Construction of Boundary wall and shed of Gosala at Godhuli in ward no-01 of Champua NAC (MSBY)

Earth work in excavation of foundation in hard soil or Gravelly soil within 50 m initial lead & 1.50 m initial lift including levelling & dressing the bed & lifting the excavated materials within 50 m lead clear from work site including cost of all labour, T & P, cess etc. all taxes complete

Filling sand in foundation & plinth well watered & rammed including cost , conveyance to site , royalty , cess etc all taxes of all materials & cost of all labour complete

C.C. ( 1 : 4: 8) using 40 mm size (H.B) metal free from weathered skin & all foreign materials including lowering, laying the concrete, watering and curing etc. and including cost , conveyance to site , royalty , cess etc. all taxes of all materials & cost of all labour complete .

R.C.C. work in M 20 grade of concrete using 20 mm & down graded size hg chips including hoisting & laying the concrete,watering and curing etc.complete to required levels laid in layer including cost,conveyance to site , royalty , cess etc. all taxes of all materials & cost of all labour complete & including cost of centering and shuttering but excluding conveyance & labour charge for cutting , bending, binding etc. A) GOSALA

( C) Columns

Suplying , fitting & placing in position uncoated HYSD bar reinforcement for RCC work including cutting ,bending ,binding & placing in position including cost & conveyance to site,cess etc. all taxes of MS/ TS Rod & binding wire 18to 20 gauge etc.all complete .

Brick masonry in C.M ( 1 : 6 ) using F.A. bricks from any approved quarry & watering and curing etc. including cost , conveyance to site , royalty , cess etc. all taxes of all materials & cost of all labour complete A)In F/P

In Superstructure

C.C (1:2:4) in road work using 12 mm to 20 mm size CBHG stone chips of approved quality and from approved quarry including laying in the layers not exceeding 150 mm thick including hoisting-lowering, laying, compacting concrete with vibrator, watering and curing with all cost, conveyance, royalities T&P etc all complete as per direction of the Engineer-in-Charge.

12 mm thick CP (1 : 6) over brick masonry after racking out the joints & watering and curing etc. including cost , conveyance, royalty, cess etc all taxes all complete .

White washing with shell lime two coat with cost of all materials

Wall painting 2 coats to walls with wether coat of any approved shade on New work after cleaning the surface including watering & curing etc. complete including cost of weather coat & cost of all labour and cess with T & P. required for the works etc. all complete

Supplying , fitting & fixing of M.S.fram Gates of approved design & size using 75 mm MS square bar framed & both side bar with 32 mm size middle bar provided with horns or W.I. Clamps to be fixed in wall & all locking arrangements fixed in position to walls including cost , conveyance , royalty , cess etc. all taxes of all materials all complete .

Supplying , fitting & fixing of M.S.Angle framed Grill of approved design & size fixed in position to walls including cost , conveyance , royalty , cess etc. all taxes of all materials all complete .

Labour for fitting and fixing of M.S. Gates as per approved design including cost of all materials complete

Labour for fitting and fixing of M.S. grills including cost of screws complete

Supplying all Materials ,Labour and T& p for Providing Mild Steel tubular posts and Trusses and base plates made out of ERW tubes, Grade YST 210 conforming to ISS no.1161/79 (3rd Revision ) duly Painted with red oxide primer including cost of nuts & bults washers fabrication charges, all labour ,T&P etc complete.(A) 91.50 mm square MS Pipe 4.5mm thick of post

Hoisting Joint and Trusses and Placing in Position etc all the work complete as directed by the Engineer-in-charge.

M.S. fabricated conjugate truss for placing over R.C. C. Column with Anchor Plate and bolt with rafters and purling windies including cost of all materials, labour T&P electric are welding, chiseling for removal of welding stags, using plate hammer and wire brush, grinding of joints and leathe works to shape the truss in required manner after releasing the welding stress etc complete.

Labour for Fitting and Fixing & Profile sheet of TATA Brand 0.47 mm tick in roof drilling hole in wind tiles including fixing of ridges valleys wind tiles including cost of materials , labour for fixing etc all complete

Supplying Fitting and Fixing of iron Ridge and Gutter for complete

Painting two coats over a coat of priming to steel surface after scraping & cleaning the surface including cost , conveyance , royalty , cess etc. all taxes of all materials all complete .

110mm diaP.V.C. Bend

110mm diaP.V.C. Pipe

Carrage of excavated earth by mechanical means 5km away from sites as per the direction of Engg-in-charge.

Supplying all labour , T & P , etc. for preparation of Display Board including painting , writing & fixed in position at proper place & Provision Photto graphs at different stage of execution of the work including cost of all materials, labour cess etc. & cost of all labour complete .