MPLADS

BILL OF QUANTITIES

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

1 Providing and fixing 35mm. Thick Panelled ,glazed 5.10 One 3933.51

orPanelled and glazed shutters for doors,windows Sqm

andclearstory windows including anodised

alluminiumbutt hinges with necessary screws and

Indian TeakWood shutters with-(B) Partical

board panells.12mm. thick including applying primer

and two coats of oil painting etc. complete

2 Finishing wall with weather proof exterior emulsion 193.00 One 120.26

paint on wall surface(two coats) to give an required Sqm

shape even shade after thoroughly brushing the

surface to rempve all dirt, and remains of loose

powdered materials etc complete..

3 Distempering (Two coats) with oil bound distemper 226.00 One 75.68

of approved brand and manufacture and of required Sqm

shade on wall surface to give an even shade over

and including a priming coat with distemper

primer of approved brand and manufacture after

thoroughly brushing the surface free from mortar

dropping and other foreign matter and also

including preparing the surface even and papered

4 Proving and fixing cast iron spigot and socket 30.00 One 892.39

soil, waste and ventilating pipes of the following Rmt.

nominal size.(C) 100 mm. Dia.

5 Proving and fixing in position cowl vent to pipes(C) 2.00 One 505.17

100 mm. Dia. No

6 Providing and fixing urinal of approved quality 3.00 One 1074.86

including connection with trap and with integral No

longitudinal flush pipe (A) White earthen ware flat

back or corner type size 430mm x 260mm x 350mm

7 Providing and fixing wash basin with single hole for 8.00 One 1970.39

pillar tape with C.I. of M.S. brackets painted white No.

including cutting holes and making good the same

but excluding fittings (A) Stainless steel Acrysil or

Equivalent make- Flat back wash basin 550mm

x 400mm size with CP brass couplin, padastal

matching the shade, waste pipe etc comp

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

8 Providing, laying and jointing in true line and level 47.00 One 876.90

110 diametre U.P.V.C (Type B) conforming to IS 13592- Rmt.

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

9 Providing and fixing concealed center point to wall 40.00 One 338.24

ceiling & floor CPVC (SDR 13.5) PIPE having National Rmt.

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [D] 32mm.

10 Providing and fixing concealed center point to wall 30.00 One 208.80

ceiling & floor CPVC (SDR 13.5) PIPE having National Rmt.

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [B] 20mm.

11 Proving and fixing screw down bib taps of following 25.00 One 186.83

size.(A) Brass screw downbib tap polished bright. (I) No

12 Proving and Fixing double coated Syntex or 1500.00 One 3.95

Equivalent PVC ( ISI) mark water tank of required Litre.

capacity each with all necessary fittings and

connection etc. comp on terrace or as directed by

Engineer - in charge.

13 Pro. /Fix. with windows with 40x40x5mm. Iron 0.70 One 3930.67

angle & frame 30x30x4 mm size in Double Sqm.

Shutter with B.G. 20 Gauge Sheet plates with

Hold fasts ,Iron hinges handles,stopper ,and locking

arrangement etc. comp. Steel welded is built up

section cutting hoisiting , finishing in two coats of oil

painting over coat of primer coat etc. comp.

14 Providing and fixing M.S. Grills of required 335.00 One 172.41

pattern to wooden frames of Pipe / Angles Kg.

etc.including Priming coat of approved primer and

Two coats of Oil painting etc. complete

ORNAMENTAL grill .

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

15 Providing and fixing 30mm thick FACTORY MADE 11.50 One 1146.37

SOLID PANEL PVC DOOR SHUTTER consisting of Sqm.

frame made out of M.S. tubes of 19 gauge thickness

and size of 19mm x 19mm for stiles and 15mm x

mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and

manufacture, M.S. frame shall be covered with 5 mm

thick heat moulded PVC ‘C’ channel of size 30 x

mm forming stiles, and 5mm thick 75mm wide PVC

sheets for top rail, lock rail and bottom rail on either

side, and 10mm (5mm x 2) thick, 20mm wide cross

PVC sheet as gap insert for top rail and bottom rail,

Panelling of 5 stiles and rails with 30mm wide x 5mm

thick PVC sheet beading on eighter side, and joined

together with solvent cement adhesive,. An additional

5mm thick PVC strip of 20mm width is to be stculk

on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per

direction of Engineer in charge. Manufacturer's

specification and drawing

16 Providing & Fixing Acrylic sheet name board size 1.20 One 1515.00

2.00 mt x 0.60 sqm. With painting letters Indicating Sqm.

Gram panchayat office / Village/ Taluka/ Dist. Etc.

as directed by Adm. Department etc. with all required

material & Labour comp.

17 Point wiring for Light / Bell with 2-1.5 sq.mm & 25.00 One 449.45

earthwire of 1.5 sq.mm (Green) both are of ISI marked Point.

1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete

with 6A Modular type switch / bell push &

accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories Cat- III

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

18 Point wiring for FAN with 2-1.5 sq.mm & earthwire 6.00 One 629.23

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Point.

Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete

with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth

continuity of following type erected on PVC /

Metallic box, single mounting base frame covered

with textured /metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessoriesCat-

19 Point wiring for Looped Plug with 6A Modular type 3.00 One 241.39

switch & 5 pin socket erected on PVC / Metallic box, Point.

single mounting base frame covered with textured /

metallic front plate modules erected on / in wall /

ceiling with following type accessories Cat- III

20 Point wiring for individual Plug with & Earth wire of 2.00 One 473.69

FRLS PVC insulated multistrand copper wires, in Point.

following type of pipe to be erected concealed in /

surface of wall/ceiling complete with Modular type

switch and 5 Pin plug erected on PVC/ Metallic box

covered with appropriate front plate modules erected

on / in wall/ ceiling as per pipe erected with

following type of (I) For 6A Plug with 2-1.5 Sq.mm

Cu. wire (f) With medium class rigid PVC Pipe and

accessories - Cat_III

21 Providing & erecting Switch board for Computer 1.00 One 1081.71

or electric apparatus consisting of following items No.

in single board erected on PVC / Metal board

with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal

plug-switch combined. 4 nos. 6A Switch 4 nos. 6A

pin Plug [B] For Modular Type Accessories Cat. III

22 Supplying and erecting led lamps with following 22.00 One 188.87

wattage capacity of 220 to 240 voltage, minimum No.

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A)

LED Lamps integral type, with PC diffuser suitable

LAMP holder (iii) 10 to 15 watts

23 Miniature circuit breaker single pole 6A to 25A 1.00 One 112.11

suitable to operate on 240 V A.C. system and having No.

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat-lll

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

24 Providing & erecting 240 V MCB double pole switch 1.00 One 295.93

for lighting load (B Curve) having 10 KA breaking No.

capacity & Confirming to IS :8828 in Existing box

having capacity (B) 40 Amp.- Cat-III

25 Providing and erecting Sheet Steel powder coated 1.00 One 1492.78

MCB distribution board flush / surface mounted No.

fitted with busbar, neutral link, earth bar and DIN

rail, confirming to IS 13032 and BS 5486-1986

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of

MCB to be used) (A) Single phase 12 way SS double

26 Pipe type earthing having 150 cms.long and 2.5 1.00 One 540.35

cms. dia. galvanised iron pipe with coupling and No.

buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire. For using salt and

charcoal / coke as required for pipe type earthing.

27 Providing and laying cement concrete 1:4:8 (1- 6.00 One 2927.46

Cement : 4- coarse sand : 8- hand broken stone Cum

ggregates 40 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and

28 Providing & laying C.C. 1:11/2:3 (1 cement ,11/2 7.00 One 8035.64

course sand,3 graded stone agg.of 20 mm nominal Cum

size) and finishing smooth with curring etc. comp.

incl. the cost of formwork but excl. the cost of

reinforcement for R.C.C. work in. (A) Beam :-

Having cross sectional Area 0.085 to 0.12 Sqm.Above

29 Providing & laying ordinary cement concrete1:11/2:3 5.00 One 7258.19

(1 cement ,11/2 course sand,3 graded stone agg.of 20 Cum

mm nominal size) exposed work with curring

etc.comp. incl. the cost of formwork but excluding

the cost of reinforce ment for R.C.C. work in.

SLAB :- having more then 10cm. and end

upto 13cm. thickness.Above floor level

30 Providing fixing of Polished Kotah stone frame 16.00 One 972.06

for Doors & wIndows of 15cmx4 cm. Size Sqm

including necessary holdfasts, holes for fixtures and

fastenings incl. all labour & materials etc. comp

31 Providing 15mmthick cement plaster in single coat on 193.00 One 195.42

fair side of Brick/concrete walls for interior Sqm

plastering upto floor two level and finished even

and smooth in (I)cement mortar 1:3 (1 cement:3

sand) .Above floor two level

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

32 Providing 10 mmthick cement plaster in single coat on 226.00 One 196.27

fair side of Brick/concrete walls for interior plastering Sqm

upto floor two level and finished even and smooth

in (I)cement mortar 1:3 (1 cement:3 sand) .Above

floor two level finished even & Smooth with floating

coat of neat cement slurry.

33 Providing fixing of Polished Kotah stone frame 0.80 One 2421.16

for windows of 15cmx4cm. Size including Sqm

ordinary grill fitting,painting the grill, necessary

holdfasts, holes for fixtures and fastenings incl. all

& materials etc. comp

34 Providing and laying Ceramic tiles 6mm thick in 40.00 One 992.15

flooring treads of steps and landing laid on a bed of Sqm

12mm thick cement mortar 1:3 (1 cement : 3-coarse

sand ) finishing with flush pointing in white

35 Providing and layingCeramic tiles 6mm thick in 86.00 One 1023.89

skrting risers of steps and dedo on 10mm thick Sqm

cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

36 Proving and fixing water closet squatting pan (Indian 7.00 One 1436.33

type W.C.Pan) size 580 mm. incl. 100mm. Size P trap No.

& Foot rest(Earthwork, bed concrete,foot rests and

trap to be measured and paid for separately)

(A) Vitreous china (I) Long pattern white colour.

37 Providing and fixing S.W. gully trap with C.I. grating 12.00 One 1292.19

brick masonry chamber and water tight C.I. cover No.

with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps.

(A)100mm x 100mm size P type.

38 Constructing brick masonry road gully chamber 4.00 One 3504.02

450mm x 450mm x 775mm with vertical grating No.

complete With C.I.Manhole Cover 450x600 mm size

39 Providing and laying broken china mosaic 48.00 One 779.70

flooring for terrace using 12 mm to 20 mm broken Sqm.

pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement

including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

40 Providing and laying polished kota stone slab flooring 1.50 One 1019.39

over 20mm (average) thick base of cement mortar 1:6 Sqm.

(1 cement : 6 coarse sand) or L.M. 1:1.5 laid and

jointed with grey cement slurry including rubbing

and polishing etc. complete 25mm Thick

Item Description of Item (With brief specification and Quantity Unit Rate In Amount

No. reference to book of Specification) Figures

41 Providing TMT Bar FE 500D reinforcement for R.C.C. 4050.000 One 77.29

work including bending, binding and placing in Kg.

position complete upto floor two level

42 Providing & laying ordinary C.C. 1:1 1/2:3 ( 1 2.00 One 8888.19

cement ,1 1/2 course sand, 3 graded stone agg. of 20 Cum

mm nominal size )and for R.C.C. LINTELS incl.

Finishing smooth with curring of formwork but

excl. the cost of reinforcement.Upto Floor Two Level

43 Providing and laying ordinary cement concrete1:1.5:3 5.00 One 10839.25

(1cement,1.5sand, 3 gradedstone aggregates 20 Cum

mm.Nominal size) and finishing smooth with curing

etc. complete including the cost of formwork but

excluding the cost of reinforcement of R.C.C. work in

Column (iii) Having cross-sectional area more than

0.085 Sq.M. and up to 0.12Sq.M.

44 Brickwork using common burnt clay building 33.00 One 4496.05

brick shaving crushing strength not less than 35 Cum

Kg/Sqcm. in super structure Upto floor two level

in cement mortar 1:6(1 Cement ; 6 Fine sand)

45 Providing & fixing PVC SWR Nanhi trap IS 14735 for 8.00 One 586.27

drain - 100 mm diameter with jali of following No

nominal diamete self cleaning design with C.I. scread

down or hinged gratting including cost of cutting &

making good the walls

Twelve Lakh Thirty Two Thousand Six Hundred Sixteen Rupees And Forty Two Paisa

I \ We am \ are willing to carry out the work at ……………………… % above \ below percent ( Should be

written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works put as

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division