling and Soffit

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

26 101.33 thoroughly brushing the surface to remove all 114.53 Sqm

dirt, and remains of loose powdered

materials.etc complete

Providing laying and jointing in true line and

level 110mm diameter U.P.V.C. SWR type B

pipe conforming to IS 13592-1992 with one end

plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp

of the size 110mm dia. x 149 mm length x

mm high at every 2000 mm center to center or

shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

28 24.00 alround, square or round bars with round 101.17 Kg

headed bolts and nuts or by screws. (A) Plain

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt

and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

30 2.40 including cleaning the surface an even shade 87.81 Sqm

including cleanicn the surface of all dirt, dust

and other foreign matter.

Providing and fixing to wall, ceiling and floor

10.0 Kgf/cm2 working pressure polyethylene

pipes of the following outside dia. Low density,

31 10.00 complete with special flange compression type 189.20 Rmt

fittings wall clamps etc. including making good

the wall, ceiling and floor. (E) 50 mm.

Providing and fixing to wall, ceiling and floor

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube, fittings and

32 10.00 clamps included making good the wall, ceiling 246.57 Rmt

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and

level 25mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and

level 32mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing and fixing urinal approved quality

connecting the urinal with waste pipe, trap etc.

complete (A) White earthen ware flat back or

corner type size 430mm x 260mm x 350 mm

Providing and fixing PVC SWR Nahni Trap IS

14735 For Drain 100mm Diameter With jali of

the following nominal diameter of self cleansing

design with C.I. Scresd down or Hinged grating

including the cost of cutting and making.

Constructing brick masonry chamber for under

ground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light

duty) 455 mm. X 610 mm. Internal dimensions,

total weight of cover with frame to be not less

than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1

cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls & abed concrete etc.

complete (I) inside dimensions, 455 mm.

mm. And 450 mm. Deep for single pipe line

Providing and fixing in position cowl vent to

Providing and fixing to wall ceiling and floor

1.0kg. F/cm2 working pressure polythene pipes

of the following outside Dia. Low density,

40 10.00 complete with special falnge compression type 277.43 Rmt

fittings, wall clips etc. including making good the

wall ceiling and floor. (F)75mm

Providing and fixing screw down bib taps of

following size :

41 2.00 (A) Brass screw down bib tap polished bright (I) 186.83 Each

Providing and fixing Pillar Tap, capstan head,

screw down high pressure with screws, shanks

42 2.00 and back nuts 308.73 Each

Providing and fixing brass screw down stop

Providing and fixing chromium plated brass half

turn flush cock of approved quality including

44 4.00 fixing in pipe line etc. complete. 263.77 Each

(ii) 25 mm. Dia

Providing and fixing C.I. Manhole cover 0.60m x

45 2.00 0.45m size having weight not less than 35 kgs. 958.17 Each

Providing and fixing gun metal check or no

return fullway wheel valve

Providing and fixing gun metal check or no

return fullway wheel valve

Providing and fixing gun metal check or no

return fullway wheel valve

Providing erecting and fixing double coated

coated syntex PVC (ISI) water tank of required

49 1000.00 capacity each with all necessary fittings and 3.95 Lit

connection etc. complete on terrace.

Providing and fixing chromium plated, bottle trap

with necessary couplings of approved quality for

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing washbasin with single hole

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

53 2.00 the same but excluding fittings.(A) Vitreous 958.17 Each

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing FRP frame size 100x50 mm

and 28mm thick FRP depress panel shutter

having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame

is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith

54 6.00 embedded wooden pieces for stiffening & also 2377.76 Sqm

taking hinges & fintures. The whole FRP frame

& shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures &

fastenings & fastener sleeve.

Providing and fixing 35 mm thick shutters for

Doors, windows and clerestory windows

including Indian teak wood frames 12 cm x

55 4.20 cm. size including anodized alluminium fixtures 5533.68 Sqm

and fastenings including primer coat of

approved quality and two coats of oil painting

etc, complete. (ii) Fully Panelled.

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting the

cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

(should be writtern in figure and words)

below / above the estimated rates mentioned above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Thangadh Municipality

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

conditions, site moisture weather etc.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the

difference in consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However

no extra payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be

done in GERI laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

Testing of materials be as per statement attached with the Specifications, the materials shall be tested in G.E.R.I. Bill for testing shall be

5) paid by the CHIEF OFFICER and 1% of the (one percent) of amount put to tender after shall be recovered from the running account bills of

the works. (As per G.R. (R&B) Deptt., No. TNC/1085/4/C dtd. 20.12.91.

6) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of

7) the Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

8) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

The contractor is solely responsible to bare all applicable taxes. GST etc. and department will not entertain any contractor representation to

reimburse any financial burden due to applicable taxes : i.e. GST etc.

Signature of contractor Chief Officer

Thangadh Municipality

THANGADH MUNICIPALITY

NAME OF Estimate For Constructing Toilet Block at Ambedkar Hall Thangadh Nagarpalika, Dist.-

WORK : Surendranagar

SCHEDULE - "B1"

Quantities Estimated Rates Total Amount

Quantities Estimated Rates Total Amount

Item Estimated according to

Item Descrption Unit

No. but may be estimated

in Figure in Words

more or less quantities.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

1 3.85 materials and disposing off the excavated stuff 117.08 #NAME? Cum

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

2 3.85 materials and disposing off the excavated stuff 149.67 #NAME? Cum

upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

3 3.85 materials and disposing off the excavated stuff 256.12 #NAME? Cum

upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(D) Soft rock not requiring

Filling available excavated earth (excluding rock)

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness

6 0.00 including watering, ramming and consolidating 282.02 Cum

etc. complete. (upto 10 ton)

Providing and laying cement concrete 1:3:6 (1

Cement : 3- coarse sand :6- crushed stone

aggregate 40 mm. Nominal size) and curing

complete excluding cost of form work in :(a)

Foundation and plinth

(ii) Uncoursed Rubble Masonry with hard stone

of approved quality in foundations and plinth in

Cement Mortar 1:5 (1-cement : 5-coarse sand

including levelling up etc. complete (upto

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

Caps / Coping (upto 10 ton)

Providing laying Controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in :

RCC Lintels Ground Floor

Providing laying Controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in : RCC Slabs &

Landings Ground Floor

Providing laying controlled cement concrete M-

200 and curing complete including the cost of

form work and excluding cost of reinforcement

for reinforced concrete work in :

RCC Chhajja/Sill Ground Floor

Providing TMT Bar FE 500/500D reinforcement

for R.C.C. work including bending, binding, and

13 600.80 placing in position complete upto floor two level. 76.21 Kg.

White Stone Bela mesonry work in partition walls

14 7.56 upto 15 cm thickness in cement Mortar 1:4 ( 1- 458.81 Sqm

Cement : 4- course sand)

White Stone Bela mesonry block in course in

superstructure with stone of approved quality in

Lime Mortar 1:6 (1- Cement : 6- course sand)

including packing the joints etc. complete.

Providing 15 mm thick cement plaster in single

coat on fair side Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in & Extra over items for finishing

with a floating coat of neat cement slurry. (ii)

Cement mortar 1:4 ( 1 cement : 4 sand) Ground

Providing 10 mm thick cement plaster in single

coat on ceiling and soffit of stair for interior

plastering up to floor two level and finished even

and smooth in & Extra over items for finishing

with a floating coat of neat cement slurry for

plastering on ceiling and soffits of stairs up to

floor two level instead of plastering on walls. (ii)

Cement mortar 1:4 ( 1 cement : 4 sand) Ground

20 mm thick sand faced cement plaster on walls

upto height 10 meters above ground level

consisting of 12 mm thick backing coat of c.m.

18 79.80 1:3 (1:cement - 3:sand) and 8 mm thick finishing 326.11 Sqm

coat of c.m. 1:1 (1:cement - 1:sand) etc.

Providing and laying polished kota stone slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

etc. complete. (upto 10 ton)

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in flooring treads of steps and

landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3 coarse sand ) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm

thick , 24'' x 24'' in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete

for Ventilation

Applying two coats of Birla or Asian acrylic lapy

( putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

23 147.15 even shade including thoroughly brushing the 40.59 Sqm

surface free from mortar dropping and other

foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

24 133.14 including throughly brushing the surface free 78.90 Sqm

from mortar droppings and other foreign matter

and sand papered smooth.

Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

25 14.01 including throughly brushing the surface free 84.16 Sqm

from mortar droppings and other foreign matter

and sand papered smooth. for ceiling and Soffit

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

26 79.80 thoroughly brushing the surface to remove all 114.53 Sqm

dirt, and remains of loose powdered

materials.etc complete

Providing laying and jointing in true line and level

110mm diameter U.P.V.C. SWR type B pipe

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering, & fitting

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the

size 110mm dia. x 149 mm length x 145 mm high

at every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

alround, square or round bars with round headed

bolts and nuts or by screws. (A) Plain Grill.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt

and other foreign matter and scoured with

brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

30 1.80 including cleaning the surface an even shade 87.81 Sqm

including cleanicn the surface of all dirt, dust and

other foreign matter.

Providing and fixing to wall, ceiling and floor

Kgf/cm2 working pressure polyethylene pipes of

the following outside dia. Low density, complete

31 10.00 with special flange compression type fittings wall 189.20 Rmt

clamps etc. including making good the wall,

ceiling and floor. (E) 50 mm.

Providing and fixing to wall, ceiling and floor

galvanised mild steel tubes (Medium grade) of

the following nominal bore, tube, fittings and

32 8.00 clamps included making good the wall, ceiling 246.57 Rmt

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level

32mm dia. U.P.V.C. pipe (SCH-40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equuivalent

as approved by Engineer in charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all

Providing and fixing urinal approved quality

connecting the urinal with waste pipe, trap etc.

complete (A) White earthen ware flat back or

corner type size 430mm x 260mm x 350 mm

Providing and fixing PVC SWR Nahni Trap IS

14735 For Drain 100mm Diameter With jali of

the following nominal diameter of self cleansing

design with C.I. Scresd down or Hinged grating

including the cost of cutting and making.

Constructing brick masonry chamber for under

ground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light

duty) 455 mm. X 610 mm. Internal dimensions,

total weight of cover with frame to be not less

than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1

cement : 2 coarse sand : 4 graded stone

aggregate 20 mm. size ) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls & abed concrete etc.

complete (I) inside dimensions, 455 mm.

mm. And 450 mm. Deep for single pipe line

Providing and fixing in position cowl vent to

Providing and fixing to wall ceiling and floor

1.0kg. F/cm2 working pressure polythene pipes

of the following outside Dia. Low density,

40 8.00 complete with special falnge compression type 277.43 Rmt

fittings, wall clips etc. including making good the

wall ceiling and floor. (F)75mm

Providing and fixing screw down bib taps of

following size :

41 2.00 (A) Brass screw down bib tap polished bright (I) 186.83 Each

Providing and fixing Pillar Tap, capstan head,

screw down high pressure with screws, shanks

42 2.00 and back nuts 308.73 Each

Providing and fixing brass screw down stop

Providing and fixing chromium plated brass half

turn flush cock of approved quality including

44 2.00 fixing in pipe line etc. complete. 263.77 Each

(ii) 25 mm. Dia

Providing and fixing C.I. Manhole cover 0.60m x

45 2.00 0.45m size having weight not less than 35 kgs. 958.17 Each

Providing and fixing gun metal check or no

return fullway wheel valve

Providing and fixing gun metal check or no

return fullway wheel valve

Providing and fixing gun metal check or no

return fullway wheel valve

Providing erecting and fixing double coated

coated syntex PVC (ISI) water tank of required

49 1000.00 capacity each with all necessary fittings and 3.95 Lit

connection etc. complete on terrace.

Providing and fixing chromium plated, bottle trap

with necessary couplings of approved quality for

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing washbasin with single hole

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

53 2.00 the same but excluding fittings.(A) Vitreous 958.17 Each

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Providing and fixing FRP frame size 100x50 mm

and 28mm thick FRP depress panel shutter

having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame

is to be filed up with injected fire retardant grade

polyurethene foam done in situ alongwith

54 6.00 embedded wooden pieces for stiffening & also 2377.76 Sqm

taking hinges & fintures. The whole FRP frame &

shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures &

fastenings & fastener sleeve.

Providing and fixing 35 mm thick shutters for

Doors, windows and clerestory windows

including Indian teak wood frames 12 cm x 7 cm.

55 4.20 size including anodized alluminium fixtures and 5533.68 Sqm

fastenings including primer coat of approved

quality and two coats of oil painting etc,

complete. (ii) Fully Panelled.

One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges, after deducting the

cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s bill.

I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%

(should be writtern in figure and words)

below / above the estimated rates mentioned above amount of my / our tender works out as under :-

Estimated amount put to tender : Estimated amount put to tender :

Thangadh Municipality

1) All the work shall be carried out as per MOST specification and specification on the division or as directed.

Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all

conditions, site moisture weather etc.

In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference

in consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra

payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI

laboratory only.

The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of

work and amount involved at site without any payment as directed by the Engineer in charge.

Testing of materials be as per statement attached with the Specifications, the materials shall be tested in G.E.R.I. Bill for testing shall be paid

5) by the CHIEF OFFICER and 1% of the (one percent) of amount put to tender after shall be recovered from the running account bills of the

works. (As per G.R. (R&B) Deptt., No. TNC/1085/4/C dtd. 20.12.91.

6) The contractor shall quote even "NIL" if no reduction is proposed.

One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the

7) Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of

equipments and conditions of service Act-1996)

8) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.

The contractor is solely responsible to bare all applicable taxes. GST etc. and department will not entertain any contractor representation to

reimburse any financial burden due to applicable taxes : i.e. GST etc.

Signature of contractor Chief Officer

Thangadh Municipality