INSERTS FOR ALL MILLS

2055347

2055352

2055356

2055361

2055362

2055363

2055378

2055384

2055386

2055387

2055388

2055391

2055433

3029497

2055571

2055747

2055749

2099647

2099648

2099649

3008010

3008011

3007859

3007905

2055745

2055746

2055366 PART NAME INSERT RCMX-25 ITEM TC INSERTS RCMX 250700 2 GRADE TK35 3 MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER TEST CERTIFICATE 4 HARDNESS OF THE ALLOY FORGED/ALLOY CAST STEEL MATERIAL TO BE TURNED 50 DEGREES SHORE ´C´/45 DEGREES SHORE ´C´ 5 CUTTING PARAMETERS SPEED 13 M/MIN FOR 50 DEGREES SHORE ´C´ & 60 M/MIN FOR 45 DEGREES SHORE ´C´ 6 FEED 0.75 MM/REV FOR 50 DEGREES SHORE ´C´ & 0.6 MM/REV FOR 45 DEGREES SHORE ´C´ 7 DEPTH 8 MM FOR 50 DEGREES SHORE ´C´ & 5 MM FOR 45 DEGREES SHORE ´C´ 8 MIN. LENGTH OF CUT PER CUTTING EDGE 800 MM FOR 50 DEGREES SHORE ´C´ & 1500 MM FOR 45 DEGREES SHORE ´C´ "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit Taegutec/Cromwell/SECO/Kennametal(WIDIA)/ISCAR"

PART NAME INSERT TYPE RCMX 250700 MATERIAL TC ITEM TC INSERTS RCMX 250700 FOR TURNING SGCI/SG ACICULAR CAST IRON GRADE HIP/ATP or EQUIVALENT MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER TEST CERTIFICATE HARDNESS OF THE SGCI MATERIAL TO BE TURNED 77 DEGREES SHORE C/50 DEGREES SHORE C CUTTING PARAMETERS: SPEED 14 M Bid Number : GEM/2025/B/6305398 Dated : 07-06-2025 Bid Document 1/42 DEGREES SHORE C CUTTING PARAMETERS: SPEED 14 M MIN FOR 77 DEGREES SHORE C & 13 M/MIN FOR 50 DEGREES SHORE C FEED 0.6 MM/REV FOR 77 DEGREES SHORE C & 0.75 MM/REV FOR 50 DEGREES SHORE C DEPTHOF CUT 3 MM FOR 77 DEGREES SHORE C & 8 MM FOR 50 DEGREES SHORE C MIN. LENGTH OF CUT PER CUTTING EDGE 600 MM FOR 77 DEGREES SHORE C & 800 MM FOR 50 DEGREES SHORE C "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec/Cromwell/SECO Kennametal(WIDIA)/ISCAR"

PART NAME INSERT 1 ITEM TC INSERTS RCMX 200600 2 GRADE HIP/ATP 3 HARDNESS OF THE SGCI MATERIAL TO BE TURNED 77 DEGREES SHORE ´C ´/50 DEGREES SHORE ´C´ 4 CUTTING PARAMETERS SPEED 14 M/MIN FOR 77 DEGREES SHORE ´C´ & 12 M/MIN FOR 50 DEGREES SHORE ´C´ 5 FEED 0.6 MM/REV FOR 77 DEGREES SHORE ´C´ & 0.5 MM/REV FOR 50 DEGREES SHORE ´C´ 6 DEPTH OF CUT 3 MM FOR 77 DEGREES SHORE ´C´ & 6 MM FOR 50 DEGREES SHORE ´C´ 7 MIN. LENGTH OF CUT PER CUTTING EDGE 600 MM FOR 77 DEGREES SHORE ´C´ & 800 MM FOR 50 DEGREES SHORE ´C´ 8 TEST CERTIFICATE REQUIRED MANUFACTURERS TEST CERTIFICATE REQUIRED "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec/Cromwell/SECO Kennametal(WIDIA)/ISCAR"

PART NAME INSERT APPLICATION CONVENTIONAL LATHE MACHINE ITEM TC INSERTS RCMX 200600 2 GRADE TK35 3 MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER TEST CERTIFICATE 4 HARDNESS OF THE ALLOY FORGED/ALLOY CAST STEEL MATERIAL TO BE TURNED 50 DEGREES SHORE ´C´/45 DEGREES SHORE ´C´ 5 CUTTING PARAMETERS SPEED 12 M/MIN FOR 50 DEGREES SHORE ´C ´ & 40 M/MIN FOR 45 DEGREES SHORE ´C´ 6 FEED 0.5 MM/REV FOR 50 DEGREES SHORE ´C´ & 0.5 MM/REV FOR 45 DEGREES SHORE ´C´ 7 DEPTH 6 MM FOR 50 DEGREES SHORE ´C´ & 3.5 MM FOR 45 DEGREES SHORE ´C´ 8 MIN. LENGTH OF CUT PER CUTTING EDGE 800 MM FOR 50 DEGREES SHORE ´C´ & 1500 MM FOR 45 DEGREES SHORE ´C´ "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec/Cromwell/SECO Kennametal(WIDIA)/ISCAR"

PART NAME INSERT APPLICATION CONVENTIONAL LATHE MACHINE 1 ITEM TC INSERTS VBMA 160408 2 GRADE HIP/ATP 3 MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER TEST CERTIFICATE 4 HARDNESS OF THE SGCI MATERIAL TO BE TURNED 70 DEGREES SHORE ´C´ 5 CUTTING PARAMETERS SPEED 14 RPM 6 FEED 0.4 MM/REVOLUTION 7 DEPTH 0.5 MM 8 MIN. LENGTH OF CUT PER CUTTING EDGE 300 MM GRADE K10 "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit Bid Details 2/42 following Makes are acceptable : Sandvik/Ceratizit Taegutec/Cromwell/SECO/Kennametal(WIDIA)/ISCAR"

PART NAME INSERT REFERENCE NO PN:R154.91 3 215 1 ITEM TC INSERTS DNMA 150608 2 GRADE HIP/ATP 3 MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER TEST CERTIFICATE 4 HARDNESS OF THE MATERIAL TO BE TURNED 73 DEGREES SHORE ´C´ FOR SGCI/52 -56 HRC FOR T160 CR12 STEEL 5 CUTTING PARAMETERS SPEED 13 RPM FOR SGCI/150 - 175 RPM FOR T160 CR12 STEEL 6 FEED 0.4MM/MIN FOR SGCI 0.32MM/REV. FOR T160 CR12 STEEL GRADE 7 DEPTH 0.5MM FOR SGCI/0.3 - 0.4MM FOR T160 CR12 STEEL 8 MIN. LENGTH OF CUT PER CUTTING EDGE 300 MM FOR SGCI 600MM FOR T160 CR12 STEEL "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec Cromwell/SECO/Kennametal(WIDIA)/ISCAR"

1. PART NAME INSERT 2. REFERENCE NO PN:RCMM0803M05 3. APPLICATION CONVENTIONAL LATHE MACHINE 4. GRADE H13A/K20 5. TEST CERTIFICATE MANUFACTURERS TEST CERTIFICATE REQUIRED "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec Cromwell/SECO/Kennametal(WIDIA)/ISCAR/KYOCERA"

PART NAME INSERT REFERENCE NO PN:RCMX12 APPLICATION CONVENTIONAL LATHE MACHINE GRADE TH03 TO SUIT ISO DESIGN ROLL MATERIAL DPCI HARDNESS TO CUT 77 SHC SPEED 12 M/MIN FEED 3 MM/MIN DEPTH OF CUT 1 MM LENGTH OF CUT 600 MM/EDGE TEST CERTIFICATE MANUFACTURERS TEST CERTIFICATE REQUIRED. "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit Taegutec/Cromwell/SECO/Kennametal(WIDIA)/ISCAR"

PART NAME INSERT REFERENCE NO MM:RCMX10 APPLICATION CONVENTIONAL LATHE MACHINE 1 GRADE OF INSERT HIP/ATP OR ITS EQVT 2 DESIGN TO SUIT ISO DESIGN 3 ROLL MATRIAL & HARDNESS TO BE CUT SGCI; UPTO 75 SHC 4 SPEED & FEED OF INSERT 15 RPM; 4 MM/MIN 5 DEPTH OF CUT 1 MM 6 LENGTH OF CUT IN MM/EDGE 740 MM EDGE 7 TEST CERTIFICATE MANUFACTURERS TEST CERTIFICATE REQUIRED "a. Supplied item should dimensionally and functionally repalce the existing item. b. Suppliers can also offer equivalent material against each item and should clearly mention that ""This specification is Equivalent to the VSP's Specification"" c. The following Makes are acceptable : Sandvik/Ceratizit/Taegutec Cromwell/SECO/Kennametal(WIDIA)/ISCAR/DRILL CO"

PART NAME INSERT REFERENCE NO PN:RCMX12 APPLICATION CONVENTIONAL LATHE MACHINE ITEM TC INSERT RCMX 120400 FOR TURNING FORGED/ALLOY CAST STEEL ROLLS 1)GRADE TK35 2)MATERIAL TO BE TURNED ALLOY FORGED/ALLOY CAST STYEEL HARDNESS OF THE MATERIAL TO BE TURNED: 50 DEGREES SHORE ´C´ CUTTING PARAMETERS CUTTING PARAMETERS: 3)SPEED 13 M/MIN 4)FEED 0.4 MM/REV 5)DEPTH 1 MM 6)MIN. LENGTH OF CUT PER CUTTING EDGE 1200 MM 7)MANUFACTURER TEST CERTIFICATE PARTY SHALL SUBMIT MANUFACTURER Bid Details 3/42