Special Reparing to SRP Barrack (G+2) at SRP Gr-4 Pavadi Dist Dahod [3rd Attempt]

NAME OF WORK : Special Repairing to SRP Barrack (G+2) at SRP Gr-4 Pavdi Dist Dahod (Incl. Elec.)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

1 Dismantling tiled of stone floor laid in mortar including stacking of serviceable materials and 514.00 Smt 49.38 Rs. Forty Nine & Paise

disposal of unserviceable material with all lead and lift Thirty Eight Only

2 Dismolition of brick work & stone masonry including stacking of serviceable materials and 5.00 Cmt 570.59 Rs. Five Hundred

disposal of unserviceable material with all lead and lift (ii) in cement mortar Seventy & Paise Fifty

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats 140.00 Nos 194.71 Rs. One Hundred

architraves, holdfasts and other attachment etc. complete and stacking them within all lead Ninety Four & Paise

and lift.(ii) Not Exceeding 3 Sq.M. in area. Seventy One Only

4 Credit value for M.S. Grill and removed from site and clean site. 2957.00 Kg -25.00 Rs. (-) Twenty Five -73925.00

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps 205.00 Rmt 77.72 Rs. Seventy Seven &

including stacking the materials with all lead and lift ( for any dia, of pipe) Paise Seventy Two

6 Dismanling Sanitary fittings like Wash basin. W.C Pan Indian and European type ,flusing 20.00 Nos 419.90 Rs. Four Hundred

tank etc.Including stacking the materials with all Lead & Lift Ninteen & Paise Ninety

7 Removing & Scraping of old deteriorated plaster of any thickness from wall / RCC member 197.00 Smt 20.16 Rs. Twenty & Paise

including stacking of serviceable material and disposal of unserviceable from site of work Sixteen Only

with all lead & lift.

8 Providing and fixing Steel Cupboard with shutter and necessary frame from 18 gauge sheet 111.00 Sqm 1526.32 Rs. One Thousand Five

including all necessary fixture & fastenings locking system etc. complete with one coat of Hundred Twenty Six &

primer & two coat of oil painting etc complete as per drawing & specification. Paise Thirty Two Only

9 Provinding and Fixing Steel Cupbord locking arragngemnet (Godreg Lock) ,handle ,hings & 46.00 job 426.61 Rs. Four Hundred

other accessories make Shall be used as per approved material list by GSPHCL. As per Twenty Six & Paise

instuction of engineer in charge for all floor . Sixty One Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

10 Providing and laying 25mm thick Double Pre Polished (Dimond Polished) Kota Stone 98.00 Sqm 1108.30 Rs. One Thousand One

Flooring over average 20mm thick base of cement mortar 1:6 (1 Cement : 6 Coarse sand) Hundred Eight & Paise

and jointed with gray cement slurry including rubbing and polishing etc. complete. All kotah Thirty Only

stone edges shall be hand cut, Machine cut shall not be allowed.

11 Providing and laying 25mm thick Double Pre Polished (Dimond Polished) Kota Stone in 7.00 Sqm. 1292.70 Rs. One Thousand Two

risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : Hundred Ninety Two &

3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of Paise Seventy Only

slab including rubbing and polishing etc. complete.

12 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for Interior Plastering 18.00 Sqmt. 226.90 Rs. Two Hundred

and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 sand ) Including Finishing with a Twenty Six & Paise

Floating Coat of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at Ninety Only

13 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 20.00 Sqm 254.01 Rs. Two Hundred Fifty

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Four & Paise One Only

floating coat of neat cement slurry at FIRST FLOOR.

14 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 19.00 Sqm 281.12 Rs. Two Hundred

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Eighty One & Paise

floating coat of neat cement slurry at SECOND FLOOR. Twelve Only

15 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 27.00 Sqm 229.09 Rs. Two Hundred

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Twenty Nine & Paise

finishing with floating coat of neat cement slurry at GROUND FLOOR. Nine Only

16 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 24.00 Sqm 258.23 Rs. Two Hundred Fifty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Eight & Paise Twenty

finishing with floating coat of neat cement slurry at FIRST FLOOR. Three Only

17 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 19.00 Sqm 287.37 Rs. Two Hundred

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Eighty Seven & Paise

finishing with floating coat of neat cement slurry at SECOND FLOOR. Thirty Seven Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

18 Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level 74.00 Sqm 350.48 Rs. Three Hundred

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Fifty & Paise Forty

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Eight Only

19 Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN DOOR shutter with Frame 4.00 Sqm 4476.00 Rs. Four Thousand Four

made from co-extruded three- layer rigid PVC foam sheet (single Extruded) with density not Hundred Seventy Six

less than 600 kg/cbm outer layer 1 mm thick should be of rigid PVC with density of not less Only

than 1400 kg/cbm manufactured by an ISO 9001-2015 certified company. Complete as per

direction of Engineer-in-charge, manufacturer’s specification & drawing.

20 Providing and fixing Alluminium Section Window having extruded Aluminum Colour 66.00 Sqm 1902.50 Rs. One Thousand Nine

anodized section horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Hundred Two & Paise

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Fifty Only

Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of

size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details including One

Mosquitoe Jalli Shutter With Both Side Locking Arrangment.

21 Providing and fixing extruded Aluminum Section Windows having extruded aluminum 17.00 Sqm 2436.01 Rs. Two Thousand Four

Colour anodized section horizontal Four track member size 122.20mm x 31.75mm x 1.10mm Hundred Thirty Six &

(of Jindal Section no:8787,@ Wt. 1.205 Kg/mt), Vertical member of size 122.20mm x Paise One Only

31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window including Two

Nos of Mosquitoe Jali Shutter of Size 1750mm X 850mm with Locking Arrangment.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

22 Providing and fixing window having extruded aluminum Colour anodized section horizontal 22.00 Sqm. 1568.27 Rs. One Thousand Five

Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member Hundred Sixty Eight &

of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal Paise Twenty Seven

member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x Only

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

23 Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x 17.00 Sqm. 1163.92 Rs. One Thousand One

38.10mm x 1.2mm (Jindal Section :2434,@Wt.0.643 kg per mt) with colour anodized Hundred Sixty Three &

alluminium frame for ventilation with 5mm thick frosted glass as details etc complete for Paise Ninety Two Only

24 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs and 137.00 Smt 2427.83 Rs. Two Thousand Four

sills of doors & windows using neat cement slurry laid over 20 mm average base of cement Hundred Twenty Seven

mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including & Paise Eighty Three

racking(Tancha Work) rubbing and polishing,scaffoldings,tools and tackles,scaffolding etc. Only

complete(with base of neat cement) as per direction of Engineer in charge including

rounding the exposed edges as directed.

25 Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from 4692.00 Kg 75.41 Rs. Seventy Five &

M.S. flat, square bars, round bars, c-channel, Square/round box pipe as per detail Drawings. Paise Forty One Only

Rate is inclusive of welding with grinding smooth wirh two coats of Oil paint and one coat of

yellow Zinc chromate primer coat of approved brand only. Oil paint shall be used as per

approved material list of GSPHCL. Steel must be of ISI mark only.

26 Providing & laying acrylic base ( zycosil or equivalent ) Water proofing paint treatment in 74.00 Sqmt 110.70 Rs. One Hundred Ten &

two coats to vertical and horizontal surface of depressed prortion of Bath / WC as directed Paise Seventy Only

by Engineer in charge.This treatment shall be carried out over and above water proofing

cement plaster.

27 Provinding 10 mm thick cement PLASTER in single coat of interior plastering and 74.00 Sqm 237.45 Rs. Two Hundred Thirty

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with Seven & Paise Forty

floating coat of neat cement slurry including providing and mixing with WATER PROFFING Five Only

material For ALL FLOORS.

28 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 1) 170.00 Rmt 24.04 Rs. Twenty Four &

including neat cement finishing, watering etc. Complete. Paise Four Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

29 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. 8.00 Cmt 791.68 Rs. Seven Hundred

Ninety One & Paise

Sixty Eight Only

30 Providing & laying Cement Concrete flooring 1:2:4 (1- cement 2; sand 4- M/c graded stone 74.00 Sqm 352.17 Rs. Three Hundred

aggregate of 20 mm nominal size) laid in one layer finished with a floating coat of neat Fifty Two & Paise

cement (B) 50mm thick. Seventeen Only

31 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile flooring over 20 mm 113.00 Smt 1458.33 Rs. One Thousand Four

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on Hundred Fifty Eight &

existing flooring by adhesive including dismentaling of existing flooring and material Paise Thirty Three Only

jointed with color cement slurry including finished with flush pointing & cleaning the surface

etc. complete. Size & Shade of tiles shall be as per Approved drawing & as per direction of

Engineer in charge.for all floor.

32 Provinding & laying Printed / Coloured Glazed 8mm thick TILES in skirting, risers of steps 476.00 Smt 1508.58 Rs. One Thousand Five

and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with Hundred Eight & Paise

white cement slurry. ( Size of Tiles shall be 600 mm x 300mm ). Size & Shade of tiles shall be Fifty Eight Only

as per Approved quality & Colour by GSPHCL..for all floor.

33 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over 2330.00 Sqm 155.21 Rs. One Hundred Fifty

and above applying One Coat Of Primer to give an required shape even shade after Five & Paise Twenty

thoroughly brushing the surface to remove all dirt, and remains of loose powdered One Only

materials.etc complete. primer,Exterior Emulsion Paint Shall be used as per approved

material list by GSPHCL. (For All Floor)

34 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two 1437.00 Sqm 192.51 Rs. One Hundred

coats) to give an required shap even shade after throughly brushing the surface to remove Ninety Two & Paise

all dirt and remains of loose poweder material etc. complete. Rate are inclusive of applying Fifty One Only

two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give and

even shade including thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth. Fine Putty, primer, plastic Emulsion Paint Shall be

used as per approved material list by GSPHCL. (For All Floor)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

35 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required 2625.00 Sqm 181.87 Rs. One Hundred

shap even shade after throughly brushing the surface to remove all dirt and remains of loose Eighty One & Paise

poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and Eighty Seven Only

one coat of primer on new wall surface to give and even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and sand papered

smooth. Fine Putty, primer, plastic Emulsion Paint Shall be used as per approved material

list by GSPHCL. (For All Floor)

36 Removing Dry or oil bound distemper by a washing and scraping and sand papering the 4061.00 Sqm 13.40 Rs. Thirteen & Paise

wall surface smooth including necessary repairs to scratches complete. Forty Only

37 Painting two coats(excluding priming coat)on previously painted wood and wood based 357.00 Sqmt 118.08 Rs. One Hundred

surface with enamel paint to give an even shad imcluding cleaning the of all dirt,dust and Eighteen & Paise Eight

other foreign matter Only

38 Painting two coats (excluding priming coat) on perviously painted steel and metal surfaces 807.00 Sqm 100.94 Rs. One Hundred &

with Synthentic Enamal Paint. Paise Ninety Four Only

39 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE 26.00 Rmt 443.29 Rs. Four Hundred Forty

having National Sanitation Foundation (NSF) seal For Portable Water of 40 mm. dia. nominal Three & Paise Twenty

bor tube fitting and clamps including making good the wall, ceiling and floor etc. Nine Only

40 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE 27.00 Rmt 251.31 Rs. Two Hundred Fifty

having National Sanitation Foundation (NSF) seal For Portable Water of 25 mm. dia. nominal One & Paise Thirty One

bor tube fitting and clamps including making good the wall, ceiling and floor etc. Only

41 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE 13.00 Rmt 206.73 Rs. Two Hundred Six &

having National Sanitation Foundation (NSF) seal For Portable Water of 20 mm. dia. nominal Paise Seventy Three

bor tube fitting and clamps including making good the wall, ceiling and floor etc. Only

42 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all 38.00 Nos. 990.61 Rs. Nine Hundred

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Ninety & Paise Sixty

Specifications and as per the Instruction of Engineer In charge. Materials used for the above One Only

items Must be list approved by G.S.P.H.C.L.

43 Providing and fixing chromium plated brass half trun flush cock of approved quality 20.00 Nos. 261.16 Rs. Two Hundred Sixty

including fixing in pipe line etc. complete.(ii) 25mm dia. One & Paise Sixteen

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

44 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union, 18.00 Nos 3935.33 Rs. Three Thousand

P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Nine Hundred Thirty

Connection 32mm dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all Five & Paise Thirty

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Three Only

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wash

Basin Shall be as per the Approved Make List of GSPHCL.

45 Providing and fixing Urinal or approved quality including conecting the Urinal with waste 5.00 Nos 1064.22 Rs. One Thousand Sixty

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Four & Paise Twenty

260mm x 350mm. Two Only

46 Provinding and fixing gun metal check or non return full way WHEEL HANDLE VALVE 40mm 2.00 Nos 656.86 Rs. Six Hundred Fifty

dia. Rate are inclusive of all matreials, Labour Necessary Fittings etc. Complete as per Six & Paise Eighty Six

Detailed Drawings, Specification and as per the Instruction of Engineer In charge. All Only

material used as per approved make list by GSPHCL

47 Provinding and fixing gun metal check or non return full way WHEEL HANDLE VALVE 25 4.00 Nos 416.47 Rs. Four Hundred

mm dia. Rate are inclusive of all matreials, Labour Necessary Fittings etc. Complete as per Sixteen & Paise Forty

Detailed Drawings, Specification and as per the Instruction of Engineer In charge. All Seven Only

material used as per approved make list by GSPHCL

48 Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. 15.00 Nos. 16.47 Rs. Sixteen & Paise

Forty Seven Only

49 Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. 15.00 Nos. 28.16 Rs. Twenty Eight &

Paise Sixteen Only

50 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 74.00 Rmt 245.74 Rs. Two Hundred Forty

75mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, Five & Paise Seventy

reducer, coupler single T with door bend, with washer for vertical drain etc.complete and Four Only

making good the wall,ceiling and floor.ISI make only joints shall be sealed by pipe sealant.

51 Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 74.00 Rmt 471.36 Rs. Four Hundred

110mm dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, Seventy One & Paise

reducer, coupler single T with door bend, with washer for vertical drain etc. complete and Thirty Six Only

making good the wall,ceiling and floor.ISI make only joints shall be sealed by pipe sealant.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

52 Providing & fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 108.00 Rmt 302.54 Rs. Three Hundred Two

90mm Dia Complete with Special flings, Compressor type Fittings, with washer for vertical & Paise Fifty Four Only

drain etc. including making good the ceiling and floor on terrace rain water pipe shall be

mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

53 Providing and Fixing SWR / UPVC Nahni trap of the following nominal dia self cleaning 22.00 Nos. 594.29 Rs. Five Hundred

Design with top tile and making good the wall and floors 100mm intel and 50mm outlet Ninety Four & Paise

including 150mm square stainless steel jail with grating. Twenty Nine Only

54 Provide & Fixing Floor Drain jali (Glossy Finish) (on N.T.) of 6" x 6" size made of Stainless 24.00 Nos 613.97 Rs. Six Hundred

Steel Grade 304 Floor Drian 3 piece (Cover / Jali / Grating) With anti Cockroach Bowl on Thirteen & Paise Ninety

N.T. rate are inclusive of all necessary fittings, material, labour, etc. compelete as per Seven Only

direction of Engineer In Charge

55 Provinding and fixing SW gully trap with out CI grating brick masonary chamber and water 8.00 Nos. 1176.94 Rs. One Thousand One

tight CI cover with frame of 300*300mm size inside with standard weight (I) Square mouth Hundred Seventy Six &

traps ©150*100mm size P or R type Paise Ninety Four Only

56 Providing & fixing in position ISI marked Rotational moulded Polyethylene double layer 3000.00 Ltr 3.91 Rs. Three & Paise

cylindrical vertical storage tank (IS : 12701) water tank size inlcuding making inlet and Ninety One Only

outlet. Over flow and washout arrangement with G.I. connection inlcuding using necessary

M.H. for connection etc. complete with closed cover including applying two coats of oli

painting outside the tank etc.complete.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

57 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 15.00 Rmt 229.00 Rs. Two Hundred

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing Twenty Nine Only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete. (100mm

ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the

help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at

bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from

site stacks to the place of laying etc. as per direction of Engineer-in-charge.

58 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 15.00 Rmt 396.00 Rs. Three Hundred

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing Ninety Six Only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete. (150mm

ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings with the

help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at

bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from

site stacks to the place of laying etc. as per direction of Engineer-in-charge.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

59 Constructing brick masonry chamber for under ground C.I. inspection chamber and bends 5.00 Nos. 3793.18 Rs. Three Thousand

with brick having crushing strength not less than 35 kg./cm2 in C.M. 1.5 precast R.C.C. Seven Hundred Ninety

cover 1:1.5:3 of size 455 x 610 mm internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 Three & Paise Eighteen

mix (1 Cement : 1.5 coarse sand :3 graded stone aggregate 20mm size) foundation concrete Only

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cment walls & bed connect etc. complete rate inclusive of outside plaster of 15mm

thick in cm 1:3 form top of chamber and all side up to 15 cm deep below ground level. rate

also inclusive of providing and fixing precast cover of size .455m x 0.61 x .07 m with 2 no of

m.s. flat handle in cement concrete 1:1.5:3. including angle frame of section 40x40x5mm

section etc complete.(i) Inside Diamensions 455mm x 610mm and 450mm deep for

single/ Multiple pipe line.

60 Extra over above Item No59 for additional depth 0.1 mt. or part thereof beyond 450mm 5.00 Nos. 239.99 Rs. Two Hundred Thirty

depth for brick masonary chamber for 455mm x610mm size. Nine & Paise Ninety

61 Constructing brick masonry chamber for under ground C.I. inspection chamber and bends 5.00 Nos 5476.93 Rs. Five Thousand Four

with brick having crushing strength not less than 35 kg./cm2 in C.M. 1.5 precast R.C.C. Hundred Seventy Six &

cover 1:1.5:3 of size 600 x 850 mm internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 mix Paise Ninety Three

(1 Cement : 1.5 coarse sand :3 graded stone aggregate 20mm size) foundation concrete Only

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat

of neat cment walls & bed connect etc. complete rate inclusive of outside plaster of 15mm

thick in cm 1:3 form top of chamber and all side up to 15 cm deep below ground level. rate

also inclusive of providing and fixing precast cover of size 0.7 m x 0.6 x .07 m with 2 no of

m.s. flat handle in cement concrete 1:1.5:3. including angle frame of section 40x40x3mm

section etc complete. (i) Inside Diamensions 600mm x 850mm and 450mm deep for single

62 Extra over above Item No 61 for additional depth 0.1 mt. or part thereof beyond 450mm 5.00 Nos 322.37 Rs. Three Hundred

depth for brick masonary chamber for 600mm x 850mm size. Twenty Two & Paise

Thirty Seven Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

63 Provinding and laying inegrated cement based proofing treatment of required thickness 426.00 Sqm 920.61 Rs. Nine Hundred

over the roof including 10mm thick waterproofing cement plaster in cement plaster in Twenty & Paise Sixty

cement mortar1:3 and chaina mosaic fitting and finally finishing the surfase with white One Only

cement slurry and slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near rainwater outlet or

the lowest point of the finishedslope shall not be less then 45mm, including treating the

vertical surfaseof the parapet wall up to 20cms . height above finished level of terracing

including finishing the top with joint less water proofing plaster , curing , testing etc.

complete. Rate is including ten years performance of guarantee bond to be given on stamp

paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50% of

cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement plaster

in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water proofing

compound conforming to IS 2645 to required slope and treating similarly the adjoining walls

up to 200mm height incl. rouding of junction of walls.

(C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less cement

plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

(E) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer In

64 Cleaning Manhole by removing sludge silt with the help of rope,brass etc.complete for any 15.00 Nos 300.00 Rs. Three Hundred

depth of manhole /I.C chamber Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

65 Cleaning of pipe line of any diameter upto 150mm including all Labour, Required 30.00 Rmt 150.00 Rs. One Hundred Fifty

tools,tackles and disposing of all debris as directed by E.I.C Only

66 Providing and fixing precast R.C.C.cover including angle frame of 40mm x 40mm x 3mm 10.00 Nos 1932.00 Rs. One Thousand Nine

section and C.C.1:1.5:3 precast I.C.cover for chamber etc. including 8mm dia. H.Y.S.D. steel Hundred Thirty Two

at 15cm c/c both way and oil painting of angle frame and finishing of concrete with C.M.1:3 Only

etc. complete. Finished dimension of cover shall be 0.60 x 0.60 x 0.07 mt size. Rate are

inclusive of cost of angle frame reinforcement concrete finished work and two pieces of M.S.

flat 25 x 3mm size as a handle.

67 Provinding and fixing water Closet Squatting (ORRISSA TYPE W. C PAN ) size 580mm first 20.00 Nos 1028.45 Rs. One Thousand

quality including necessary "P" or "S" trap, including jointing the trap with pan & soil pipe in Twenty Eight & Paise

viterous chine white colour, Joints shall be pipe sealent. All material shall be aprroved make Forty Five Only

list of GSPHC only.

68 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt Rubber mounted 141.00 Each 182.83 Rs. One Hundred

for Pipe Supporting Clamping System for External Vertical Fixed line with wall distance 3 Eighty Two & Paise

including nuts, bolts, fastners etc complete as per detailed Specifications and as directed by Eighty Three Only

Engineer in Charge.

69 Providing Supplying and Fixing S4 Channel System (S4 Channel+ Profile Bracket U Bolt 84.00 Each 421.58 Rs. Four Hundred

Rubber mounted System) for multiple Pipes for External Vertical Fixed line with wall Twenty One & Paise

distance 3" including nuts, bolts, fastners etc complete as per detailed Specifications and as Fifty Eight Only

directed by Engineer in Charge.

70 Providing and Fixing 3mm thick Acrylic Sheet with Vinyl letter colour-2073-Dark grey for 1.50 Sqmt 7193.88 Rs. Seven Thousand

back ground and colour-2199-white letter with required screws… etc as per required sizes One Hundred Ninety

complete etc as per specification & instruction of Engineer incharge. Three & Paise Eighty

71 providing and corrogulated JSW pre coated sheet roofing fixed withh galvanised iron J or L 191.00 Sqmt 1022.75 Rs. One Thousand

hooks, bolts and Nuts 8 mm dia with bitumin and G.I. Limpet washer or G.I. limpet washer Twenty Two & Paise

with white lead complete excluding the cost of Purlines , rafters and trusses(0.60mm thick) Seventy Five Only

ALL material Shall be used as per approved material list by GSPHCL.

Total Civil.Amount (Rs.)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

72A Providing and fixing Point wiring with 1.1 KV grade ISI marked approved make 2 x 1.5 60.00 Point 291.00 RS: Two Hundred

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS Ninty One only

wire for earth continuity in exiting FIA approved ISI mark white colour medium class

20/25 mm dia. embossed rigid PVC pipe erected flushed in wall/ceiling complete with

company fabricated Metal Groove PVC fitting fixed with adhesive solution erected in wall

along with continuous G. I. fish wire to draw wires complete with approved make 5/6 Amp.

tissino type switch and accessories mounted On Metal / PVC/Wooden Box covered with

mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling

rose / H.D.Connector as directed as directed for future extention , if required agency has to

erect one higher size box & plate as per instruction of EIC. cost of blank plate shall be paid

as per tender itemFor Light Point-In existing medium class Rigid PVC pipe and

accessories erected Concealed in wall/ceiling complete

72B For Fan Point--In existing medium class Rigid PVC pipe and accessories erected Concealed 10.00 Point 291.00 RS: Two Hundred

in wall/ceiling complete Ninty One only

72C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI Make)--In existing 20.00 Point 259.00 RS: Two Hundred

medium class Rigid PVC pipe and accessories erected Concealed in wall/ceiling complete Fifty Nine only

72D For loop on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI Make) 120.00 Point 66.00 RS: Sixty Six

73A Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick 50.00 Each 217.00 RS: Two Hundred

PC (Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. Electronic Seventeen only

Hum free EME Socket Type 5 Steps Fan Regulator

73B One no Single pole 6 A Switch / Bell push 150.00 Each 31.00 RS: Thirty One

73C One no 3/5 pin 6 A Socket 100.00 Each 31.00 RS: Thirty One

73D One no Single pole 16 A Switch 20.00 Each 47.00 RS: Forty Seven

73E One no 6/16 A Universal Socket 20.00 Each 47.00 RS: Forty Seven

73F One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with indicator 20.00 Each 124.00 RS: One Hundred

& fuse Twenty Four only

73G Bakelite ceiling rose 50.00 Each 18.00 RS: Eighteen

73H Bakelite lamp holder 50.00 Each 22.00 RS: Twenty Two

74 Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed 4000.00 Sq. 2.00 RS: Two only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

75 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 200.00 Mtr. 24.00 RS: Twenty Four

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction only

boxes fixed with adhesive solution & clamps on / in wall / ceiling along with continuous fish

wire to draw mains with necessary fittings and junction boxes for following dia. (a) 20 mm.

76A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade In 250.00 Mtr. 46.00 RS: Forty Six

Existing FIA approved ISI mark medium class 20/25 mm dia. embossed rigid PVC pipe only

with PVC fitting fixed with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with plastering by cement

mortar & finishing the surface to match the wall / ceiling complete with FRLS PVC insulated

wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for

earthing as per standard colour code.(In Existing 20/25mm Pipe) [Wire must be having

box packing](Conductor resistance should be as per IS:8130/1984 )

76B For 2 X 6.0 sq.mm. copper multi stranded conductor mains with 2.5 sq. mm copper multi 100.00 Mtr. 120.00 RS: One Hundred

stranded conductor earthing as per standard colour code ---(In Existing 20/25mm Twenty only

Pipe)[Wire must be having box packing](Conductor resistance should be as per

77 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary 150.00 Mtr. 37.00 RS: Thirty Seven

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

78 Providing & Erecting 1.0 mtr long Earthing system by making minimum bore of 150 5.00 Each 5785.00 RS: Five Thousand

mm dia in soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing Seven Hundred Eighty

electric rod must be made from Corrosion free Hot dip galvanizing pipes having Five only

following specification. Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt.

Agency has to maintain earthing & its value during defect liability. If required.

(A) Earthing Electrode Outer Pipe:- 88mm O.D, Outer Pipe wall thickness :- 2.6mm

minimum, Inner pipe:- 42mm O.D, Pipe thickness:- 2.5mm, Terminal Size:-

mmX100mm length, Zinc coating(Hot dip galvanising):- 75-100 micron, Nut bolt:- 2 no.

with washer suitable for 14mm dia, total minimum Weight (approx) of earth electrode

with inside conductive material 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain moisture for

min.1year weight(appro.) of earth electrode with inside conductive material is 15 Kg.

(D) Chamber and cover :-Earthing chamber should be size of 400mmX400mmX400mm

depth and Cover should be heavy duty cast iron with required size of 300mmX300mmX4mm

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for approved

before supplying

Water must be poured in bore before starting earthing. Earthing value must be measured

with earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage

between neutral &Earthingupto 02 volt. Agency has to maintain earthing& its value for one

year. If required. Earthing must be done in the presence of A.E (GSPHCL)

79 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft 5.00 Each 276.00 RS: Two Hundred

soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Seventy Six only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

80 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 250.00 Each 370.00 RS: Three Hundred

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Seventy only

Aluminum extrusion having enough strength (sample must be approved by EIC) with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and frequency: 220V to

VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp(E) Power

Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT:

6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection :

Min. 2KV(N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse

Polarity Protection must be provided(Q) Fixing clamp design & strength should be sufficient

to hold the fitting erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit

yrs free replacement Guarantee for complete Fixture) [Approval will be given strictly

subject to item specification]

81 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 30.00 Each 1929.00 RS: One Thousand

50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Nine Hundred Twenty

Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) Nine only

RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of

heavy duty premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Min. 1.5 MFD (15%

Tolerence) as per IS:1709-1984, (14) Down road: up to 1.0 mtr as per site requirment, (15)

Required fixing accessories, (16) 3 core 0.50 sq.mm ISI wire as per site requirment, (17) No

vibration and noise due to mechanical parts. (18) Safety wire provided by manufacturer with

ceiling fan. (Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM has

to approved model as per tender specification and tested at ERDA)

82 Supplying & erecting approved make low noise Decorative exhaust fan having size 200 mm 24.00 Each 1687.00 RS: One Thousand

with 1350 RPM with round / square frame ABS/metalic body with Grill and inbuilt lowers. Six Hundred Eighty

(Bajaj, Crompton, Usha Make Only) Seven only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

83 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 x 2.00 Sq. 2289.00 RS: Two Thousand

3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy Mtr. Two Hundred Eighty

meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. of Nine only

Energy meter & ICDP switch -busbar etc. as per Actual space available in electrical room at

84 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to 4.00 Each 69.00 RS: Sixty Nine

be erected as per I.S. only

85 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 455.00 Mtr. 117.00 RS: One Hundred

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra Seventeen only

violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as per original. (A)For

Outer dia.50mm and Inner dia. 38mm (Test Certificate to be Submitted)

86 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper 550.00 Mtr. 361.00 RS: Three Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Sixty One only

of following size of cables. (C) 4 core 4 Sq. mm

87 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor 50.00 Mtr. 139.00 RS: One Hundred

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. Thirty Nine only

heavy guage 1.0mm thick cable clamp or in existing DWC pipe underground or road

crossing or floor. For 4 core 10 Sq. mm

88 Providing & fixing double compressed heavy duty flange type brass cable gland with 120.00 Each 48.00 RS: Forty Eight

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating only

tape etc. For following size cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI,

Comet Make Only)

89 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC 6.00 Each 57.00 RS: Fifty Seven

insulated armoured cable complete with out going tails, insulating tape etc for following size only

of cables. (C) 2 to 4 core 10 Sq. mm

90 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for 400.00 Each 8.00 RS: Eight only

cable of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved manner. [a]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

91 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 30.00 Each 13.00 RS: Thirteen

following size evenly crimped with high pressure tool & connected to switchgear only

terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm

92A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 150.00 Mtr. 141.00 RS: One Hundred

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 Forty One only

erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. For One wire 16.00 Sq.mm (Conductor resistance should be as per

92B For One wire 6.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 ) 50.00 Mtr. 56.00 RS: Fifty Six

93 Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by 10.00 Mtr. 171.00 RS: One Hundred

Engineer-in-charge. For 25 mm dia. Seventy One only

94 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole 5.00 Each 6917.00 RS: Six Thousand

should be made as per IS. and shall be coated with hot dip galvanizing as per IS Nine Hundred

2629/2633/4759, suitable suspend local wind speed with integral Junction box with Hot Deep Seventeen only

Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with silicon

rubber gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile 35 mm X

7.5 mm Din-Rail & MCB, Brass stud type terminal and arrangement for cable termination to

be erected on RCC foundation as per details given by manufacturer and EIC considering

site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

(3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering / farma, (6)

Hot deep galvanized average 70 Micron, (7) Detail drawing will be given by corporation

(D) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg(if Required)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

95 Coil type earthing, coil made from 8 SWG galvanised iron wire with 50 mm OD and 50 turns 3.00 Each 369.00 RS: Three Hundred

(length of turns approx. 200 mm) and having additional continuous streight length of 3.00 Sixty Nine only

mtr at open end and should be connected to earthing bolt and burried in 1.5 mtr deep

specially prepared earth pit complete with salt and charcoal/coke as required for coil type

earthing. (Approx weight of coil 1.0 to 1.1 Kgs)(3 Nos Near Comandant office exisitng Pole

and 5 nos if Required 5 Mtr Octagonal Pole)

96A Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 250.00 Mtr. 46.00 RS: Forty Six

copper wires of following size to be erected as directed. For 3 core 1.5 sq.mm. PVC only

insulated round copper wire ISI mark.

96B For 2.50 Sq.mm 3 core round PVC sheathed 80.00 Mtr. 77.00 RS: Seventy

97 Providing and Erecting Supplying and erecting Fabricating terminal box made from 16 55.00 Each 702.00 RS: Seven

SWG M.S. sheet having following size complete with fixing arrangement for terminal board, Hundred Two only

with necessary hole for wire entry and exit from the box. The box shall be provided with

cover and hinges on one side and bolting at other end The box shall be fixed by clamps

fabricated from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and

two coats of paint having following box size 330 mm x 260 mm x 140 mm (depth). And

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm. bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead paint.

98 Providing, erecting, fabricating the M.S. structure as per requirement of site as per structure 58.00 Kg. 75.41 RS: Seventy Five

design Including proper size approved by EIC of M.S. angles, flats, bars, square pipe, and Paise Forty One

channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding, grinding and only

finishing duly painted with Asian/Nerolac make premium quality oil paint and true

careyellow zinc primer,asian paint make with erection on site as per direction of engineer in

charge with necessary grouting cementing, plastering and finishing complete. All hole

opening of square pipe end must be closed with M.S plate welding. Payment will be done on

KG as per Actual weight. (If Required)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

99 SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of Max. 45 40.00 Each 3512.00 RS: Three Thousand

W with broad single piece die cast aluminium housing of broad size for better thermal managment Five Hundred Twelve

(Appr.by EIC) , LED's mounted on high quality metal core PCB with extremely precison designed

heat sink complete with IP66 protection Class with polycarbonate / Toughned glass cover. the fixture

should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines

with high power LED module min. 130lumen/watt with toughen Glass L70 at 50,000 hrs, provided

with individual high quality polycarbonate lenses for better light distribution. The watt capacity of

each LED must be 4> watt in street light fitting The Fixture Should be able to be Pole Mounted and

also bracket mounted, provided with high quality driver for protection against mis Wiring,over

voltage high and low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD

of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the following technical

criterias Oprating range Voltage 160 to 270 V, system efficiency > 110 lm/w,Operation current

700ma, and Lumen Output of mini. 4950 Lumes, CCT > 5000K, CRI > 65, seperate high quality

lense,beam angle 120 deg, surge immunity level at least 10 KV non integral & 4 KV intrgral The

Sperate Potted driver should have over current, short circuit protection so that the fixture recovers

once the fault is removed, over voltage protection. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

[Note:-The manufacturer / authorised Channel partner of the manufacturer has to submit 5 yr free

replcement Guarantee for complete Fixture] Model approved by Engineer in Charge subject to

above Specification.[Approval will be given strictly subject to item specification]

100 Providing and Fixing SITC of Outdoor aesthetically designed LED Street light Light 29.00 Each 6117.00 RS: Six Thousand

Luminaire with total consumption of Max. 90 W with single piece die cast aluminium housing, One Hundred

high power LED shall be mounted on high quality metal core PCB with extremely precison Seventeen only

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen Glass

L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light

distribution. The watt capacity of each LED must be 4> watt in street light fitting. The

Fixture Should be able to be Pole Mounted and also bracket mounted, provided with

high quality driver for protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver should be less than 10%

and P.F > 0.95. Also the Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not less

then 9900, CCT > 5000K, CRI > 65, beam angle 120 deg, 4kV integral & non integral

surge immunity level at least 10 KV non integral..The Separate Potted driver should

have over current, over voltage protection, short circuit protection so that the fixture

recovers once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5yrs free replcement Guarantee for complete Fixture)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

101 Providing and Fixing SITC of Outdoor aesthetically designed LED Street light Light 8.00 Each 6701.00 RS: Six Thousand

Luminaire with total consumption of Max. 120 W with single piece die cast aluminium Seven Hundred One

housing, high power LED shall be mounted on high quality metal core PCB with extremely only

precison designed heat sink complete with IP66 protection Class with polycarbonate /

thoughened glass cover the fixture should be suitable for pole/bracket mounting. The fixture

to comply both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better

light distribution. The watt capacity of each LED must be 4> watt in street light fitting.

The Fixture Should be able to be Pole Mounted and also bracket mounted, provided

with high quality driver for protection against high and low Voltage cut Off, opertional

for high amibient and high humid envirnoments, THD of driver should be less than

10% and P.F > 0.95. Also the Fixture should meet the following technical criterias

Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens

not less then 13200, CCT > 5000K, CRI > 65, beam angle 120 deg, 4kV integral & non

integral surge immunity level at least 10 KV non integral..The Separate Potted driver

should have over current, over voltage protection, short circuit protection so that the

fixture recovers once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to

90% RH. (Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5yrs free replcement Guarantee for complete Fixture)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

102 Providing and Fixing SITC of Outdoor aesthetically designed LED Flood light Light 2.00 Each 6228.00 RS: Six Thousand

Luminaire with total consumption of Max. 90 W with single piece die cast aluminium housing, Two Hundred Twenty

high power LED shall be mounted on high quality metal core PCB with extremely precison Eight only

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket mounting. The fixture to comply

both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen Glass

L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light

distribution. The watt capacity of each LED must be 4> watt in street light fitting. The Fixture

Should be able to be Pole Mounted and also bracket mounted, provided with high quality

driver for protection against high and low Voltage cut Off, opertional for high amibient and

high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the

Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V,

system efficiency >= 110 lm/w, and total lumens not less then 9900, CCT > 5000K, CRI >

beam angle 120 deg, 4kV integral & non integral surge immunity level at least 10 KV non

integral..The Separate Potted driver should have over current, over voltage protection, short

circuit protection so that the fixture recovers once the fault is removed. In addition to the

above product should be operational in the temperature range of 0 deg to 50 deg and

humidity range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel partner of

the manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture)

103 Providing & Erecting Univesal Astro interlligent Street light Control System insu with 4.00 Each 12895.00 RS: Twelve

weather proof box for indoor allplication 5KVA ( as Per atteched Specification) Thousand Eight

Hundred Ninty Five

104 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 4.00 Each 1104.00 RS: One Thousand

having 10KA breaking capacity & confirms to IS :8828 with same company metal box One Hundred Four

with earthing terminal having following capacity with necessary Numbering with oil only

Paint by painter. [c]40 Amp. Cat.-III (For Street Light )

105 Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding 50.00 Mtr. 488.00 RS: Four Hundred

power supply by making up to following size of holes at both ends complete. (A) Up to 100 Eighty Eight only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

106 Supplying and erecting street light pole bracket bracket consisting of ISI mark "B" class G.I. 38.00 Each 487.00 RS: Four Hundred

A Pipe 4.2 cm outside diameter complete with suitable B class G.I./M. S. Sleeve tubing of 2 Eighty Seven only

mm. thick and required size and approx. 45 Cms length suitable for 76.5 / 80 mm. required

size of pole top having nuts and bolts for fixing the brackets and having spread of Upto

mtr. length with 110 deg. with vertical plane and suitable welded stiffner reducer and nipple

with check nut complete painted with one coat of red oxide and two coats of alluminium

paint. or Single arm bracket suitable for terrace as per design given by EIC (a) For single

arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Ambica

/ Fab / Bajaj / Impression equipment Only) (Test certificate to be submitted)

106 For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- 2.00 Each 616.00 RS: Six Hundred

B Ambica / Fab / Bajaj / Impression equipment Only) (Test certificate to be submitted) Sixteen only

107 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) 10.00 Each 327.00 RS: Three Hundred

having 10 KA breaking capacity & confirms to IS:8828 in existing box having following Twenty Seven only

capacity. For 40 Amp.

108 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable 60.00 Each 111.00 RS: One Hundred

to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Eleven only

existing box. confirming to IS 8828/1996 with ISI Mark.

109 providing and erecting Approved make RCCBs conforming to IS: 12640 and having 15.00 Each 2213.00 RS: Two Thousand

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation Two Hundred Thirteen

on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance only

feature & do not incorporate any electronic component. for following Max. rating erected as

directed. (ii) 40Amps. DP

110 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel 15.00 Each 272.00 RS: Two Hundred

duly powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals Seventy Two only

for following type of RCCB, RCCB + MCB [a] For 2 pole

111 Providing and erecting Approved make Four pole moulded case circuit breaker having 2.00 Each 6723.00 RS: Six Thousand

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Seven Hundred Twenty

with Fixed/ Variable thermal & magnetic release suitable to work on A.C. supply 50 c/s. Three only

with all internal connections, spreader tinned copper & complete erected with 16 G.M.S.

housing. ICS=100% of ICU only

Total Electrical.Amount (Rs.)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Signature of contractor Executive Engineer.

Gujarat State Police Housing Corp. Ltd.