SPL REPAIR TO BLDG NO T-20 H T-16 SP-64 AND SP-148A OR LIVING AT BARAMULLA UNDER GE 969 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covedring complete all as specified.

Dismantling timber scantling 40 Sqcm and over in section in any position framed work complete all as specified.

Dismantling boarding, any description fixed in any position with nails complete all as specified.

Dismantling wall and ceiling boards (Fibre, pulp, insulation etc) and boarding any thickness including cover fillets complete all as specified and as directed.

M&L second class Soft wood clean sawn as in scantling in framed work complete all as specified.

All as per above item no.5 but except timber only.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F second class softwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.

All as per above item No. 9 here but Except boarding

S&F second class softwood 20mm thick facia boarding fixed with nails in any situation planed one side with butt joints complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 6 Sqcm and n.exc 13 Sqcm complete all as specified and directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 sqcm and n.exc 25 Sqcm complete all as specified and as directed.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, walls etc complete all as specified and directed. complete all as specified and as directed.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc complete all as specified and as directed.

Complete removal of existing treatment and preparation of old painted surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Prepartion of new or previously untreated surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coat of creosote complete all as specified.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.50 Sqm and removal from site all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making B39 provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key screbbing down with water etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings any thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes complete all as specified and as directed.

M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring complete all as specified and directed.

M & L for non skid coloured printed ceramic tile 8 to 10 mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4) complete all as specified.

M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) .complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excl flushing cistern ) incl flush pipe 60 cm long. complete all as specified and directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed complete all as specified and directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and directed.

M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incluing complete all as specified and as directed.

S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

S&F CP basin mixer 15mm bore for hot & cold water supply and fixed complete all as specified and directed.

S & F soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water.

S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water.

S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified.

S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified.

S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified.

S&F 100mm bore PVC (SWR) 'T 'any radius.

S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar complete all as specified and directed.

M & L precast cement concrete trpe C-1 (1:3:6) (using 20mm graded aggreagate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar (1:4), complete, in walls complete all as specified and as directed.

M & L Rendering 10 mm thick in cement and sand mortar (1:4) on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.

S & F Mild steel TMT bars 10 mm dia and over,cut to length , bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and as directed.

All as per item No. 49 above but 5mm dia and above including 10mm dia in stirrups. complete all as specified and directed.

M&L cast in situ cement concrete Type B-1, 1:2;4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc complete all as specified and directed.

M&L for walling or random rubble,uncoursed well bounded bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m (without taking of shutters from the frame) and removal from site complete all as specified and as directed.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each all as specified and directed.

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel all as specified and directed.

S&F Aluminium handles 100 mm , cast type,anodised all as specified and directed.

S&F Aluminium handles 150 mm , cast type,anodised all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed all as specified and directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in complete all as specified.

M&L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint white or any different tint complete all as specified and as directed.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as specified and as directed.

S&F second class hardwood fillets square, rectangular in section exc 6 Sqcm & not exc 13 Sqcm complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L Non-skid ceramic tiles 7 to 8mm thick area of each tiles exc 0.18m and n.exc 0.38 Sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats, complete all as specified and as directed.

MS Cold rolled Butt hinges medium weight 75 mm long complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 200mm long Anodised Aluminium tower bolt complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple, complete all as specified and as directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick Complete all as specified & directed.

S&F in repairs curtain rails , anodised aluminium alloy with fixing brackets , stops, rollers etc. complete all as specified and as directed.

S&F for Aluminium anodised Brackets fixed in repair complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:4) on fiar faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for preparation of new surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, complete all as specified and as directed.

M&L for preparation of old treated surface of brick/stone work, concrete plastered or unplastered surface and applying one coat of cement base paint on walls complete all as specified and as directed.

All as per item No. 90 above but one coat of oil bound distemper on walls complete all as specified and as directed.

Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M & L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified, Make Hindwere/ Parry ware, complete all as specified and as directed.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore complete all as specified and as directed.

S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 110 mm bore complete all as specified and as directed.

S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed.

Removal of existing water tank and S&F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all all as specified in SSR part -I, complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore, complete all as specified and as directed.

S & F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia, complete all as specified and as directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b)One 3 pin 5 Amp switch socket outlet on independent board.

(c)One 3 pin 5 Amp switch socket outlet on same board with accessories.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.

S&F switch piano Flush type, single pole 15 amp 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 3 pin, 5 and 15 Amps, flush type with gang box universal complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type, complete all as specified and directed.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F Distribution Board, SPN, 8 Way,Double door complete all as specified and as directed.

S & F in repairs MCB, SPN 40 Amps 240 Volts B curve, complete all as specified and as directed.

S & F in MCB, SP 6-32 Amps 240 Volts B curve, complete all as specified and as directed.

S&F exhaust fan/brisk air fan of size 300mm sweep, non matallic complete all as specified and as directed.

S&F in repair LED Lamp 10 W complete all as specified and as directed.

Supply and fixing LED fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed. (Note :- Old UNSV Geyser deposited in MES Store)

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note:- The rate is inclusive of neccessary earth work, RFR and removal etc.

Taking down & dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, split pins, screws, nuts and spring washers complete including, flexible chord of 24/ 0.20mm with neccessary connector (for blade/ body) as required after rewinding complete all as specified and as directed. Note : Spares used and rewinding shall be measured and paid separately under relevant item.

M&L for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, FRLS as earth wire, fixed on wall / ceiling complete. Note- 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

S&F in repairs stepped type electronic fan regulator for ceiling fan 1200/1400mm size,230 volts,6 Amps, complete all as specified and directed by Engineer-In-Charge.

S&F in replacement LED Mirror Light 10W,Decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and as directed. Havells Cat part No LHEXACP5IN1W010 or equivalent in Bajaj or CG

S&F ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs 6.5W LED complete all as specified and as directed. Havells Cat part No LHEXCGP7IN5W006 or equivalent in Bajaj or CG

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150mm complete all as specified and as directed.

S & F in repairs MCB, SPN 40 to 63 Amps rating 240 Volts 10KA 'C' curve complete with connection testing and commissioning complete all as specified and as directed.

Supply, Laying, connecting/ Jointing, charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098 laid in trenches/ducts/fixed to wall/roofs/poles all as specified of size 3.5 Core 35 sq mm including Taking out old unserviceable cable from any space

Supply, Laying, connecting/ Jointing, charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098 laid in trenches/ducts/fixed to wall/roofs/poles all as specified of size 3.5 Core 50 sq mm including Taking out old unserviceable cable from any space

Supply, Laying, connecting/ Jointing, charging, testing and commissioning LT cable electric, XLPE insulated, armoured, PVC sheathed, heavy duty, electric cable 1100 Volt grade with stranded aluminum conductor conforming to IS :7098 laid in trenches/ducts/fixed to wall/roofs/poles all as specified of size 2 Core 25 sq mm including Taking out old unserviceable cable from any space

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in deep in depth for laying of calbe and foundation of poles, stays and getting out in any type of soil complete all as specified and as directed.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

Returning, filling in, excavated soil including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick complete all as specified.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and as directed.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in trenchs as cable protection complete all as specified and as directed.

S&F Gl Tubing light grade 40mm dia with all fitting; laid in trenches complete all as specified and as directed.

Note:- Schedule of credit Rs. 1,89,368.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/s ABDUL QAYOOM LONE & BROS

ANUSHA ENTERPRISES

M/S GHULAM RASOOL LONE AND SONS

M/S HAJI MOHD ASHRAF SUMJI

M/S MUKHTAR CONSTRUCTION CO

M/S GHULAM NABI KHUROO AND CO

M/S NISAR AND CO

M/S S S TRADERS

M/S G M DAR AND SONS