Rejuvenation of Bawari at various locations in Mandi Town Tehsil Sadar Distt Mandi HP

Amount

Cleaning of Bawri by Grinding, Washing, Rubbing and Polishing with polish of superior quality to stone with putty etc. including cost of carriage of materials complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Demolition of stone masonry above G.L. upto floor two level including stacking of servicable materials and disposal of un-servicable materials with in 20 metres lead dressed stone in Cement Mortor in all leads and lifts.

Stone soling properly hand packed in all leads and lifts and as per entire satisfaction of Engineer-in-Charge.

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 crushed stone aggreagte 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 crushed stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads & lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like in all leads & lifts. Vertical surfaces such as walls (any thickness) partition and the like including attached pillaster,buttresses plinth and string courses and the like in all leads and lifts.

Foundation, footing basis of columns etc. and mass concrete in all lead and lifts

Columns, pillars, post and struts :- Square, rectangular or polygonal in plan in all leads and lifts.

Beam, cantilever, girders and lintels :- Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. in depth in all heights from floor in all leads and lifts.

Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc.upto 200mm in thickness in all leads and lifts.

Edge of slab and breaks in floors and walls under 20 cm wide in all leads and lifts.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortor 1:4 (1 cement : 4 sand) in all leads and lifts.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- foundation, footings bases of columns etc. and mss concrete in all leads and lifts.

Columns, pillars, post and struts up to floor two level in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in:-Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 crushed stone aggregate 40mm nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ breast walls, the size of plums shall usually be 150 mm. to 300 mm. as per H.P.P.W.D specifications in all leads and lifts.

Brick work using common burnt clay building bricks in Superstructure in cement mortar 1:6 (1cement : 6 sand) (Ist class brick) in all leads and lifts.

Providing and laying Duro stone vetrified tiles (300x300x10 mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and Laying clay tiles over mumty roots grouted with cement mortar 1:3 (1cement:3 sand over a 12 mm layer of cement motor 1:3) and finished neat in all leads and lifts.

6 mm cement plaster to ceiling in CM 1:3 ( 1 Cement :3 Sand) in all leads and lifts.

20 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) in all leads and lifts.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface in all leads and lifts.

Providing and laying cobble stone 100 mm x 100 mm x 100 mm as per entire satisfaction of Engineer-in-Charge.

Providing Fixing stone lion mouth shape complete in all leads and lifts and as per entire satisfaction of Engineer-in-Charge.

Providing and laying Tor Steel reinforcement for reinforcement cement concrete work including bending, binding and placing in position including the cost of binding wire and cutting in all leads and lifts as per the directions of the Enginerer-in-charge.

Steel work welded in built up sections,trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint :- In grating, framed guard bar, ladders, railing brackets and similar works in all leads and lifts.

Painting two coats(excluding priming coat)on previously painted and steel and other metal surface with readymixed paint brushing, finishing oil, glass to give an even shade including cleaning the surface of dirt, dust and other foreign matters with ready mixed paint other than white in all leads and lifts.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or Hips 60 cm over all with 0.60 mm thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNT) ornanic coating of 20 micrones over 5 micrones primer coating to back coat of polyester of 5 microns primer coating i/c fixing with prepainted iron J or L or hooks, bolts and nuts 6 mm dia metre with preprinted limpet and Vitumen washers complete with all accessories as required as per the direction of the Engineer-in-charge in all leads and lifts.

Deatering through diesel pump af 5.00 HP including the cost of crew members and other accessories etc. complete in all respects.

Writing letters or figures on any surface with black Japan paint up to 15 cm height (stops, comas, hyphens and the like not to be measured and paid separately) block letters / figures in all leads and lifts

SANJAY KUMAR