Supply of Steel Fabrication items, Hardware Stores and Tools for construction of stone structures

Steel Fabrication stores at Mana Loc

SRT 2100MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets, pre painted with two coats of OG colour over one coat of red oxide. Make:SAIL/TATA/ISPAT/JINDAL with 8 Nos of capsule shaped hole having 10MM dia and 20MM length.

ISMB 250 (3400 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

ISMB 150 (1200 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

ISMB 150 (1000 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

TMT bar 8mm "confirming to IS - 1768 (2008) and Make: SAIL/TATA/ISPAT/JINDALSTEEL

View Port of size 600x500 mm will be provided with purpose made ‘U’ channel frame. A trapezoidal frame as per the drawing shall be made of angle iron 50x50x6 mm, 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick MS sheet on four sides except outer and inner opening with 4 Nos hold fast size 200x50x6 mm flat iron two on either side with MS shutter made of 8 mm thick MS plate 300x480 mm 02 Nos with sliding slit of 75x75 mm on one shutter. The shutters should be fixed with required nos of heavy duty box hinges of 10 mm size. With the dimension of the outer opening of the View Port box being 900mm x 800mm. MS tower bolt 2 Nos 16 mm dia 200 mm long to be provided to shut the shutters. The shutters should be sliding type and 3 mm thick MS sheet to be welded at ends on both sides. Edges of the View Port to be chamfered evenly. All steel parts shall be conforming to IS-226 & pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT /JINDAL branded iron parts to be used for the loophole fabrication.

Steel door of size 900x1800 mm shall be provided as per drawing. Main frame work shall be of MS angle 50x50x6 mm. MS sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. The door shall be open-able inwards. The door shall have sliding opening 900mm x 250mm made of 14 guage MS sheet with handle, with 04 Nos 12mm dia guard bars at 1200 mm from bottom. Necessary handles and other fittings will be provided both sides of door. The door frame will have 06 Nos hold fast 200 mm long made of 50x6 mm flat iron. Job No will be engraved on the inner side. All steel parts shall be conforming to IS-226 and pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/ JINDAL branded iron parts to be used for the door fabrication.

10 mm dia bolts with nut & Bitumen washer 150mm long with ISI mark for fixing SRT

Hardware stores at Mana Loc

Polythene sheet colourless 2mm thick and weight of sheet shall not be less than 50 gm/sqm

Polythene sheet black 2mm thick and weight of sheet shall not be less than 70 gm/sqm

Lightning conductor (Jelly filled) complete set, Make - RADIANCE/POWERCON/ENNOV/ASHLOK or as per IS 2309 standards. (1 Set having fwg accessories) (a) Prongs complete set made out of alumn conduct 20mm dia 450mm long with stand/base plate with minimum thread 1"ISI Mark - Set 01, (b) Wooden block size 150x150x120mm - Nos -10, (c) Aluminium strip 25mmx3.15mm wide with fixing screws for roof conductors of ISI Mark- Mtr - 30, (d) Clamp for fixing of aluminium stirp with wooden block Nos-40, (e) Chemical earthing electrode inner dia 40mm, length 2000mm, conductor size 25 x 3mm, wt of back fill compound 25 Kg, load bearing capacity 50KVA, Make : RADIANCE/POWERCON Nos-01, (f) CI S cover and pit - Nos-01

20 mm dia PVC conduit with bends. Make : SHALIMAR/DAULPHIN/PRESTO PLAST

HDPE Sand bags with thin plastic inner, Length -630mm & Width-350mm & Weight-80 gms minimum, Colour - Sand

Jute Sand bags with Length-630mm & Width-350mm & Weight-80 gms minimum, Colour – 50% sand and 50% OG

Binding wire 0.9mm dia. Make : SAIL/TATA/ISPAT/JINDAL

Hessian Cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter

Cover Water Proof 225 sqft (Make - SHALIMAR / CENTURY)

Tools at Mana Loc

Crowbar hexagonal 1200mm long x 40mm dia Make: TAPARIA/TATA/JINDAL

Round nose Shovel hand GS 12" 1.6 Kg with handle pointed.

Axes Picks 3 Kg head with 02 x addl spare rubber grip handle per axes Make : TAPARIA/TATA/JINDAL.

Cross and straight peen hammer 500 gm with 02 x addl rubber grip handle per hammer.Make : TATA/STANLEY/TAPARIA

Round nose Phawara 11"x11.5"x8.5", 1.5 kg with 02 x addl spare handle Make: TAPARIA/TATA/JINDAL

Pan Motor (Tasla) 18" dia

Trawl Brick 250mm Make : TAPARIA/TATA/JINDAL ENGINEERING

Wooden Gurumala

Plumb bob steel Make : TAPARIA/TATA.

Steel Gurumala 152mm with rubber grip Make : TAPARIA/TATA/JINDAL

Ball pane Hammer 500gm with ISI Mark with 02 x addl rubber grip handle per hammer.

Chisel cold 2 Kg Make : TAPARIA/TATA/JINDAL

Scissor of size 300mm long for cutting of PBS Roll Make : TATA/SAIL.

Set of bits for Drill Machine GSR 12-2 Professional (consisting of 10bits) Make : Taparia/Bosch/TATA.

Plier side cutting Make : TATA/EVEREST/PYE /TAPARIA

Hand Gloves Rubber

Water level pipe for masonry work

Spirit Level 10"

Mason thread 100m

Wire mesh for sieving sand (8'x5') with 20 running feet of wood scantling for on site fabrication of mesh frame.

Rope 16mm 50 mtr (Jute Rope).

Adjustable spanner 10" Make:TAPARIA/EVEREST/FISHER/TAPARIA

Spanner OJDE 14x15mm

HDPE tank of Capacity 500 Ltr Make: SINTEX/SFMC/NATIONAL PLASTIC

Aluminium stud 6' long

Sledge hammer 4 Kg with grip handle. Make: TAPARIA/TATA/JINDAL.

Measuring steel tape 5M long retractable grade AI-16

Measuring tape 30 m

Painting brushes 3” size nylon straight smooth bristles bonded properly and best quality

Portable welding set Make:ELECTRA/AKIRA/BMB

Cutter Machine make Bosch with iron cutter blade, cutter blade and wood cutter blade 05 Nos each Make: Bosch and equivalent make

Steel cutter blade

Working Gloves As per sample approved

Working Goggles As per sample approved

Freeman/Fisco Pacer Measuring Tape 100 RM

Electronic Cordless/Handheld battery -Powered Painting Machine Make- Tapariya/Bosch with ISI Mark.

Safety Helmet

Solar Lantern with Solar Panel used indoor and outdoor super bright will continuously work for 12-14 hours approx should have following specification:- (i) Power Source: Ac/110, 220V, rechargeable battery:6V/4.5Ah sealed lead -acid, (ii) Light source:36 pcs super bright led, 108 lumen. (iii ) Charging time:7-8 hours approx in the strong sunlight for 3W solar light and 12 hours approx for ac charging adaptor. (iv) working time: 12-15 hours after fully charged. (v) Material: plastic with protected stainless steel, (vi) dimensions: 25.5 cm hight and 13 cm width.

Steel Fabrication stores at Malari Loc

SRT 2100MM long 615mm wide, 2mm thick ISI mark hot rolled Carbon Steel Sheets, pre painted with two coats of OG colour over one coat of red oxide. Make:SAIL/TATA/ISPAT/JINDAL with 8 Nos of capsule shaped hole having 10MM dia and 20MM length.

ISMB 250 (3400 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

ISMB 150 (1200 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

ISMB 150 (1000 mm long) conforming to IS-226 pre painted with two coats of OG colour over one coat of red oxide. Make: SAIL/TATA/ISPAT/JINDAL.

TMT bar 8mm "confirming to IS - 1768 (2008) and Make: SAIL/TATA/ISPAT/JINDALSTEEL

View Port of size 600x500 mm will be provided with purpose made ‘U’ channel frame. A trapezoidal frame as per the drawing shall be made of angle iron 50x50x6 mm, 45x45x6 mm and flat iron 40x6 mm covered with 2 mm thick MS sheet on four sides except outer and inner opening with 4 Nos hold fast size 200x50x6 mm flat iron two on either side with MS shutter made of 8 mm thick MS plate 300x480 mm 02 Nos with sliding slit of 75x75 mm on one shutter. The shutters should be fixed with required nos of heavy duty box hinges of 10 mm size. With the dimension of the outer opening of the View Port box being 900mm x 800mm. MS tower bolt 2 Nos 16 mm dia 200 mm long to be provided to shut the shutters. The shutters should be sliding type and 3 mm thick MS sheet to be welded at ends on both sides. Edges of the View Port to be chamfered evenly. All steel parts shall be conforming to IS-226 & pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT /JINDAL branded iron parts to be used for the loophole fabrication.

Steel door of size 900x1800 mm shall be provided as per drawing. Main frame work shall be of MS angle 50x50x6 mm. MS sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. The door shall be open-able inwards. The door shall have sliding opening 900mm x 250mm made of 14 guage MS sheet with handle, with 04 Nos 12mm dia guard bars at 1200 mm from bottom. Necessary handles and other fittings will be provided both sides of door. The door frame will have 06 Nos hold fast 200 mm long made of 50x6 mm flat iron. Job No will be engraved on the inner side. All steel parts shall be conforming to IS-226 and pre painted with two coats of OG colour over one coat of red oxide. SAIL/TATA/ISPAT/ JINDAL branded iron parts to be used for the door fabrication.

10 mm dia bolts with nut & Bitumen washer 150mm long with ISI mark for fixing SRT

Hardware stores at Malari Loc

Polythene sheet colourless 2mm thick and weight of sheet shall not be less than 50 gm/sqm

Polythene sheet black 2mm thick and weight of sheet shall not be less than 70 gm/sqm

Lightning conductor (Jelly filled) complete set, Make - RADIANCE/POWERCON/ENNOV/ASHLOK or as per IS 2309 standards. (1 Set having fwg accessories) (a) Prongs complete set made out of alumn conduct 20mm dia 450mm long with stand/base plate with minimum thread 1"ISI Mark - Set 01, (b) Wooden block size 150x150x120mm - Nos -10, (c) Aluminium strip 25mmx3.15mm wide with fixing screws for roof conductors of ISI Mark- Mtr - 30, (d) Clamp for fixing of aluminium stirp with wooden block Nos-40, (e) Chemical earthing electrode inner dia 40mm, length 2000mm, conductor size 25 x 3mm, wt of back fill compound 25 Kg, load bearing capacity 50KVA, Make : RADIANCE/POWERCON Nos-01, (f) CI S cover and pit - Nos-01

20 mm dia PVC conduit with bends. Make : SHALIMAR/DAULPHIN/PRESTO PLAST

HDPE Sand bags with thin plastic inner, Length -630mm & Width-350mm & Weight-80 gms minimum, Colour - Sand

Jute Sand bags with Length-630mm & Width-350mm & Weight-80 gms minimum, Colour – 50% sand and 50% OG

Binding wire 0.9mm dia. Make : SAIL/TATA/ISPAT/JINDAL

Hessian Cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter

Cover Water Proof 225 sqft (Make - SHALIMAR / CENTURY)

Tools at Malari Loc

Crowbar hexagonal 1200mm long x 40mm dia Make: TAPARIA/TATA/JINDAL

Round nose Shovel hand GS 12" 1.6 Kg with handle pointed.

Axes Picks 3 Kg head with 02 x addl spare rubber grip handle per axes Make : TAPARIA/TATA/JINDAL.

Cross and straight peen hammer 500 gm with 02 x addl rubber grip handle per hammer.Make : TATA/STANLEY/TAPARIA

Round nose Phawara 11"x11.5"x8.5", 1.5 kg with 02 x addl spare handle Make: TAPARIA/TATA/JINDAL

Pan Motor (Tasla) 18" dia

Trawl Brick 250mm Make : TAPARIA/TATA/JINDAL ENGINEERING

Wooden Gurumala

Plumb bob steel Make : TAPARIA/TATA.

Steel Gurumala 152mm with rubber grip Make : TAPARIA/TATA/JINDAL

Ball pane Hammer 500gm with ISI Mark with 02 x addl rubber grip handle per hammer.

Chisel cold 2 Kg Make : TAPARIA/TATA/JINDAL

Scissor of size 300mm long for cutting of PBS Roll Make : TATA/SAIL.

Set of bits for Drill Machine GSR 12-2 Professional (consisting of 10bits) Make : Taparia/Bosch/TATA.

Plier side cutting Make : TATA/EVEREST/PYE /TAPARIA

Hand Gloves Rubber

Water level pipe for masonry work

Spirit Level 10"

Mason thread 100m

Wire mesh for sieving sand (8'x5') with 20 running feet of wood scantling for on site fabrication of mesh frame.

Rope 16mm 50 mtr (Jute Rope).

Adjustable spanner 10" Make:TAPARIA/EVEREST/FISHER/TAPARIA

Spanner OJDE 14x15mm

HDPE tank of Capacity 500 Ltr Make: SINTEX/SFMC/NATIONAL PLASTIC

Aluminium stud 6' long

Sledge hammer 4 Kg with grip handle. Make: TAPARIA/TATA/JINDAL.

Measuring steel tape 5M long retractable grade AI-16

Measuring tape 30 m

Painting brushes 3” size nylon straight smooth bristles bonded properly and best quality

Portable welding set Make:ELECTRA/AKIRA/BMB

Cutter Machine make Bosch with iron cutter blade, cutter blade and wood cutter blade 05 Nos each Make: Bosch and equivalent make

Steel cutter blade

Working Gloves As per sample approved

Working Goggles As per sample approved

Pouch with tools Make:STANLEY/TAPARIA :- (i) Measuring tape 5Mtr - 01Nos (ii) Google / Eye shield - 01 Nos (iii) Carabiner - 01 Nos (iv) Ball Peen hammer - 01 Nos (v) Screw driver - 02 (vi) (01x Crosshead and 01 x flathead) (vii) Cutting Plier - 01 Nos (viii) Led Torch (2cell) with 4 cell. - 01 Nos

Freeman/Fisco Pacer Measuring Tape 100 RM

Electronic Cordless/Handheld battery -Powered Painting Machine Make- Tapariya/Bosch with ISI Mark.

Safety Helmet

Solar Lantern with Solar Panel used indoor and outdoor super bright will continuously work for 12-14 hours approx should have following specification:- (i) Power Source: Ac/110, 220V, rechargeable battery:6V/4.5Ah sealed lead -acid, (ii) Light source:36 pcs super bright led, 108 lumen. (iii ) Charging time:7-8 hours approx in the strong sunlight for 3W solar light and 12 hours approx for ac charging adaptor. (iv) working time: 12-15 hours after fully charged. (v) Material: plastic with protected stainless steel, (vi) dimensions: 25.5 cm hight and 13 cm width.

High head water pump:- (4 Stroke air cooled horizontal shaft, Single Cylinder Engine) and all other connected fittings complete of ISI mark. Provide operating manual, user hand book and tool kit complete. Pump should have following specificatios:- PUMP :- (i) Discharge- Min 18 Cum/hr at vertical head of 350mtr and 500 mtr at a Min slope of 70 degree. (ii) Discharge pressure- 50 Kgf/ CmSq (iii) Suction head-3m Engine :- (i) Side valve, 4 stroke, air cooled, horizontal shaft, single cylinder. (ii) Petrol start kerosene run. (iii) Min horse power-5.5 HP/3600RMP. (iv) Displacement- 270 CC (v) Fuel consumption shall not more than 2ltr/hr. (vi) Ignition system- contact breaker. (vii) Make : Kirloskar, Honda, Cromptom Delivery pipe:- Size - 10mm OD, Pressure - 200Kg/Sqcm, Pipe should have male female connection at end.Qty- 10 rolls of 100 mtr each Accessories/Tools:-Oil filter make : MICO-02 Nos Air filter make : MICO- 01 NosScrew driver set complete of ISI mark Make:STANLEY/TAPARIA - 01 Set Repair kit:-One standard set per high head water pump will be provided incl 10% reserve. The details must be mentioned in user hand book. 40 Nos clamp and 20 Nos two headed metal joints for leakage repair.

GAURAV SALES CORPORATIONS

ALLIED SALES CORPORATION

S.K.Traders

Ekon Technologies and Security Solutions Pvt Ltd