REPAIR MAINT TO BR NATURE WORK FOR JOINERY FLOORING SUNKEN PORTIONS ROLLING SHUTTERS PLASTERING AND REPLACEMENT OF WATER SUPPLY FITTINGS AND FIXTURE CEILINGS ALUMINIUM WORK ETC AT ZONE A DIPR DIPAS SSPL CFEES KWC LAB AND REPAIR REPLACEMENT OF SEW

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar 1:4 with Sub class ‘B’ brick including manhole raising, footpath, etc complete all as specified and directed.

All as per item No. 02.00 here-in-before but except bricks

Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

M&L for 15mm thick rendering plaster in cement mortar 1:6 on fair faces of brick work or concrete work finished even & fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering plaster in cement mortar 1:4 on other than fair faces of brick work or concrete work, finished even & fair without using extra cement all complete all as specified and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building.

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling surface finished even & fair without using extra cement complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings all as specified including using white cement in place of grey cement for grit wash complete all as specified and directed. Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed. Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered or previously untreated wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified and directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper(white or tinted) over a coat of alkali resistant primer complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc 4 sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc made out of 1.25 mm thick MS sheet complete all as specified and directed.

S&F pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate including necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling hollow portion of pressed steel frame complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides all as spd and directed.

M&L for prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as specified and directed.

S&F 100mm size butt hinges, medium weight cold rolled mild steel all as spd and directed

S&F 150 mm long aluminiuminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminiuminum handles cast type, anodized complete all as specified and directed.

S&F 250mm long aluminiuminum alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminiuminum alloy complete all as specified and directed.

S&F aluminiuminium section powder coated (powder coating not less than 50 micron thick) grill of suitable size 2 to 3 mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed. and directed

S&F anodised aluminiuminium powder coating aluminiuminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron)frame for doors, windows, ventillators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminiuminium Powder coating door shutters aluminiuminium section weighing not less than 0.55Kg/m (minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminiuminium snap beading screws,all necessary builders hardware etc complete all as specified and directed.

S&F anodised aluminiuminium Powder coating window and ventillator shutters, side hung type without sash bars aluminiuminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminiuminium snap beading screws ,anodised aluminiuminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare complete all as specified and directed.

S&F 12mm thick particle board prelaminated both sides of approved shades fixed to aluminiuminium shutters/ partitions complete all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle fixed with glazing pins and rubber beading etc in aluminiuminium door/window/partitions etc complete all as specified and directed.

M&L for in repair Glass film colored/ plain 25 micron sticked to glass panes as per approved pattern/design, includling LOGO/design in film all as per instructions of manufacturers complete all as specified and directed.

S&F in repair aluminiuminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized aluminium section 63.50x 38.10 x 1.50mm including necessary jointing cleats glazing clips, rubber packing anodised aluminium snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and directed. Note :- (i) Sheet glass and particle board shall be measured and paid for separately) (ii) area of Each panel shall not exceed 1.00 sqm

S&F in repair door closer hydraulically regulated, aluminiuminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminiuminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed.

S&F in repair MS Mortice lock assembly 100mm size verticle type with one pair of lock Handles for fixing on both sides of wooden flush door, including 4 lever lock of required size complete all as specified and directed.

S&F in repair MS Dead lock 4 lever assembly 100mm size verticle type fixed in aluminiuminium doors complete all as specified and directed.

S&F in repair MS Dead lock 2 lever assembly 50mm size verticle type fixed in aluminiuminium doors complete all as specified and directed.

S&F in repair 250 mm long aluminiuminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed.

M&L for securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed.

S&F in repair extruded aluminiuminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F in repair 200 mm long aluminiuminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm MS Butt hinges medium weight cold rolled complete all as specified and directed.

S&F in repair 75 mm MS Butt hinges medium weight cold rolled complete all as specified and directed.

S&F in repair 100 mm long aluminiuminium handles, cast type anodised for alluminium windows complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair 3 mm thick sheet glass in squares/rectangle in Each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

S&F in repair 4.8 mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc. for aluminiuminium door & window exc 0.5 Sqm in Each pane complete all as specified and directed.

Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed.

S&F Pre-painted galvaluminiume aluminiuminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvaluminiume aluminiuminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, rain water gutters,over center ridges etc fixed with self tapping screws complete all as specified and directed.

Repairing to rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel, greasing the sides of the rolling shutter, including taking out and re-fixing rolling shutter for fair functioning size of rolling shutter n.exc 25 sqm Each complete all as specified and directed.

S&F in repair mild steel plain sheets covering to door shutter and top cover of rolling shutter cover cut to size, edges beaded as directed, holes punched complete all as specified and directed.

Taking down and Adjusting / repairing of aluminiuminium door/windows shutters, for easy closing/opening tightning of hinges or changing the position of hinges, tightening of Glass/ Particle board by replacing rubber beading and clip packing, adjustments of floor machine for fair opening and closing and refixing the same complete all as specified and directed.

Taking down and Adjusting / repairing of steel window shutters for fair opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position to make fully functional complete all as specified and directed.

Taking down and refixing of wooden/PVC door shutter (after taking down) loosened at joints of styles, by let in for making good and where hinges etc have been removed/loosened from chowkhets or frames and easing etc for complete functional complete all as specified and directed.

Supply and fixing as in repair 15mm bore GI tubes "medium grade" galvanized with and including new fittings fixed to walls and ceiling or laid in floors complete all as specified and directed. & directed.

Supply and fixing as in repair 20mm bore GI tubes "medium grade" galvanized with and including new fittings fixed to walls and ceiling or laid in floors complete all as spd & directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed,screwed down, high pressure screwed ends for iron pipe or for unions and fixed complete all as specified and directed. and as directed.

Dismantling water tanks and removing from site of 500 litres capacity complete all as specified and directed.

Dismantling water tanks and removing from site of 1000 litres capacity complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position as specified in SSR Part I complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position as specified in SSR Part I complete all as specified and directed.

S&F in repair PVC lid / cover for PVC water tank 500 / 1000 litre capacity including removing old broken lids complete all as specified and directed. and as directed.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old unserviceable pipes complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old pipes complete all as specified and directed.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

S&F CPVC Brass FTA female adaptor fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete complete all as specified and directed.

S&F in repair vitreous china pedestal pattern, "EWC" white with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc. complete all as specified and directed.

S&F in repair vitreous China urinals, bowl type(back or corner wall type) ofsize 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe complete all as specified and directed.

S&F in repair complete Urinal sensor kit infrared type based on inbuilt motion sensor includg battery/Li ion AA duracel cells suitable for sensor type urinal pot of required size complete fitting for proper functioning all as specified and directed.

S&F in repair vitreous china Urinal, Half stall type white including connections to flushing pipe and outgoing pipes fixed in repairs complete all as specified and directed.

S&F in repair urinal spreader CP coated for fixing with 15 mm dia PVC connection pipe complete all as specified and directed.

Supply and fixing as in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick including cutting for and pining in ends of brackets complete all as specified and directed.

S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminiuminised hinging device complete all as specified and directed.

S&F in repair PVC internal syphone kit with handle suitable for low level flushing cistern having10 ltrs capacity, white, valveless, syphonic action type complete all as specified and directed.

S&F in repair flush pipe/L bend for PVC low level flushing cistern as suitable for EWC/ Orissa pattern pan including jointing to WC complete all as specified and directed.

S&F in repair soap dish mild steel chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified and directed.

Supply and fixing 15mm dia PVC connection with brass nut, of length 600 mm,fixed as in repair complete all as specified and directed.

S&F in repair 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply and fixing angle stop valve, cast copper alloy chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

S&F in repair 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing surface complete all as specified and directed.

S&F in repair 100 mm dia mild steel chromium plated grating with/without waste hole complete all as specified and directed.

S&F in repair mild steel chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed.

S&F in repair 32mm dia mild steel CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.

S & F as in repair 40mm dia mild steel CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed.

S&F in repair 32/40mm dia PVC flexible waste pipe for WHB/urinal/sink etc 60cm long with union complete all as specified and directed.

S&F in repair mild steel CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed.

S&F in repair mild steel Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel ring having dia of ring not less than 150mm fixed to walls with necessary screwscomplete all as specified and directed.

S&F in repair CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe complete all as specified and directed.

Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to 500 ltrs capacity of tanks complete all as specified and directed.

All as per Srl Item No 105.00 above but exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall including clamps or laid in traenches complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps or laid in traenches as required, fixed as in repair complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed.

Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Precast RCC work (Nominal Mix) (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, man hole cover ,drain covers with perforated hole, Shelves etc and like complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bend to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified and directed.

S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed.

Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land from 5KM upto 20KM lead at approved municipal dumping ground complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 15 mm bore pipe, complete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fixing factory made chequred cement concrete prepolished coloured tiles 300mm x 300mm x 22 to 25 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & Labour for 75mm thick PCC 1:4:8 type D-2,(using 40mm graded stone aggregate) as in sub base of floor concrete all as specified & directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortaror laid dry complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-22mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut Granite slab 15 to 18 mm thick for steps, flooring,pillars,skirting/dado, window cills, cooking plateforms and like and including 10mm thick (avg thickness) cement mortar 1:4 screeding and 3mm thick setting coat in cement morter 1:2, set and jointed with white/coloured cement to match the shade of slab including necessary nosing/chamfering of edges, cutting, waste, rubbing and polshing etc complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified and directed.

M & L for machine made Rubber moulded precast concrete interlocking paver block (coloured),pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 25mm average thickness sand cushioning complete all as spfd and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc complete all as specified and directed.

S & F Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work ,(PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks,hinges,necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as specified and directed.

S&F Mild Steel work in tubular trusses with round/square tubular pipes as in rafters, purlins, columns etc for Shed work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed.

M&L for non skid coloured ceramic tiles 400mm X 400mm X 7 to 8mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over 15mm thick cement screed bed as bedding layer in CM 1:6 complete all as specified and directed.

M&L for joint free glazed coloured ceramic tiles of 300mm x 450mm x 7 to 8 mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic (light shade) tiles 8 to 9 mm thick (square/ rectangular) polished, area of Each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. & as directed.

Dismantling boarding, any description, fixed in any positioin with nails complete all as specified and directed.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking GI metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length spaced at 1200 mm center to center and cross "T" 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 7 to 9 mm thick square edge PVC Laminated Gypsum board Tile of size 595x595 mm, made of Gypsum plasterboard as per IS 2095 part I in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. including main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls/ceiling including pillasters and cornices etc. including washing, rubbing down and stoping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick wall care putty to achieve fair finish complete all as specified and directed. & directed.

Material and Labour for preparation of old decorated surfaces of wall/ceiling (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound emulsion (white or tinted) on walls complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls including pillasters and cornices etc. including washing, rubbing down and stoping the previously treated surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of acrylic water based primer tint and pattern as approved by GE complete all as specified and directed. Note:- The necessary scaffolding and safety net shall deemed to be included in quoted rates upto a height of G+5 storey building.

M&L for complete removal of existing treatement on wall surfaces with sand paper, iron patti or grinder, including pillasters and cornices etc.and applying two coat of interior acrylic emulsion paint over a coat of 1 mm thick wall care putty to achieve fair finish complete all as specified and directed.

M&L for complete removal of existing treatement on ceiling surfaces with sand paper, iron patti or grinder, including pillasters and cornices etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash complete all as specified and directed. Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L for preparation of old painted concrete surfaces such as chequerd tiles, paver blocks, kerb stones etc and similar surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

S&F in repair vertical venetian blinds consisting of aluminiuminium head rail with vanes/louvers 100 mm wide of approved tint and traverse cord fixed in position complete all as specefied and directed.

S&F in repair Double roller Zebra venetian blinds consisting of Mounting pelmet assembly, aluminiuminium head rail with flip cover of approved tint/shade and traverse cord as per manufacturer instruction fixed in position complete all as specified and directed.

S&F in repair aluminiuminium alloy body floor door stopper of size 75m having double round legs for better grip ,with rubber base fixed to door shutters with countersunk screws complete all as specified and directed.

Removal of blockage and cleaning of manhole (any size)of sewer line including removal of taken out material outside defence land distance n.exc. 5KM complete all as specified and directed. and as directed. Note: The quoted unit rate is deemed to be included the cost of labour for opening of man hole cover and re-fixing the same after cleaning the manhole.

M&L for removal of blockage and cleaning the floor trap, gully trap,IWC,EWC Wash basin, Urinal pots,bottle trap, in kitchen, lobby, bath room, toilets at any height of floor (Maximum G+7 Floor) including pipe line up to the first manhole, complete all as specified and directed. and as directed by Engineer-in-Charge. Notes for Item Ser Nos 150.00 to 151.00:- 1. Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc, toilet cleaner, detergent, soap etc. 2. Minimum 01 No of safaiwala alongwith necessary tools will be required to report to complaint cell (M'House) to collect the complaint slip from concerned JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, contractor shall provide the same to meet the requirements. As per numbers of complaints additional Sweeper/Helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint.

Removal of blockage in between two manholes spacing upto 18 meters of underground sewage line of any type and size upto 200 mm dia by means of mechnical rodding with vibrations/drilling concept. A trolley mounted motorized sewer cleaning machine for the execution of item shall have to be provided by the contractor. Blocked material, slugging obtained during execution of this item shall be removed from the site through trolly mounted motor out of defence land. Sewage line between existing two manholes shall be flushed with combined high pressure water jetting cum suction (vaccum type machine suitably mounted on HCV having facilities of hydraulic applications with suitable size of nozzle pipes. Item shall be executed by the contractor upto satisfaction of the Engineer-in-Charge. No extra claim, whatsoever shall be entertained at any stage. Quoted rate shall be deemed to include all aspects mentioned herein.

Excavation in trenches in hard / dense soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed.

M&L for PVC (SWR) 150mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding demolition and breaking up existing unserviceable PVC pipe and removal of debris complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia after they are laid and tested complete all as specified and directed.

S&F in repair 200mm internal dia PVC (SWR) pipes single socketed in any length with rubber ring joint, laid in trenches including dismantling old unserviceable pipe complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in concrete bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 200 mm internal dia after they are laid and tested complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 'P’ trap 110mm bore complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedstal pattern white including PVC seat cover with aluminiuminium hinging devices & EWC Jet chromium plated with 1.00 mtr long PVC connection pipe and PVC valveless syphonic action type flushing cistern low level 10 Ltr Capacity , white, with inlet , ball valve, float and handle including brackets etc complete all as specified and directed.

Returning, filling in hard/dence soil including spreading, leveling, watering and well ramming in layers n.exc. 25 cm complete all as specified and directed.

Removing excavated material/Malba to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe of 150mm bore SGSW pipe including making good to pipe and rendering, cutting out existing benching for and forming metreing branch channel in cement concrete (1:2:4) type B-1 fair finished complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and fair using extra cement complete all as specified and directed.

M&L for 15 mm thick Rendering on brick work or concrete surfaces in CM (1:4) mixed with WPC as per manufactures instructions finished even and fair without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint on newly plastered /priviously untreated wall surfaces complete all as specified and directed.

M&L for PCC (1:4:8), type D2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, area of Each tile exc. 0.11 Sqm but n.exc 0.18 Sqm in floor set & jointed in neat cement slurry and pointed in coloured cement to match coloure tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S&F grating droom of size 100/125/140 mm CP in round or square shape for out let of water etc complete all as specified and directed.

M&L Desilting and cleaning of open drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed.

S&F in repair cast iron sand cast soil waste and vent pipes in any length with or without ear with cement joint 100 mm bore laid in trenches or in floor complete all as specified and directed.

Ditto as per item No.175.00 above but fixed on walls with necessary MS clamps complete all as specified and directed.

S&F in repair CI bend any radious diminishing pieces or taper 100 mm bore complete all as specified and directed.

S&F CI branch pieces 100 mm dia ordinary or inverted or with parallel branch complete all as specified and directed.

Cleaning of septic tanks (sludge/dewatering) of size 2.80x2.80x3.00 mtr, and removal of sludge/water from out of MOD area to any distance complete all as specified and directed. Note :- T&P & Trasportation vehicle requested to remove the sludge are deemed to be included in qouted rates.

M&L for clearning of roofs i.e. removal of vegetables, roots, removal of blockage from mouth of rain water pipes and rubbish off from premises, brooming etc. up to seven stories buildings complete all as specified and directed.

M&L for Cleaning of manhole, septic tanks (sludge/dewatering), sewage line, any blocked manhole etc any size, clean by machine and removal of sludge/water from out of MOD area to any distance all as directed. (Note Rate also include for vehicle brought at site and removal of sludege / dewatering).

SAWARIYA ENGINEERS AND CONTRACTORS (BID ID -3142020)

SRK CONSTRUCTION (BID ID -3151722)