Construction of 6 nos E type Quarter building for Paramedical staff at Talpatia PHC of Jharsuguda block in the District of Jharsuguda.

Earth work in excavation of foundation in hard soil with all leads and lifts including dressing and levelling the bed and depositing the excavated materials at places away from site with all leads including cost of labour and T&P required for the work etc complete as per the direction of the Engineer-in-Charge.

Filling in foundation and plinth with excavated earth including watering and ramming as directed by the Engineer-in-charge.

Filling in foundation and plinth with sand well watered and rammed including quarrying,collecting, conveying, supplying of approved quality of dust free coarse sand from approved quarry including cost, conveyance, royalties and taxes of materials and labour and T&P required for the work as directed by the Engineer-in-Charge.

Cement concrete 1:3:6 using 4cm size BHG C.B. metal including cost conveyance royalaties Taxces of all materials etc complete as per direction by the Engineer-in-Charge.

Brick work with Fly Ash Bricks masonary in cement mortar (1:6) using the bricks having crushing strength not less than 75 Kg/cm2 with dimensional tolerance plus minus 8% after immersing the bricks for six hours in water before use in Foundation & Plinth including hoisting placing in position, scaffloding splays cutting, circular moulding, corbelling, champering and similar such type of works watering and curing etc including cost, conveyance, royalties and taxes of all materials and cost of all labour and T&P required for the work etc complete as per the direction of the Engineer-in-Charge.

Gound Floor

Brick work with Fly Ash Bricks masonary in cement mortar (1:6) using the bricks having crushing strength not less than 75 Kg/cm2 with dimensional tolerance plus minus 8% after immersing the bricks for six hours in water before use in Super Structure including hoisting placing in position, scaffloding splays cutting, circular moulding, corbelling, champering and similar such type of works watering and curing etc including cost, conveyance, royalties and taxes of all materials and cost of all labour and T&P required for the work etc complete as per the direction of the Engineer-in-Charge.

Gound Floor

First Floor

Second Floor

Third floor

Reinforced Cement Concrete M25 using 20mm & down graded size BHG chips including cost, conveyance, royalities taxes of all materials etc complete as per direction by the Engineer-in-Charge.Column Base and Footing

Plinth Beam

Column GF

Column FF

Column SF

Column TF

Lintel GF

Lintel FF

Lintel SF

Lintel TF

Chhaja GF

Chhaja FF

ChhajaSF

ChhajaTF

Wall Beam GF

Wall Beam FF

Wall Beam SF

Wall Beam TF

Roof Slab GF

Roof Slab FF

Roof Slab SF

Roof Slab TF

Staircase

Staircase FF

Staircase SF

Providing TMT Fe-500 reinforcement bars for RCC work of rquired diameter of apporved quallity including cutting, bending, binding and tying the grills and placing in position including cost, covenyance and royalty of all materials and cost of all labour etc. complete as per direction of the Engineer-in-Charge.

First Floor

Second Floor

Third floor

20mm thick grading plaster in CM (1:4) over roof slab and cleaning the surface by wire brishing laid to proper slope finished smooth including watering and curing with cost, conveyance of materials labour, T & P required for the work including royalty etc complete as per direction of the Engineer-in-Charge.(second floor)

Third floor

16mm thick cement plaster (1:6) in finished smooth surface brick walls after raking out joints including watering, curing complete with cost, conveyance, royalties and taxes of all materials and cost of all labour, T&P required for the work etc complete as directed by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

12mm (1/2') thick cement plaster (1:6) in finished smooth to out side smooth surface of bricks walls after racking out joints including watering and curing etc complete with cost, conveynace royalties all taxes and cost of all materials and cost of all labour as per the direction by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

6 mm thick cement plaster (1:4) finished smooth RCC surface after racking out joints including watering and curing etc complete with cost, conveynace royalties all taxes and cost of all materials and cost of all labour as per the direction by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

Supplying fitting and fixing steel Angle Iron door, Iron wndow, Grill as per approved design and drawing including all cost of materiaals and labour etc complete as per direction by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

Providing & Fixing vitrified tiles of size (600x600) in floor, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.

First Floor

Second Floor

Fixing vitrified tiles of size (600x600) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.

First Floor

Second Floor

Providing & Fixing Kadoppa tiles above 0.40 sqm (10mm thick)in shelves on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of preca

First Floor

Second Floor

Providing & Fixing ceramic tiles of size (300x300) in dado skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles.

Fixing granite tiles of 20mm thick in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of granite tiles.

First Floor

Second Floor

Fixing Chequered tiles of 20mm thick in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of granite tiles.

First Floor

Second Floor

Dressed seasoned sal wood work framed and fixed (W & P) in trusses purlins frame of doors, windows and door etc. Data for 0.028 Cum

First Floor

Second Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

First Floor

Second Floor

Providing & applying of two coats of Enamel paint with any approved quality to the wood/MS door & window etc. including cost of paint etc complete as per direction by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

Providing & applying of Primer one coat with any approved wall primer including cost of primer etc complete as per direction by the Engineer-in-Charge.

First Floor

Second Floor

Third floor

Supplying, fitting & fixing of window (siding type made up alminum section 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge.(First Floor)

Second Floor

Distempering two coats to walls with distemper of approved shade on old work to give an even shade exculding cost of distemper etc. complete as per the direction of Engineer-in-Charge.

First Floor

Second Floor

Third floor

Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

First Floor

Second Floor

Third floor

Weather coat painting two coats with 100% Acrylic emulsion paint (1st. quality) exterior grade over a coat of water bond cement primer of approved make & shade manufactured by reputed manufacturer like (NEROLAC/ASIAN/ BERGER/ DULOX) or equivalent to make including cost and conveyance of all materials to site, and all labour charges complete as per direction of the Engineer-in-Charge.

First Floor

Second Floor

Third floor

Providing CC 1:2:4 using 20mm & down graded size BHG chips including cost, conveyance, royalities taxes of all materials etc complete as per direction by the Engineer-in-Charge.

Providing CC 1:2:4 using 20mm & down graded size BHG chips including cost, conveyance, royalities taxes of all materials etc complete as per direction by the Engineer-in-Charge.

Supplying, fitting & fixing of window (siding type made up alminum section 151-154,151-155, as windows frame section No.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P etc complete as per direction of Enginner -in charge.

Dismantling brick or stone masonry in lime or cement mortar under 3M height including stacking the useful materials for reuse and removing the debris within 50M lead per 1 Cum

Dismantling and removing RCC columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50M lead.

EI Works

Recessed wiring to light point/fan point/exhaust pont/call bell pont with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2)

-do- (Gr.B) (1.1.2-1.24.2)

-do- (Gr.C) (1.1.3-1.24.2)

S/F of M.S. Box for 2 Module 18 swg

S/F of M.S. Box for 4 Module 18 swg

S/F of M.S. Box for 6 Module 18 swg

S/F of M.S. Box for 8 Module 18 swg

S/F of M.S. Box for 12 Module 18 swg

S/F of 3 pin 5/6 A.F.T switch and.Socket on existing board (Modular type) (1.25.1+1.25.4)

S/Fof 6 module M.S. Box with Bakelite cover (Modular Type) on surface or in recess including providing and fixing of 2 nos 3 pin 5/6 amp. Socket out let 5/6amp. Piano type modular switch,connection,painting etc. as required (1.24.4 +2 x (1.25.1+1.25.4)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5)

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required(1.24.2+1.25.5+1.25.5) for Invertor Connection.

Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20 mm dia non metallic heacy duty flexible conduit 1.6 mm in recessed PVC conduit as required (make of wire-Polycab/Finolex/L&T/Anchor/Havels/V-Guard/KEI/Great White).2x1.5 sqmm + 1 x 1.5 sqmm( 1 .8.1)

-do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2)

-do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3)

-do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.3)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Anchor or Equivalent)

S/F of 15A Socket on 2 module for AC

S/F of 5 to 32 Amp rating 240 Volt "B" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1)

S/F of MCB 8 Way Double Door (2.3.6)

S/F of 32 Amp rating C Series DP MCB (Make:L&T/Havells/C&S/Equivalent)

S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 )

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28)

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2 +3.3)

Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17)

S/F of Fan hook S, Type on ceiling.

S/F of step type modular fan regulator

S/F of 12 Watt. LED bulb(Make:Havells/Polycab or Equivalent)

Supply, Installation, Testing and commissionioning of 300mm sweep exhaust fan in the existing opening, including making the hole to suit the size of the above fan making good the damaged comlete, connection,etc. as required.(1.43)(Make: usha/polycab/crompton/havells/anchor/orient)

S/F fo 1200mm A.C.Cilling fan(1 star) without regulator including all conections (Model: Usha (Striker NEO HS)/Polycab Vital HS/ Crompton (hs)/ havells samrat ES/Orient (Blitz)/ Anchor-Turbo Speed)/great white (Aldous)

S/F of 18-25W LED Tubelight fillting with all accessories and connection (Make : Crompton / HPL / Havells / Polycab / PAC

Supply & Fixing of 60 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)

S/F of 10W LED Bulk Head(Make -Havells/Crompton or Equivalent)

PH Work

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.Ground Floor

First Floor

Second Floor

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.Ground Floor

First Floor

Second Floor

Supplying all materials labour T & P and fitting and fixingfactory made FRP door shutter and frame as per ISI mark including metal fittings such as tower bolts, aldrops, handles, butthinges etc. ls for fixing the frameand making it good including conveyance of all materials to work site payment of royality taxes etc. complete inall respect as per specification and direction of the E.I.C. Frame:-

Shuitter

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. 110mm diameter U-PVC SWR pipes

110mm U-PVC P-trap

110mm U-PVC SWR Double junction door

110mm dia PVC SWR Nahani trap without Jally

110mm U-PVC SWR door bend

110mm U-PVC SWR Offset

110mm U-PVC SWR plain bend

110mm U-PVC SWR vent cowl

Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.10 lit PVC L/L Cistern

Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.550mmx400mm W.H.basin

Supplying all materials, labour T & P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plugs with C.P. screws and washers complete as per P.H. specification and direction of E.I.C. 600mmx450mm Mirror

Supplying all materials, labour T & P and fixing standard size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.125x600)mm size glass-shelf with C.PGuard rail

Supplying all materials, labour T & P and fixing standard size C.P. towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. screws as per P.H. specification and direction of E.I.C.20mmx600mm long C.P. towel rail

Supplying all materials, labour T & P and fixing standard size C.P. soap holder complete with C.P. Brass brackets fixed to wooden plug with C.P. screws as per P.H. specification and direction of E.I.C.C. P. Soap holder

Supplying all materials, labour, T&P and fixing wash laboratory sink with MS brackets painted white including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.stainless steel kitchen sink

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Nycer/Cera/Hindware/Parryware)

Supplying all materials, labour, T & P providing and fixing to wall or ceiling and floor PVC pipe conforming to ASTM-D-1785/89 (sch-80) and pipe fitting of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C.20mm dia PVC pipe((Sh-80)(Internal)

25mm dia PVC pipe((Sh-80)(External))

32mm dia HDPE Pipe(External))

Supplying all materials, labour, T & P and fitting & brass/C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and direction of E.I.C.15mm dia CP Bib Cock(Short Body)(Jaquar Fittings)

15mm dia CP Bib Cock(Long body) (Jaquar Fittings)

15mm dia CP Angle Stop Cock(Jaquar Fittings)

15 mm dia CP Pillar Cock (Jaquar Fittings)

15mm dia CP concealed stop cock (Jaquar Fittings)

CP shower arm with arm

15mm dia C.P. Flange

115 mm C.P Extension piece 50 mm long

125mm dia C.P. Grating

25mm dia PVC fullway valve

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of First floor

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.1000 lits capacity on the roof of First floor

Supplying all materials labour T & P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1½:3) using 12mm size h.g. chips, foundation concrete (1:3:6) using 40mm size h.g. metal on bed and around trap, K.B. Brick in c.m. (1:6) in F & P and inside 12mm thick c.p. (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I. gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C.Inside size 250mm x 250mm

Supplying all materials labour T & P and constructing inspection chamber of the following sizes with C.C. (1:36) using 40mm size h.g. metal on bed, 1st class K.B. Brick work in C.M. (1:6) moulding and shaping the channel inside and benching with C.C. (1:1.5:3) using 12mm size h.g. chips, 12mm thick C.P. (1:3) with punning to inside, cement flushpointing (1:3) to outside, R.C.C. cover slab in C.C. (1:1.5:3) using 12mm size h.g. chips with R.C.C. man hole cover, e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site, payment of royality, taxes etc. all complete as per approved specification and direction of E.I.C.Inside size 760mm x 760mm x 460mm

Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110mm dia p.v.c.pipe with allround encasing

160mm dia p.v.c.pipe with allround encasing

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.Soak way Pit (1.20 m dia x 2.00m Deep)

Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.30m in depth as per direction of E.I.C.Initial lift upto 1.50m

From 1.50m to 3.00m depth

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.

Supplying all materials labour T & P and providing C.C. (1:3:6) using 4cm h.g metal including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials labour T & P and providing brick work with K.B. Bricks having crushing strength not less than 75kg. / c.m2 with dimensional tolerance +/- 8% including watering, curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C.K.B. Brick work in c.n.(1:4) F & P

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.12 mm thick C.P in C:M (1:3)

Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C.6 mm thick C.P in C:M (1:4)

Supplying all materials labour T & P and providing cement punning for skirting including watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T & P and providing rigid and smooth centering & shuttering for R.C.C. works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials labour T & P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C.

Supplying all materials labour T & P and providing R.C.C (1:1.5:3) .using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to work site, payment of royality, taxes etc. all complete as per specification and direction of E.I.C

Supplying all materials labour T & P and fixing M.S. step iron in 12mm dia M.S. steel bar and fixing into walls of septic tank duly embedded in C.C. (1:3:6) all complete as per P.H. specification and direction E.I.C.

Supplying all materials labour T & P and fixing of R.C.C. baffle wall precast with C.C. (1:1.5:3) using 12mm b.h.g. chips and fitted to septic tank as per P.H. specification and direction E.I.C.

Supplying all materials labour T&P and Providing cement flush pointing (1:3) to brick masonary including watering, curing, conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C.

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)Drilling of 125mm dia bore :-

Drilling of 100mm dia bore :-

Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. Lowering of 125 mm dia PVC pipes :-

Cost of 125 mm dia PVC pipes :-

Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.

Supplying and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.

Supplying all labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC.

Supplying and fitting & fixing of D.O.L starter for 1.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor PVC pipes aconforming to ASTM-D-1785/89(csh-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.32mm dia HDPE pipes

Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge.

Providing electricity to the pump along with Supplyof all required accesories etc all complete as per direction of Engineer-in-charge.

Supplying all materials,labour,T&P and fitting & fixing of I.S.I make 1.00 H.P single phase Centrifugal Pump set with suitable control pannel,jointing with with GI/PVC/HDPE pipes electrification,testing,commissiong,trial running,conveyance of all materials to work site,payment of taxes etc all as direction of EIC.

DOL Control Pannel

2.50mm flat cable

Steel rope with cover

Supplying all materials, labour, T&P and providing and fixing ISI marked Deep Well Hand PumpStandard HDWP conforming to IS-15500/04 Part-II complete with accessories alongwith 8 nos connecting Rod made with bright bar electro galvanized of 12 mm dia of 3 mt. long with coupler and fitted with stand assembly including fitting & fixing and lowering of Hand Pump set at the Tube well with 32 mm Nominal bore of 3 mtr. Long Hot Pit Galvanised Screwed and Socketed fitted wih 32mm dia PVC screwed & socket fitted with socket made of seamless or machined from solid bar socket fitted at one end and threaded protection at other end conforming IS specification inclunding carriage and conveyance of all material and T & P etc. all completas per the direction of E.I.C.

Supplying all materials, labour, T&P and matreials for construction of Tubewell platform as per UNICEF platform as per UNICEF drawing and design etc all complete as per direction EIC.

Supplying all materials, labour, T&P and matreials for construction of drain as per UNICEF design etc all complete as per direction EIC.

Please Enable Macros to View BoQ information