Comprehensive Infrastructure Upgradation: Elimination of LC by ROB/RUB, Electronic In-Motion Weighbridge, Goods Shed Development Works, Provision of Remote Control Centre, CPWI Office & Subway in Passenger Yard, and Hospital Building Improvement with Facility Upgradation in Gandhidham section of Ahmedabad Division.

Supply of 4 port -48 DC router as per specification

Supply of 4 port 10 MBPS LAN extender as per technical specification

Supply of 8-Port with 2 port SFP Networking Switch with POE, as per RDSO Specification No. RDSO/ SPN/ TC/ 65/2016, Rev.4.0

Supply of CAT-6 cable. 1 Box= 305 mtr as per Technical Specification

Supply of STP CAT-6 cable as per specification

Supply of PVC Pipe 25 mm dia ISI mark or other fixing accessory i.e. bands (L&T) coupling etc. reputed make

Supply of RJ-45 connectors as per Technical Specifications

Supply of Single mode Optical fiber cable 6 cores armoured as per specification

Supply of 25 mm dia. HDPE pipe (TEC spec. No. G/CDS-08/02, Nov'04 or latest) as per specification

Supply of Thermo shrinkable joint kit as per RDSO Spec. No. IRS/TC 77/2012 Rev-3 Amd.-1&2 or latest suitable for LC Gate RTSF suitable to 6 quad cable of spec. no. IRS TC -30/2005, Ver-1, Amd-5 or latest, and conforming to as per Technical Specifications

Supply of 20 pair twisted conductor PVC indoor cable (0.5mm) dia annealed copper conforming to as per TEC spec no. GR-WIR -06/03 March 02 or latest

Supply of Connectors/Pig Tail/Patch cords / MC/ LIU/ Patch Panels/Switch; with necessary accessories for termination/ splicing of OFC cable as per technical specification.

Supply of wall mounting 19" 15U rack as per specification

Supply of online UPS 1 KVA with minimum 60 Mins backup as per technical specification

Supply of RCC cable cable concrete (a) cable route marker at 50 mtrs. distance, as per drawing no. Drg 4014/00/CC4 or latest

Supply of Single mode patch cord as per technical specification

Supply of Fiber Media Convertor as per technical specification

Supply of Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (10KGs /bag) for each electrode & other accessories as per Drg. No. SDO / RDSO/ E&B/001 and RDSO Spec No. RDSO / SPN/197/2008.

Supply of Fiber Distribution management System FDMS suitable for termination of 48 fibers as per specification.

Supply of OFC cable 48 fibre as per RDSO specification.

Supply of HDPE duct 40/33 mm as per RDSO/ SPN/ TC /45/2013/Rev.2.0 with latest amendments.

Supply of Pastorate pre-fabricated OFC jointing pits (RCC/PVC). The material shall be supplied as per engineer in charge instructions

Supply of 2 x 24/48 fiber optic fiber splice straight joint enclosure (SJC) complete with all accessories as per RDSO/SPN/TC/ 68/2014, Rev.3 or latest amendment

Supply of thermo shrinkable joint kit as per RDSO Spec. No. IRS/TC 77/2012 Rev-3 Amd.-1&2 or latest suitable for 2T joints RTSF (75/15 mm) suitable to 6 quadcable of spec no. IRS TC - 30/2005, Ver-1, Amd-5 or latest, and conforming to as per Technical Specifications

supply of IP phone connect - IP6LP with Gigabit connectivity HD voice & 4.3''480*272 graphical LCD with backlight.

Supply of casing capping ISI size 38x16 mm as per technical specification.

Supply of 24 Port manageable switch 10/100/1000base T with four or more 1000base x Layer 2 switch (2nos 1000 LX (Fiber up link) complete with SFP transceiver module + POE including) as per specification.

Supply of Offline 1KVA UPS with 60mins backup time as per technical specification

Supply of half round RCC pipes of 150mm internal dia (2 meter long) along with collars as per IS No. 458/2003 of NP type (1meter x 2 Nos).

Supply of CLI push button telephones suitable for connection with way side equipment and the system mentioned above as per DOT/TEC specifications no. TEC/GR/CP/Tele-002-/05 Jan 2010 with latest amendment and conforming to as per Technical Specifications.

Supply of Fiber/SMC/FRP/RCC Earth Chamber

Supply of wireless router/access point for Wi-Fi connectivity as per technical specification

Supply of three core power 2.5 Sq mm multi stand power cables per confirm specification No.IS:694 1990 reaffirmed 1995 or latest.

Supply of patch cord of the 10 Mtr. length with LC-FC/ SC-APC connectors.

Supply of Microphone with cord & connector and conforming to as per Technical Specifications Running

Supply of Medium class G.I. Pipes to IS : 1239 (Pt.I)-2004 or latest ; 100mm dia. ( int. dia) 3.60 mm+/- 10% with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes.

Supply of Portable voice recorder, Handset type, both mono & stereo, 8GB storage as per technical specification

Supply of Mega phone, Mega professional audio with accessories as per technical specification

Supply of wall mounting 19" 9U rack as per specification

supply of Laser Monochrome print, Scan, Copy with USB connectivity Laser jet with accessories

Supply of Remote craft terminal as per technical specification

Supply of plug and play type portable USB data card/Dongle as per technical spec

Supply of power extension 02 nos./ 6 pins/ 16 Amps/ 10 sockets, 10 Mtrs as per technical specification

Supply of cordless mic with wireless receiver transmitter and Headphone as per specification

Supply of 12 Volt 120 AH VRLA sealed maintenance free battery

Supply of digital multimeter as per specification and conforming to as per Technical Specifications

Smart Phone with charger and sim of different service provider.

Supply of Power bank for mobile and laptops as per technical specification

Supply of hand held search light rechargeable as per technical specification

Supply of auto dialling system for emergency socket (with way site telephone, 12V 7AH battery & charger) as per RDSO Specification

Supply of fix cellular terminal (FCT) compatible to 4G as per specification

Supply of IP telephone instruments for the above exchange as per technical specifications

Supply of 55" TV as per Technical Specification

Supply of Co-axial cable RG-11/RG-59 with all necessary accessories 59 and conforming to as per Tec spec no. GR-WIR-06/03 March 02 or latest Running

Supply of 10 pair twisted conductor PVC indoor cable (0.5mm) dia annealed copper conforming to as per TEC spec no. GR-WIR -06/03 March 02 or latest

Supply of Polythene Insulated Polythene sheathed jelly field (PIJF) telephone underground cable 10 pairs 0.5 mm dia with polly - moisture barrier as per RDSO SPNCN. No. IRS TC: 41/97 with amendment No. 2 or latest

Supply of one Quad VF 2T transformer joint assembly of VF transformers 1120:470 as per IRS TC/ 766/ 2000 with ammendmend-1 or latest and conforming to as per Technical specification

Supply of Wi Fi USB adapter for PC as per specification

Supply of 4K Ultra HD LED TV 65 Inch with floor stand as per technical specification

Supply of amplifier as per specification

Supply of Horn type Speaker 15 Watts as per technical specification.

Supply of Speaker cable as per specification.

B-SUPPLY AND INSTALLATION

Installation, testing & commissioning of LAN extender

Installation, testing &commissioning of 8 Port POE L2 switch

Laying of UTP/STP CAT-6 /PVC cable through steel pipes/casing capping etc wall /floor 3 /roof. This includes fixing and clipping of casing capping / Rosette boxes at the locations/sites as per the direction of the engineer in charge of the work with all necessary fitting materials and cutting of masonry wall at the entry of room, repairing of masonry wall, cement plastering at per site requirement are to be supplied by contractor Running

Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ 4 DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings.Item includes provision of labels of coloured plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be maggered before and after its laying by contractor under supervision of Railway Representative and he will submit the maggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes

Installation of Thermo-shrinkable joining kits as per Technical Specification.

Supply & installation of 10 pair CT box and termination of 6 quad cables as per specification

Installation of Connectors/Pig Tail/Patch cords/ MC/ LIU/ Patch Panels/Switch; with necessary accessories for termination/ splicing of OFC cable

Installation of 15U/12U/19U wall mounting rack with all installation material and 8 restoration of wall in original condition

Excavation of trench 300 mm wide at the bottom and 1.2 mtr deep, in all type of soils including clearing of trees, bushes, etc. and refilling of cable trench by excavated soil and ramming after laying of HDPE DUCT (laying of HDPE/DWC &, PIJF cables etc., will be paid under different items 9 of the schedule). Where desired dimensions of trenches could not be achieved proportionate payment will be made as decided by Engineer-in-charge of the Railway at site. The trenching outside the station limits I.e.) between the home signal of station 'A' to home signal of station 'B' may be done manually or by machine, as per the directions of site in charge. In no case the payment will be made for the trench of higher dimensions, than the dimensions as mentioned above.

Installation of RCC cable route markers engraved in one side and painted on both sides along the route every 50m and route diversion as per Drg shall be provided by railway

Installation of Maintenance Free Earth Electrode for Maintenance Free Earth spec of

Installation of fiber distribution management system as per Technical Specification.

Transportation and Laying of HDPE pipe as per approved cable route plan in the 13 excavated trench, taking due care while transporting and laying the same in the trenches or other protective works. Both the end of duct should be sealed with end plugs before laying and should remain sealed till blowing is done

Blowing of OFC through HDPE duct & protective work (elicited in above item) already provided. Where it is not feasible to blow OFC due to curves, road/track crossings, bridges or for any 14 other reason, OFC shall be drawn or laid manually as per standard procedure. All the equipment and machinery required shall be arranged by the contractor at his own cost. In case OFC is to be laid adopting 'Direct in trench' method then this item shall be paid as per accepted rate of item no. (6h) of this schedule. OFC and HDPE pipe shall be supplied by the railway.

Splicing of laid under above items OFC cable and making the splice joint in dust free environment with contractor's own equipment and labour. Straight joint enclosure (SJC) is covered under schedule 'A' remaining all required materials, tools, plants shall be arranged by the contractor. 15 splicing shall be started from one end and each splicing shall be monitored after splicing and after closing the enclosure for all the fibers from one central location by contractor's engineer with his own OTDR and optic Talk set with railway engineer , trace for the fibers shall be taken and signed jointly, if any fibred splice shows high loss/lossy event, the same shall be redone before completion of splicing work. The splice loss shall be as per the policy/technical circulars issued by the railways from time to time.

Installation of Pastorate pre-fabricated OFC jointing pits (RCC/PVC). The material shall be supplied as per engineer in charge instructions Running

Horizontal direction drilling/boring without damage of surface road using Auger 17 Machine. The bore shall be 150 mm dia & shall be done at the depth of minimum 1200 mm from the ground level.The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtrs long. this include insertion of different dia DWC pipe/ GI pipes with coupling etc.

Supply & installation of professional 19'' mount equipment racks 9U for housing telecom equipment

Hiring of JCB machine (in good working condition for leveling an dressing ground/dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel etc. The contractor shall arrange road permit for vehicle 19 for all the state of operation, asper instructions of engineer in charge and vehicle shall not be more than three years old. Payment shall made for actual working hours at site. (i) 01 JCB machine for approx 4 to 5 Hrs. per day for 30days.01x5Hrsx30 days=150 Hrs. (ii)The time period and working days may be decrease/increase asper site condition. The payment shall be made as per actual working hrs

As and when required by the Engineer in charge arranging/providing of labours for various safety related works such as protection of track etc. with contractors T&P, equipment etc. Scope of work as furnished in the tender and directed by the Engineer in charge.

Installation of 2T Derivation joint for jointing kit.

Supply, installation, testing and commissioning of ONT unit with 1PON port & 4 RJ45 Giga Ethernet,802. each, 1 xPOTS (RJ 11)Ports, 300mbpsWi-Fi, VLAN, IGMP, VoIP, QoS, Auto- discovery/Link detection, Dual Band as per technical specification

Supply, installation, testing and commissioning of wall mount Outdoor 1:4 Optical splitter for PON with fusion Splicing termination as per technical specification/site requirement Running

Laying of half round RCC pipe after laying the cables in the trenches. (Cable laying is covered separately)

Supply and installation of layer 2, 24 port PoE switch as per technical specification

Supply, installation and commissioning of 2.5 Gig PON Port SFP Module for OLT as per technical specification

Supply and Installation of RFTS 400 with 8 port Optical Control Module (OCM) as per technical specification.

Supply, Installation, engraving and painting of RCC cement concrete (a) Cable route 28 marker @ 50 Mtrs. Distance as per drawing No. Deg/4014/00/CC4 or latest. Sample to be approved by engineer in charge of the Railways before supply , after the testing prescribed in the drawing. This includes the supply of paints of different colours as per drawing. The paint used for painting shall be either from Asian/Nerolac/Berger having ISI Mark.

Supply, installation, Testing & Commissioning of 08 port FXS gateway compatible with existing Auto exchange installed

Installation, testing & commissioning of Wi-Fi access point

Laying of OFC/Power cable/PVC cable through HDPE pipe casing capping/fall ceiling 31 with laying/fixing of HDPE pipe/casing capping for interfacing various components and system integration. All materials for jointing and termination of power cable as per site requirement are to be supplied by contractor Running

Placing of DWC/ RCC pipe in trench for track / road crossing protruding equally outside 32 the rail/road edge on either side. Note: (1) This also includes running the cable through the existing DWC/RCC / GI troughing wherever practicable as decided by the site in charge. (2) Taking the cable inside the station/LC gate/relay huts of pre-fabricated structures from cable pit, for which duct has to be left by the tenderer at the time of construction of relay room/installation of the pre-fabricated structure.(3) Covering the cable entry with masonry work after terminating the cables. Running

Laying and fixing of Medium class GI pipes 100 mm Dia (4.5 mm thickness) as per IS 1239 ( Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm or 33 less with 10 mm Dia hole, or at any other locations as decided by Site Engineer. The GI pipe is to be filled with chattered compound. It includes supply of all material required for fi Xing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. The e laying and fi Xing to be done as per RDSO drawings No. SDO/cable laying/011 and SDO/cable laying/012, issued vide RDSO document No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest.

Supply, Installation and commissioning of CCTV camera for remote monitoring of ART and 4G dongle/wi-fi.

Supply, Installation and commissioning of 04 PON port OLT with 4 port SFP +(10G), 4 port SFP(Giga Fiber) & 4Port Giga TX/SFP Combo, ITU-TG.984/G .998,L2switchingfunctionality, 4096VLAN, QoS, SNMP, IGMP as per technical specification

Supply, installation, Testing & Commissioning of 32 port FXS gateway compatible with existing Auto exchange

Supply and Placing of trunking and capping (RCC duct) of 300mm width and 700mm Length

Supply and fixing of TMC DP Box for 20 pair with krone modules along with mounting arrangement and its standard installation as per specification

Supply and installation of Online UPS of rating 2 KVA with Battery of backup time 120 Minutes as per specification