Annual Repairs and Maintenance to ESIC Regional Office at Thrissur

Amount

Engaging skilled Plumber cum Supervisor with necessary tools and miscellaneous minor fittings such as Tufflon tape, washers, solvents (PVC/CPVC) jumper valves etc. for attending the day to day complaints , minor repair works, fixing /Replacing the damaged fittings such as taps/ wash basins, EWC/IWC, flushing cisterns, Replacing damaged PVC/GI pipe lines, PVC rain water pipes and fittings, pumping water to the Regional Office, ESI Dispensary and staff quarters including minor repairing and maintenance of Pumps and periodic chlorination of open wells etc. all works connected with internal/external water supply lines, water supply fittings/ fixtures, sanitary installations, OHT etc. of ESI Regional Office, ESI Dispensary and Staff Quarters at Thrissur- all in Thrissur Dist. and Supervision of work done by other workers as a team leader including liaison with Hospital/dispensaries authorities and ESIC Engineers etc. as directed by the Engineer in charge.

Plumber in one shift of 8 hours duty From 9.00 AM to 05.00 PM on all days excluding Sundays or any one off day per week.

Engaging Helper for plumber for attending complaints on sewer/drainage lines, removing blockage in Drainage/ sewer lines, Gully traps, Manholes and Septic tanks etc. in the campus of ESI Regional Office, ESI Dispensary and Staff Quarters at Thrissur- all in Thrissur Dist. etc. complete as directed by the Engineer in charge.

Helper for plumber in one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week.

Engaging Helper (Male Mazdoor) for assisting plumber in attending the day to day complaints of all sorts of Internal water supply/External water supply/sanitary installations /assisting carpenter in repair works/ cleaning open area in campus/ assisting sewer man in clearing blockages/ clearing silting storm water drains including removing and replacing RCC covers, removing growth of banyan tree on walls and Terraces, cutting branches of trees up to 20 cm in diameter etc. in ESI Regional Office, ESI Dispensary and Staff Quarters at Thrissur- all in Thrissur Dist. (Mazdoor is not to be specifically attached with any skilled worker and suppose to attend all woks assigned to him and as directed by the Engineer in charge.

Helper for plumber (male mazdoor) in one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week.

Engaging Skilled Carpenter/ Aluminium Fabricator with necessary tools and miscellaneous fittings such as screws and sleeves etc. in attending complaints regarding all steel/wooden/Aluminium doors, windows /partitions in the ESI Regional Office, ESI Dispensary and Staff Quarters at Thrissur- all in Thrissur Dist. as directed by the Engineer in charge

In one shift from 9 AM to 5 PM on daily basis as and when required by the Engineer in charge.

Engaging mate for attending horticulture works and landscape works, gardening, cutting, pruning, trimming, watering, manureing, required earth works for pits/ trenches, arranging pots with plants, saplings, seeds, etc. complete as directed by the Engineer in charge in the entire campus of ESIC Staff Quarters and Dispensary at Kuttanellur and Regional Office at Thrissur.

In one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week.

In one shift of 8 hours duty from 9 AM to 5 PM on all days excluding Sundays or any one off day per week.

Cleaning of blocked sewer line and manholes with electric running pump set by pumping out sewage from manhole to septic tank including sundries and labour charges etc all as per directions of engineers-in-charge.

Supplying miscellaneous fittings for plumber of approved quality including cartage to site excluding the labour charges which are paid under item no 1 to 5.

Brass bib cock 15 mm (400 gm )

Brass stop cock 15 mm (400 gm )

CI cover 300*300 mm without frame (4.50Kg)

CI cover 615*450 mm without frame ( 23 Kg)

C.I. grating 150 mm dia, weighing not less than 440 gm

PTMT grating 100 mm dia

SCI gully/Nahni grating 100 mm

White vitreous EWC Pan of approved make

White vitreous china Wash Basin 630*450 mm or nearest size

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

Brass full way valve with C.I. wheel (screwed end) 80 mm dia

Gun Metal Non return Valve 40 mm

Gun Metal Non return Valve 50 mm

CP brass waste coupling 32 mm

CP brass waste coupling 40 mm

CP brass Bib cock 15 mm ( 400 gm)

CP brass long body Bib cock 15 mm ( 690 gm)

CP Brass Angle valve 15 mm ( 400 gm)

PVC automatic flushing cistern 10 liters capacity

CP Brass with elbow operation lever bib cock 15 mm

PTMT Bib cock 15 mm

CPVC pipe 15 mm dia including all fittings

CPVC pipe 20 mm dia including all fittings

CPVC pipe 25 mm dia including all fittings

CPVC pipe 40 mm dia including all fittings

CPVC pipe 50 mm dia including all fittings

Plastic seat with lid / brass hinges for EWC

Polyethylene water storage Sintex/Aqua ISI marked tank with cover and suitable locking arrangement with inlet and outlet regulatory valves.

CP brass pillar tap for wash basins weighing not less than 690 gm

Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore

Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore

Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia

Mirror of superior make glass 60x45 cm

Rach bolt

CP brass health faucet 15mm

Siphoning set with rubber washer

50mm dia PVC pipes @ 6 kg/cm2 including all fittings

50 mm dia PVC pipes @10kg/cm2 including all fittings

75 mm dia PVC pipes @6kg/cm2 including all fittings

110 mm dia PVC pipes @6kg/cm2 including all fittings

25 x 20 GI bush

Spindle consealed

15mm PVC taps

CP Angle valve

CP X Nipple 15 mm

CP TEE 15mm

PVC Pillar cock

15 mm long body pvc tap

PVC multi floor trap

Silicone Sealant

Supplying miscellaneous fittings for Carpenter of approved quality including cartage to site excluding the labour charges which are paid under item no 1 to 5.

Oxidized Mild steel butt hinges 125*65*2.12 mm

Oxidized Mild steel butt hinges 75*47*1.70 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm ( ISI )

Anodised Aluminium handles 100 mm with plate 150 x 32 mm (ISI)

Anodised Aluminium handles 75mm with plate 125 x 32 mm (ISI)

Anodised Aluminium Tower Bolts (ISI) 250*10 mm

Anodised Aluminium Tower Bolts (ISI) 200*10 mm

Anodised Aluminium Tower Bolts (ISI) 150*10 mm

Anodised Aluminium Tower Bolts (ISI) 100*10 mm

Float glass panes 4 mm thick (10 kg/sqm) cut to size including wastage

Anjili/Jakwood in scantlings ( excluding wastage to be measured)

Aluminium hanging floor door stopper with twin rubber & stopper

Hydraulic door closer Tubular type Aluminium section body

100 mm mortice lock with 6 levers for aluminium door

Aluminium Grill as per IS 1868 ( excluding wastage to be measured)

Prelaminated Particle Board both side decorative lamination Exterior grade 12 mm ( excluding wastage to be measured)

Dash fastener/Chemical fastener for aluminium work

Powder Coated Aluminium sections ( used at site excluding wastage)

Brass hard drawn hooks and eyes 150 mm

Brass hard drawn hooks and eyes 100 mm

G.I fasteners 100 x 8 mm

Brass cup board locks 6 levers 65 mm

Credit for dismantled materials (payment to be made to ESIC in lieu of dismantled materials available while replacing with new fittings).

Brass bib cock 15 mm

brass stop cock 15 mm

CP brass angle valve 15 mm

Gun metal valves- 20 mm nominal bore

Gun metal valves- 25 mm nominal bore

Gun metal valves-32 mm nominal bore.

Gun metal valves-40 mm nominal bore

Gun metal valves-50 mm nominal bore

15 mm nominal outer dia GI pipe

20 mm nominal outer dia GI pipe

25 mm nominal outer dia GI pipe

32 mm nominal outer dia GI pipe

40 mm nominal outer dia GI pipe

CP Brass pillar taps 15 mm

CI cover 300*300 mm without frame (4.50 Kg)

CI cover 610*450 mm without frame ( 23 Kg)

CI gratings 150*150 mm

SCI gully/Nahni grating 100 mm

Brass full way valve with C.I. wheel (screwed end) 25 mm dia

Brass full way valve with C.I. wheel (screwed end) 40 mm dia

Brass full way valve with C.I. wheel (screwed end) 75 mm dia

Gun Metal Non return Valve 40 mm

Gun Metal Non return Valve 50 mm

CP brass Bib cock 15 mm ( 400 gm)

CP brass long body Bib cock 15 mm ( 690 gm)

CP Brass Angle valve 15 mm ( 400 gm)

CP Brass with elbow operation lever bib cock 15 mm

CP brass pillar tap for wash basins weighing not less than 690 gm

Hydraulic door closer Tubular type Aluminium section body

100 mm mortice lock with 6 levers for aluminium door

Aluminium Grill as per IS 1868 ( excluding wastage to be measured)