Construction of toilet in premises of Officer Club and Water Treatment Plant in BBMB Colony, Slapper

Amount

Earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around :- (b) For semi-conglomerate soil of the nature of pick jumper work

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. (d) Inside size 150x180 cm and 120 cm deep

Extra payble for every 0.30 mtr. Additional depth of manhole chamber in item 29.55 up to 1.80 mtr increase in depth (d) Inside size 150x180 cm

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

12.5 mm thick cement plaster 1:4

Plastering on underside of ceiling 6mm thick cement plaster 1:4

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect(A)For single rebate.

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (a) Commercial with elm or gurjan facing on both Sides with laminated core and lipped edges:- (iii) 30mm thick

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (A) 300mm x 16mm

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) ii For shutter area above 0.50 sqm

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machinescrews, complete in all respects.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting new letters and figures of black synthetic enamel paint to an even shade.

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-(ii) Wiring light point

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iv) Overall size 4sq.mm (Un-sheathed)

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-Wiring 6Amp. Plug control comprising wall socket point

Carriage of Bricks.

Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets,elbows etc.), painting with anti corrosive bitumastic paint, testing cutting, threading inside buiding complete (a) 15mm i/d

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing cutting, threading Inside building complete. (b) 20 mm i/d

Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect (ii) C.P. brass Bib cock foam flow without flange

Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(a)15mm i/d G.I. Union

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2'-6" long PVC pipe. (a)with C.P Brass Nut

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550 mm x 400 mm x 815 mm

Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. Vitreous chinaware standard white pedestal for wash hand basin.

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete.

Providing, fixing, and jointing G.I. Union Couplings (of approved make with the approval Engineer-in-charge) as per IS 1879 in G.I. Pipe lines complete in all respect.(b)20mm i/d G.I. Union

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge). Size 600mmx450mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 15mm Angle valve without flange.

Providing and fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 20mm concealed stop cock with flange

Providing and fixing in position PVC Flexibel tube connection of approved make (to the approval of Engineer-in-charge) complete in all respects. (b) PVC tube connection of size 15mm x 450mm with CP Brass nut.

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) C.P. brass towel Rails size 15mm dia 610mm long

Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. (a ) CP brass Acrylic Shelf size 560mmx130mm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. iv 110mm o/d pipe of 10 Kgf. / sqcm

Cement concrete 1:5:10 With stone aggregate 40mm gauge mixing by manual means

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

Damp proof course 4cm thick of cementconcrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Cement concrete 1:2:4 ( a ) With stone ballast or shingle (i) mixing by manual means

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted of welded or fgorged, framed window guards, barred iron doors stair case ,iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position

Cement concrete 1:5:10 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

115 mm thick brick wall in cement & sand mortar 1:5 without reinforcement in foundation & plinth

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 meters

115mm thick brick wall in cement sand mortar 1:5 without reinforcement in super structure

Centring and shuttering for sides and soffits of beam, beams launching girders bressumers, lintels

Centring and shuttering for slab of culverts for vent height up to 3.00 mtr.

Cold twisted deformed (Rubbed/ Top steel bar) bars Fe500 grade as per IS:1786-2008, for RCC works, where not including the complete rate of RCC including bending binding and placing in position complete.

Plastering on underside of ceiling 10mm thick cement plaster 1:4

Cement pointing 1:2 deep variety

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD) 500mm i/d RCC man hole cover with frame as per ISI Heavy duty

Cement concrete 1:8:16 with 40mm gauge stone aggregate mixing by mechanical means using concrete mixer volumetric type

White washing (Three coat)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface

Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (using mechanical mixture for mixing material )

Providing ,fixing and jointing ISI marked gun metal peet valves( Heavy Pattern) as per IS 778 with hand wheels ,on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete (a) 15 mm including \Gun metal peat valve heavy pattern

Providing, fixing and jointing brass valve screwed with SS/Brass ball and spindle and Teflon seats on GI pipe line including all carriages complete 15 mm i/d brass ball valve

Providing and fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect (i) C.P. brass Bib cock long nose/ long body foam flow without flange

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in built up area where width / lane from wall to wall is less than 3 mtr including trimming and dressing sides,levelig of beds of trenches to correct Grade, cutting joint holes, refilling, consolidation and watering including the cost of dewatering of rain water, diversion for traffic, right signals, providing and fixing caution boards watching fencing etc and removal of surplus oil from the site upto 15m distance complete in all respect in semi conglomerate or soil of having gravel/boulder upto 50%.

Providing and placing in position on terrace ( at all floor level) HDPE water storage tanks of approved make(to the approval of Engineer-in charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fitting of base support for tank triple layer tanks.

Providing and fixing in position automatic brass ball valves in tanks B) Brass ball cock with rod and plastic Ball 15mm i/d

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (a) G.I. tank nipple 15mm i/d

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)

Providing and fixing partition for different type of urinals. 19 to 20 mm thick Granite stone partition size 375mm x 750mm

Rajneesh Kumar (BID ID -841798)

RAJ KUMAR (BID ID -841179)

SHIV KUMAR (BID ID -843574)