KIIFB-CMI-MRBC-Providing Community Micro Irrigation on the Ayacut of Extension of Moolathara Right Bank canal from Korayar to Varatayar- Zone-I-General Civil Work

Work Name:KIIFB-CMI-MRBC-Providing Community Micro Irrigation on the Ayacut of Extension of Moolathara Right Bank canal from Korayar to Varatayar- Zone-I-General Civil Work

牥業慮楴湯眠瑩⁨牢獡⁳潣灭敲獳潩汧湡⁤湡⁤污浵湩畩畬獧映牯ഠ昊汯潬楷杮猠穩⁥景倠䍖椠獮汵瑡摥愠摮倠䍖猠敨瑡敨⁤ 䱘䕐愠畬業楮浵挠湯畤瑣牯挠扡敬漠⁦⸱‱噋ഠ朊慲敤愠⁳敲畱物摥㐮堠ㄠ‰煳‮浭⠠㔲浭휩⸵㌱债潲楶楤杮愠摮氠祡湩⁧慥瑲⁨潣湮捥楴湯映潲慥瑲⁨汥捥牴摯⁥楷桴㐠〮‰浭搠慩挠灯数⁲楷敲椠㔱浭搠慩䜠䤮‮楰数映潲慥瑲⁨汥捥牴摯⁥湩汣摵湩⁧潣湮捥楴湯眠瑩⁨潣灰牥琠楨扭敬攠捸癡瑡潩湡⁤敲昭汩楬杮愠⁳敲畱物摥洮⸵㐱债潲楶楤杮愠摮映硩湩⁧㔲洠⁘‵浭挠灯数⁲瑳楲⁰湯猠牵慦散漠⁲湩爠捥獥⁳潦⁲潣湮捥楴湯⁳瑥⹣愠⁳敲畱物摥괮⸵㤱债潲楶楤杮愠摮映硩湩⁧⸴〰洠楤⁡潣灰牥眠物⁥湯猠牵慦散漠⁲湩爠捥獥⁳潦⁲潬灯攠牡桴湩⁧污湯⁧楷桴攠楸瑳湩⁧畳晲捡⽥爠捥獥敳⁤潣摮極⽴猠扵慭湩眠物湩⽧挠扡敬愠⁳敲畱物摥̮
⸱㈱场物湩⁧潦⁲楬桧⽴瀠睯牥瀠畬⁧楷桴㈠㑘猠⹱洠剆卌倠䍖椠獮汵瑡摥挠灯数⁲潣摮捵潴⁲楳杮敬挠牯⁥慣汢⁥湩猠牵慦散 敲散獳摥洠摥畩汣獡⁳噐⁃潣摮極⁴污湯⁧楷桴ㄠ丠‴煳‮浭䘠䱒⁓噐⁃湩畳慬整⁤潣灰牥挠湯畤瑣牯猠湩汧⁥潣敲挠扡敬映牯氠潯⁰慥瑲楨杮愠⁳敲畱物摥䔮
〹ㄮ⸲⸷〴区灵汰ⱹ氠祡湩⁧湡⁤汣浡楰杮漠⁦‱潮‮噐⁃湩畳慬整⁤湡⁤噐⁃桳慥桴摥愠浲畯敲⁤污浵湩畩潰敷⁲慣汢ⱥㄠㄮ䬠⁖牧摡⁥景琠敨映汯潬楷杮猠穩獥甠楳杮挠慬灭⁳潮整⁤污湯⁧楷桴琠敨挠扡敬ⱳ猠慰楣杮漠⁦汣浡獰渠瑯攠捸敥楤杮㘠挰獭‬慭楫杮朠潯⁤桴⁥慤慭敧⁳‬潣潬牵眠獡楨杮攠捴‮獡爠煥極敲⹤‴潣敲ㄠ‰煳洠楷桴映捡潴祲洠摡⁥汣浡镰〹ㄮ⸶⸵㨶畓灰祬漠⁦畳数楲牯焠慵楬祴挠灯数⁲慥瑲⁨潳正瑥映牯琠敨映汯潬楷杮猠穩⁥景攠牡桴挠湯畤瑣牯椠据畬楤杮挠楲灭湩⁧瑥⹣愠⁳敲畱物摥㘮‮浭⠠㐠匠䝗鬩
〹㌮ㄮ⸹㨳畓灰祬挠湯敶慹据ⱥ椠獮慴汬瑡潩Ɱ琠獥楴杮愠摮挠浯業獳潩楮杮琠敨氠杩瑨映瑩楴杮⁳景映汯潬楷杮琠灹獥洠摡⁥牦浯䌠䍒⁁桳敥⁴⸰洵桴捩湫獥⁳楷桴愠汬愠捣獥潳楲獥愠摮†慬灭⁳楤敲瑣祬漠慷汬愠摮朠癩湩⁧潣湮捥楴湯⁳楷桴ㄠ⼶⸰〲洠″潣敲倠䍖椠獮汵瑡摥愠摮猠敨瑡敨⁤潲湵⁤潣灰牥†潣摮捵潴⁲汦硥眠物⁥牯攠瑸湥楤杮琠敨漠楲楧慮楷楲杮愠摮朠癩湩⁧潣湮捥楴湯⁳獡爠煥極敲ㅤ〲‰浭ㄠ㉘地䰠䑅䰠浡⁰楷桴戠硯琠灹⁥楦瑸牵ݥ
⸲〱ㄮ区灵汰楹杮愠摮映硩湩⁧䄵琠㈳䄠爠瑡湩Ⱨ㈠〴㐯㔱瘠汯獴‬〱欠ⱁ∠䌢∢挠牵敶‬業楮瑡牵൥挊物畣瑩戠敲歡牥猠極慴汢⁥潦⁲湩畤瑣癩⁥潬摡漠⁦潦汬睯湩⁧潰敬⁳湩琠敨攠楸瑳湩⁧䍍ൂ䐊⁂潣灭敬整眠瑩⁨潣湮捥楴湯ⱳ琠獥楴杮愠摮挠浯業獳潩楮杮攠捴‮獡爠煥極敲⹤਍楓杮敬瀠汯⸹⸱〳区灵汰楹杮愠摮洠歡湩⁧湥⁤整浲湩瑡潩楷桴戠慲獳挠浯牰獥楳湯朠慬摮愠摮愠畬業楮浵氠杵⁳潦⁲਍潦汬睯湩⁧楳敺漠⁦噐⁃湩畳慬整⁤湡⁤噐⁃桳慥桴摥⼠堠偌⁅污浵湩畩潣摮捵潴⁲慣汢⁥景ㄠㄮ䬠⁖਍牧摡⁥獡爠煥極敲⹤″⼱堲㌠〰猠⹱洠㜨洰⥭Ĭ㤀⸰㈱㜮㠮区灵汰ⱹ氠祡湩⁧湡⁤汣浡楰杮漠⁦‱潮‮噐⁃湩畳慬整⁤湡⁤噐⁃桳慥桴摥愠浲畯敲⁤污浵湩畩潰敷⁲慣汢ⱥㄠㄮ䬠⁖牧摡⁥景琠敨映汯潬楷杮猠穩獥甠楳杮挠慬灭⁳潮整⁤污湯⁧楷桴琠敨挠扡敬ⱳ猠慰楣杮漠⁦汣浡獰渠瑯攠捸敥楤杮㘠挰獭‬慭楫杮朠潯⁤桴⁥慤慭敧⁳‬潣潬牵眠獡楨杮攠捴‮獡爠煥極敲⹤′潣敲㜠‰煳洠⥭䑏㐳ㄳ⼳〲㔲㈭㈰㨶卋䉅䌠乏䕎呃佉⁎䡃剁䕇ｓ䑏㐳ㄳ⼴〲㔲㈭㈰㨶䑏〲〴⼶〲㌲㈭㈰‴‭畳灰祬਍湡⁤慬楹杮漠⁦㐲‰煳浭㐠挠牯⁥噐⽃䱘䕐椠獮汵瑡摥愠浲畯敲।慣汢॥楷桴愠畬業楮浵挠湯畤瑣牯⁳潦⁲潷歲湩⁧潶瑬条獥甠⁰潴愠摮椠据畬楤杮ㄠ〱‰潶瑬⁳潣普牯業杮䤠⁓㔱㐸瀯牡⁴⽉㤱㠸映牯倠䍖䤠⁓〷㠹瀠牡⁴⁉潦൲堊偌൅ഊ
䑏㐳ㄳ⼵〲㔲㈭㈰㨶䑏〲〴⼵〲㌲㈭㈰‴ⴠ਍畓灰祬愠摮氠祡湩⁧景ㄠ㔸猠浱⸳‵潣敲倠䍖堯偌⁅湩畳慬整⁤牡潭牵摥挠扡敬眠瑩⁨污浵湩畩潣摮捵潴獲映牯眠牯楫杮瘠汯慴敧⁳灵琠湡⁤湩汣摵湩⁧ㄱ〰瘠汯獴挠湯潦浲湩⁧卉ㄠ㠵⼴慰瑲䤠ㄯ㠹‸潦⁲噐⁃卉㜠㤰‸慰瑲䤠映牯਍䱘䕐਍þ伀㍄㌴㘱㈯㈰ⴵ〲㘲伺㉄㐰㐰㈯㈰ⴳ〲㐲†ഭ匊灵汰⁹湡⁤慬楹杮漠⁦⸲‵煳浭㌠挠牯⁥噐⽃䱘䕐椠獮汵瑡摥愠浲畯敲⁤慣汢⁥楷桴愠畬業楮浵挠湯畤瑣牯⁳潦⁲潷歲湩⁧潶瑬条獥甠⁰潴愠摮椠据畬楤杮ㄠ

00 volts conforming IS 1584/part I/1988 for PVC IS 7098 part I for XLPE n
OD34317/2025-2026:4.1.6 - Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting s u s p e n d e r s e t c a s required.450 mm width X50 mm depth X 2.0 mm thickness ÁOD34318/2025-2026:Supply and fixing following capacity TP & N disconnector fuse switch unit with sheet steel enclosure directly on wall using suitable anchor bolts as required- 160A TPN SFUòOD34319/2025-2026:METERING PANEL : Supply, installation,testing and commissioning of meteing panel eather proof water resistant material and panel fabricated with 16SWG CRCA sheet , CT unit, PT unit, NCT included( excluding HT TOD meter) ªOD34320/2025-2026:OD20413/2023-2024 - APFC(Automatic power f a c t o r c o n t r o l panel):Supplying, Installation, T e s t i n g & a m p ; Commissioning of floor mounted supported compartmentalized indoor type dust, weather and vermin proof cubical 150KVAr , (1 x 50KVAR + 1 x 20 KVAR + 2 x 15 KVAR + 4 x 10 KVAR + 1 x 5 KVAR)APFCR panel i/c capacitor, contactor,relay of suitable capacity, fabricated out of 2 mm thick CRCA Sheet Steel of suiatble size depth not less than 400mm with hinged door and suitable for continous operation on 3 Phase 415 V, 50 Hz, 4 wire AC supply with detachable gland plate in cable alley including providing and fixing following switchgears and accessories therein c o n n e c t i o n s a n d interconnections with PVC insulated multi strand copper flexible conductor duly sleeved, tag, lugs etc and painted with powder coated paint after eight tank treatment, earthing the body etc. as required. ¹
OD34321/2025-2026:M S B ( m a i n s w i t c h board):Supply,installation,test ing and commissiong of MSB panel fabricated out of 16SWG CRCA sheet ,powder coated dust and vermin tight proof,front opening type, cable top/ bottom entry type,flush , floor mounted and also including base frame (incomer:630A 36KA 4pole MCCB-1 nos, outgoing:250A 23KA 4pole MCCB-4 nos , 63A 4 pole MCCB-1 nos and also include suitable aluminium bus bar dimension)
OD34322/2025-2026:Earthing with G.I. earth plate 1200 mm X 1200 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. µ
OD34323/2025-2026:Supply , installing and commisioning of outdoor 11KV/433V 315KVA transformer with DP structure also including primary side control and protection (A.b switch, lightning arrester, D.o fuse) and secondary control and protection (MCCB having isolation duty and E/F release and stand by low set E/f relay using CT at neutral earthing conductor or ACB with propoer current setting facility with 3 O/C and 1 E/f realease üOD34324/2025-2026:Supply, conveyane, installation, testing and commissioning of 3phase 45KW submersible motor pump set having having dischagrge of 150 m3 /hr at 100metre head (KSB ETN 080-065250 GGSCP1CGC303702B) including all necessary accessories6OD34325/2025-2026:202 Providing fixing 80mm foot valveiOD34326/2025-2026:Providing and fixing 65mm 'B'class GI pipe with GI fittings and clamps as required. hOD34328/2025-2026:Providing and fixing 80mm 'B'class GI pipe with GI fittings and clamps as required. •
OD34329/2025-2026:Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using 2mm. CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be od183595/202 0_2021 : used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly, comprising with the followings as per the KEI standard. Switch gears  ABB, L&T/Equivalent. Incomer: 160-400A range, 4P, 36KA, microprocessor based MCCB with inbuilt earth fault relay, Bus bar: 200A TPN bus bar.phase indication lamps controlled with slide lock fuse-1set, multifuction meters with CTs-1no. Bus bar: 200A TPN bus bar. Outgoings:200A, 4P TPN SDF with HRC fuse - 3nos. with 3base 2key castle key interlock, 32A TPN SDF with HRC fuse-1no., 3nos. fully automatic star delta starter for 50HP motors, 3nos. 12.5Kvar power capacitors. Accessories: phase indication lamps controlled with SPMCBs-3sets, multifuction meters with CTs-3nos. LOD34330/2025-2026:100 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.BOD34331/2025-2026:250A HRC fuse fuse base with fuse link<br>
OD34333/2025-2026:Supply & installation of dust and vermin proof, 3 Phase Syn

and cantileversï2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc completeÎ5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or morekilogram)
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)#
50.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc completeÊ
5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources)[email protected]:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand)[email protected]:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqmy10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover<10.7:Providing and fixing ball bearing for rolling shutters.noV
10.13.2:Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee- sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately)kgá9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by weldingÖ10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.