Construction of boat jetty for docking theboats of coastal police at Vizhinjam

Amount

Jetty

od7240/2021_2022 : Forming platform for carrying out piling work using ISMB 165x350mm as longitudinal and<br>cross beams over a set of 9 nos coconut piles driven down at 50cm c/c (set of coconut piles have a<br>longitudinal spacing of 5.50m c/c) to a minimum depth of 2.5m from bed level of the sea, connecting the<br>coconut piles as set of 3 nos ISMB75x150mm and providing 25mm dia M.S rods at top and bottom of ISMB<br>75x150, welding properly,(ISMB165x350 rests over this set), connecting the sets of piles with ISMB 165x350<br>longitudinally and transversely using bolts and nuts, angle iron, welding etc wherever necessary, providing<br>100x200mm ISMB over this beam for laying wooden planks 40mm thick to form the platform excluding the<br>1.20x1.20m area for pile, forming land connection using 4 nos of coconut piles per set, 2 nos such sets to<br>withstand the load of land connection having connecting beam of ISMB 165x350mm, wooden planks 40mm<br>thick etc complete so as to form a sound platform for erecting boring tower, power winch and its machinery,<br>men and materials, etc. as per the directions of the departmental officers at site. (NOTE: At the time of<br>execution of this work the levels should be taken and this item may be done or avoided as per site condition)<br>(Minimum area of platform required for carrying out the work, ie for erecting tower, power winch, its<br>machineries, working space etc) (Approved rate for 100m cargo berth at Beypore) Data for 148.5 sq.m<br>Materials ISMB 165x350mm=10246.50kg ISMB 100x200mm=1219.20Kg , ISMB80x15mm-929.76kg<br>75x75mm angle-195.84kg<br>25mm dia MS rod-285.68kg<br>Total-12876.98kg<br>(Approved data of ce for PRICE ID 2016/964)

20.6.1.2 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile upto 50 tonne capacityRoutine test

od7241/2021_2022 : Supplying and fixing 600 mm long 20mm dia J bolt with nut and washers for providing CI<br>bollards including greasing the threads, Using wooden templates and welded to reinforcements including all<br>cost labour charges hire charges of welding etc

od7242/2021_2022 : Supplying and fixing best quality Thambakom wood wrought and put up by using bolts,<br>nuts and washers including all labour charges for fixing in facia wall but excluding the cost of nuts and bolts

od7243/2021_2022 : Making and supplying 25mm dia 500mm or nearest length T-bolts (MS bolts), nuts, and<br>washers (together weighing 1.925kg) for fixing together fenders including all charges etc. complete

od7244/2021_2022 : Supplying cast iron bollards weighing average 50kg/eash including conveyance,cost of<br>nut and bolt,drilling and welding charges and all fitting charges etc complete.

od7245/2021_2022 : Fixing supplied cast iron bollards over the deck slab using departmentally supplied<br>bolts,sleeves and washers including all cost of drilling holes on slabs fixing sleeves using expansion fillers<br>etc.complete as per the direction of departmental officers

od7246/2021_2022 : Driving down fabricated MS liner to required lines and levels including transporting from<br>fabrication yard, handling, pitching and setting piling rigs in position, temporary works for driving piles etc<br>complete as per the direction of engineer in charge.

PILING

12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.

od7238/2021_2022 : Spot welding using 8 g. approved quality electrodes for a welding length not less than 6<br>mm for stirrups and laps to remain the reinforcement in position as cage (pre cast covering should be placed<br>in position before welding) after cleaning the surface with wire brush etc. complete as directed by Engineer<br>in charge

12.23.3 : Bored cast-in-situ M35 grade R.C.C. Pile Using Batching Plant, Transit Mixer and Concrete Pump excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m.<br> Pile diameter-750 mm <br>

12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

od7239/2021_2022 : Chipping and removing top of RCC piles to lines and levels carefully without damaging&amp;lt;br&amp;gt;remaining&amp;lt;br&amp;gt;portion of the pile and removing debris upto a distance of 150 m including all labour charges, hire&amp;lt;br&amp;gt;of&amp;lt;br&amp;gt;equipments etc. complete as per the directions of departmental officers at site&amp;lt;br&amp;gt;Unit -cum&amp;lt;br&amp;gt;Taking&amp;lt;br&amp;gt;output -1.25cum.Pre-stressed / RCC grade M20 and above&amp;lt;br&amp;gt;

12.38.D.2 : Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specification<br> R C C Grade M35 - Using Batching plant, Transit Mixer and Concrete pump

13.5.G.p.2 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M30 - Height upto 5m - using Batching Plant, Transit Mixer and Concrete Pump

Creators Constructions

Bidder Name

Creators Constructions

KVJ Builders and Developers P Ltd