REPAIR/MAINTENANACE TO VARIOUS OTM BUILDINGS INCLUDING PERIODICAL SERVICES AND REPAIR/REPLACEMENT OF INTERNAL WIRING AND VARIOUS COOLING APPLIANCES AT ICGS KAKINADA UNDER GE(I)(CG) VIZAG

Amount

Demolition of Brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item No 2 but except bricks.

Taking down Cement Plaster of any description on internal surfaces on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered of walls applying two coats of Acrylic washable distemper over a coat of alkali resistant primer over 2mm thick wall putty complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M&L Preparing old painted surfaces by washing, rubbing down and stopping of plastic emulsion surfaces and applying one or two coats of plastic emulsion of any colour pattern over a coat of primer on surfaces of walls complete all as specified and directed.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and as directed.

M&L for Preparation of old decorated wall surfaces (plastered or un plastered) including cornices etc. by washing, rubbing down and stopping and applying a coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated ceiling surfaces by washing, rubbing down and stopping and applying a coat of white wash complete all as specified and as directed.

M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered surfaces and applying a coat of Acrylic wshable distemper on surfaces of walls over a coat of wall putty complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M&L for preparation of old painted surfaces by washing, rubbing down and stopping of distempered surfaces and applying a coat of oil bound distemper on surfaces of Ceilings over a coat of wall putty complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint to old wooden surface including preparation of surface of any description over 10 cm width or girth. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M&L preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

M&L for dismantling floor, hearth or wall tiling / Terrazzo including cement mortar bedding (but not backing ), and removal serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl. 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge. Make : Spartek/Johnson / Kajaria / Orient / Cera / Somany

S&F Coloured Non Skid Ceramic tiles (1st quality) 7 to 8 mm thick, area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or colured cement to match over the tiles and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed . Make : Spartek/Johnson / Kajaria / Orient / Cera / Somany

S&F Coloured glazed ceramic tiles (1st quality) of size 300mm x 200mm x 7 mm thick on vertical surfaces such as skirting, dado etc. set& jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, over and including backing coat of 10mm thick in cement mortar 1:4 on wall of brick work or concrete surfaces to receive tiles complete all as specified and as directed. Make : Spartek/Johnson / Kajaria / Orient / Cera / Somany

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed

M&L 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub-base.

M&L 60 mm thick PCC M-35 machine pressed precast concrete glazed coloured interlocking pavor block any shape and size confirming to IS-15658-2006 using with grey cement and pigment over 75mm thick sand filling under floors or in foundation including watering and consolidation.

M&L chequered designed cement concrete tiles of size 300mm x 300 mm x 20mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for 20mm thick granite (of any type) tiles machine cut in skirting, dado laid over 10mm thick rendering cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing all as specified and directed.

S&F in repairs fancy type Bib taps of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs fancy Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. .

S&F in repairs 15mm dia stop valves copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. Make: Zoloto / Tiger / Lustre

Refixing old steel tubing of 15 mm bore and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. Make: Surya Roshni Ltd / Tata / Jindal steel / Prakash

Cleaning and removing all scale and dirt, etc., from tanks of capacity exc 500 Ltrs but not exc 1000 ltrs, cleaning with bleaching powder slurry and allowed to dry and tank washing and cleaning the tank with fresh water including refixing the top cover of tank properly after cleaning and writing letters such as details of the tanks like date of cleaning, capacity of tank with synthetic enamel paint with letter size 10 cm height in black colour, over a thick of size 60 x 30mm complete all as directed by Engineer-in-Charge.

S&F in repairs 20 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Prayag Polymer Pvt. Ltd. / Polytuff

S&F in repairs 25 mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. Make : Prayag Polymer Pvt. Ltd. / Polytuff

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories).

S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make : Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make: Jain Irrigation / Kisan / Supreme / Prince / Anant / Oriplast

S&F in repairs 75mm bore PVC (SWR) bends of any radius with access door complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and as directed.

S&F in repairs SS towel rail 600mm long fixed with & incl. chromium plated brass screws and wooden/plastic cleats ( minimum wt. 190 gms).

S&F in repairs PVC valve less, syphonic action type, flushing cistern of 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Make : SLIMLINE / CERA / Hindware

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. MAKE: Jaguar or equivalent

M&L 32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs, Stainless steel Grating 100/125mm with/without hole for waste pipe complete all as specified and as directed.

S&F in repair curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc.

Taking down carefully copper/aluminum existing point wiring (light/fan/socket or power points) complete incl wooden battens/casing capping or conduit etc (without disturbing existing fittings point wiring etc) and all connected fittings such as switch, socket, ceiling rose, lamp holder, brackets ceiling fittings, bulk head fittings and fan regulator etc and making good to disturbed surfaces of wall floor etc all as directed.

Dismantling of old U/S main switches DBs, MCB enclosures, electric meter, PVC rectangular blocks etc and keeping in safe custody either for reuse or for disposal Including making good to the disturbed surface of wall all as directed.

M & L for Modular concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade (ISI marked) not less than 19 mm dia/ Casing caping of 19-20 mm with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc. including anodized standard sunken boxes as per standards as per manufacturer norms for concealed mounting with earth dolly and standard grid, crown and cover plate for fixing of switches / sockets, fan regulators, with captive screws including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing, including cutting the chasses for fixing of wiring conduit as per conduit size not more the 25 mm deep and 30 mm in width and making good the disturbed surfaces by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of paris/ Putty or distemper / colour wash with same existing colour surfaces all as specified and as directed by Engineer-in-Charge for one light/fan/call bell Note: The cutting chiseling and making good item will be excercised when wiring to be concealed.

All as per item No 49 here-in-before but 5/6 Amps socket Point Same board)

All as per item No 49 here-in-before but 5/6 Amps socket Point (Independent)

All as per item No 49 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and as directed.

S&F switch piano, 6/5 Amp single pole, flush type one way 230 volts complete all as specified.

S&F Bell push, flush type, 6/5 amp, 230 volts complete all as specified

S&F socket outlet 2 in 1, 5 pin, 6/5 Amps flush type complete all as specified.

S&F Switch Socket combination outlet 2 in 1, 6/5 Amps flush type complete all as specified..

S&F Switch Socket combination outlet 2 in 1, 3 pin, 6/5 and 16/15 Amps flush type universal complete all as specified.

S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified.

S&F gang box polycarbonated suitable for and including mounting one Switch 15 Amps and one socket 5 pin 15 Amps and with screws complete.

S&F gang box polycarbonated suitable for and including mountings one switch 5 Amps and one socket 5 pin 5 Amps and with screws complete.

S&F Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed by Engr-in-Charge

S&F Modular switch 16 Amp, 1 way, 1 module size complete all as specifiedand directed by Engr-in-Charge

S&F modular Bell Push switch 6 A 1 way, 1 module size complete all as specified and directed by Engr-in-Charge

S&F Modular socket 6 Amp, 2/3 pin, 2 module size complete all as specified and directed by Engr-in-Charge

S&F Modular socket 6A/16 Amp 2/3 pin combined 2 module size complete all as specified and directed by Engr-in-Charge

S&F in replacement of Modular fan step regulator 120 W 2 module size complete all as specified and directed by Engr-in-Charge

S&F ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and as directed by Engr-in-Charge

S&F electronic call bell, Dingdong type, 6 Amp, 230 Volt, single pole complete all as specified and as directed by Engr-in-Charge

S & F in repairs modular AC Box(white), plug and 3 pin socket two in one, all in one type,single pole and neutral box with one single pole MCB 20 A mp 230 Volts complete all as specified at site. Make-Havells cat no. DHDMCSN0251016 or equivalent.

S&F heating element trigular/ Circular shape for geyser of capacity 2 KW complete all as specified..

S&F Thermostate for geyser complete all as specified.

S&F Capacitor 1.5/2.5/3 mfd single pahse 230V for ceiling/wall/ exhaust fan complete all as specified.

Taking down carefully ceiling fan BLDC type 1200/1400mm Sweep from existing location carrying out rewinding, replacement bearing, painting, cleaning, replacement of BLDC driver/ PCB and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in- Charge

Taking down carefully ceiling fan of Squirrel cage induction motor type 1200/1400mm Sweep from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan of induction motor, metal body type of Size 250mm from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan of induction motor, metal body type of Size 300mm from existing location carrying out rewinding, replacement bearing, painting, cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in-Charge

Taking down carefully Exhaust fan PVC body type of Size 250mm from existing location carrying out rewinding of motor incl replacement of fan, louvers shutter, motor shaft and frame cleaning and servicing and refixing in existing/new location incl make electric connection with PVC insulated copper conductor cable from fan to ceiling rose complete all as specified and directed by Engr-in- Charge

S&F MCB DB TPN 4 ways double door, including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB DB SPN 8 ways double door, powder coated including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB DB SPN 4 ways double door, powder coated including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by Engr-in-Charge

S&F MCB 40-63 Amps, TPN, 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F MCB 40 to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed

S&F MCB 6 to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F sub-main wiring concealed on wall or ceiling with PVC insulated & unsheathed two run of 6.00 Sqmm single core multi stranded copper conductor cable (FRLSH). 1100 Volt grade alongwith one run of 6.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including non metallic rigid PVC conduit of adequate size with all accessories including taking down existing burnt sub main wiring complete all as specified and as directed. Notes: (i) Three runs of 6.00 Sqmm cable and one run of Conduit shall be measured as one unit for payment purpose. (ii) Cutting chases shall deemed to be included in quoted rate.

All as per Srl Item No. 86 here-in-before but sub-main wiring concealed on wall or ceiling with PVC insulated & unsheathed two run of 4.00 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH).

S&F in repair Plug top 3 x 15A universal made in PVC body Complete all as specified and as directed.

S&F in repair Plug top 3 x 5A universal made in PVC body Complete all as specified and as directed

S&F lamp holder, PVC / Polycarbonate type with PVC round / square back block/plate suitable for batten fittings including taking down old unserviceable one complete all as specified and as directed.

S&F 7-10 watt LED lamp suitable for lamp holder and decorative bracket wall light fittings complete all as specified and as directed.

S&F 12-15 watt LED lamp suitable for lamp holder and decorative bracket wall light fittings complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light/ batten type connecting up with three core flexible copper conductor cable of suitable size from celling rose complete all as specified and as directed.

S&F LED Mirror lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light/ batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F round shape 10/12 watt 6" Size 220 volts AC recessed/Surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof/ ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Servicing of Air conditioner Split type, window type and cassette type of capcities 1.5 to 2.0 TR complete with dismantling internal and external units into components, cleaning of components fan motor, blower, housing, filters etc. checking up and rectification to wiring and connections, cleaning and re-insulation of refrigerant lines, replacement of necessary parts and accessories, re-allignment of the fan coil unit and replacement of drain/condensate pipe, connecting up and testing, to make the unit in fully working condition complete all as specified. Note : The replaced spares shall be measured and paid under relevant item as supply only from Srl item No. 98 to. 121 here-in-after.

Dismantling the indoor and out door units of the air conditioner split type completely, transporting to workshop for carrying out repairs, leakage, transporting back to the site, re-installing the same on the new/existing location including copper tube, fixing for clamp complete all for satisfactory functioning of the equipment complete all as directed by Engineer -in-Charge at site. (Note: Required material for repairing, transporataion etc. shall be included in the quoted rates)

Supply only capacitor for AC 45 Mfd/36 Mfd

Supply only capacitor for condensing fan motor 30/25 Mfd

Supply only starting relay

Supply only evaporator blower for AC

Supply only printed circuit board for split AC as per sample

Supply only filter drier

Supply only condenser fan motor for split AC 1.5 TR

Supply only condenser Fan Motor for split AC 2 .0 TR

Supply only compressor sealed unit for AC of capacity 2.0 TR

Supply only compressor sealed unit for AC of capacity 1.5 TR

Supply only condensor unit for air conditioner

Supply only blower motor for split type AC as per sample

Supply only condenser fan motor for AC As per Sample

Supply only swing motor for split AC

Supply only outdoor unit fan blade for split AC as per sample

Supply only cooling coil as per sample for LG/Voltas/Carrier

Supply only over load protection coil

Supply only brass valve for 1.5/2.00 ton AC

Supply only outdoor stand for 1.5/2.00 ton split AC

Supply only copper pipe of size 1/2 with insulation foram for 1.5/2.00 ton AC

Supply only copper pipe of size 1/4 with insulation foram for 1.5/2.00 ton AC

Supply only PVC insulated copper FRLSH grade cable three core and 2.5 sqmm wire

Supply only contactor ,240 volts for 1.5/2.00 ton split AC Note for item Nos. 98 to 120 here-in-before : The makesof the spare parts shall be as per existing make at site or as directed and recommened by Engineer-in-Charge and approved by GE (I).

M&L for recharging of refrigerants gas in split type ACs/Water Coolers / refrigerator/Deep Freezers all as specified and as directed.

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3226625)

DANDU CONSTRUCTIONS (BID ID -3228042)