Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 LAdmitted-Finance | ₹2.4 L | L1 | Admitted-Finance |
| 2 | L2₹2.7 LAdmitted-Finance | ₹2.7 L | L2 | Admitted-Finance |
| 3 | L3₹2.7 LAdmitted-Finance | ₹2.7 L | L3 | Admitted-Finance |
| 4 | L4₹3.5 LAdmitted-Finance R O VILL P O NAIN TEHSIL BARSAR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | ₹3.5 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SANJEEV SINGH L3 | Nikhil sharma govt.contractor L1 | MAYANK JASWAL GOVT CONTRACTOR L2 | PARVEEN KUMAR L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches earth work in pick work, jumper work eithin all leads and lifts stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returening the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidationg each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed within all leads and lifts as per direction of Engineer-in-charge | 267.3 | P/cum | 225 ₹60,142.50 | 200 ₹53,460 | 240 ₹64,152 | 290 ₹77,517 |
| 2.00Repair of GI pipe with electric welding with superior quality rod of GI pipes at various points to stop the leakage including cutting of pipe if required and making alignment as per site requirement of following dia within all leads and lifts as per direction of Engineer-in-charge | |||||||
| 2.01 | 25mm dia | 45 | P/Joint | 100 ₹4,500 | 250 ₹11,250 | 200 ₹9,000 | 130 ₹5,850 |
| 2.02 | 32mm dia | 45 | P/Joint | 200 ₹9,000 | 260 ₹11,700 | 270 ₹12,150 | 180 ₹8,100 |
| 2.03 | 40mm dia | 40 | P/Joint | 300 ₹12,000 | 290 ₹11,600 | 350 ₹14,000 | 220 ₹8,800 |
| 2.04 | 50mm dia | 40 | P/Joint | 400 ₹16,000 | 340 ₹13,600 | 380 ₹15,200 | 275 ₹11,000 |
| 2.05 | 65mm dia | 50 | P/Joint | 500 ₹25,000 | 380 ₹19,000 | 420 ₹21,000 | 350 ₹17,500 |
| 2.06 | 80mm dia | 40 | P/Joint | 600 ₹24,000 | 420 ₹16,800 | 480 ₹19,200 | 450 ₹18,000 |
| 2.07 | 100mm dia | 40 | P/Joint | 700 ₹28,000 | 450 ₹18,000 | 520 ₹20,800 | 600 ₹24,000 |
| 3.00Cutting and welding of gravity main pipe line of various dia including carriage of welding set at site of work complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge | |||||||
Tender Value
₹3.4 L
EMD Value
₹6,800
Closing Date
9 Mar 2026, 11:00 amClosed
EXECUTIVE ENGINEER
JSV Divn Indora
Repair of damaged GI pipe including welding and replacement of existing distribution lines along the road due to widing of roads under section Gangath
2026_HPIPH_129995_1
EE-JSV-IND-NIT-6501-25 dated 28-02-2026
Open Tender
Civil Works
Indora
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
₹6,800
17 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
Excavation in foundation trenches earth work in pick work, jumper work eithin all leads and lifts stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returening the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidationg each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed within all leads and lifts as per direction of Engineer-in-charge
Repair of GI pipe with electric welding with superior quality rod of GI pipes at various points to stop the leakage including cutting of pipe if required and making alignment as per site requirement of following dia within all leads and lifts as per direction of Engineer-in-charge
25mm dia
32mm dia
40mm dia
50mm dia
65mm dia
80mm dia
100mm dia
Cutting and welding of gravity main pipe line of various dia including carriage of welding set at site of work complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge
50mm dia
65mm dia
80mm dia
100mm dia
Providing, Welding & fixing of MS flanges Table-5 to confirming to IS 6392-1971 (Latest with upto date amendments) of flange table with MS tubes in one layer on outer face & one layer on inner face to make the joint leak proff. The thickness of gasket not less then 3.00mm confirming to IS 2712-1965 complete in all respect and to the best satisfaction and direction of Engineer-in-Charge with in all leads & lifts. Flange to be welded after 6 mtr interval of pipe
50mm dia
65mm dia
80mm dia
100mm dia
Manufacturing and fixing of MS bend including cost of cutting & welding of pipe of required degree at site complete in all leads and lifts
40mm dia
50mm dia
65mm dia
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
forms.pdf
Tender Documents • 1.64 MB
terms.pdf
Additional Documents • 0.12 MB
BOQ_192177.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid