PETTY REPAIR, MISC B/R WORKS, TANK CLEANING, PLUMBING AND JOINERY WORKS IN SECTOR 28,31 AND 47 AT AF STN CHANDIGARH

Amount

Dismantling boarding any description fixed in any position with nails, complete all as specified and directed by Engineer-in-Charge.

Dismantling of framed work i.e fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section.complete all as specified and directed.

S & F plain fillets square, rectangular or triangular in section, 2nd class hardwood of sectional area exc 13 & n exc 25 sqcm, clean sawn, wrought finished secured with screws complete all as directed.

S&F for 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed by Engineer-in-Charge.

S&F for block board 18mm / 19mm thick, grade 2 quality, interior grade, commercial type, decorative one side with teak finished fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed.

S&F 6 mm Plywood grade BWR , type BB fixed with screws to timber frame work including taking down old plywood fixed in any position complete all as specified.

S&F Continuous (piano) hinges, stainless steel, bright finish or electro galvanised, 30 mm wide flap (when open), complete all as specified.

S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.

S&F 100mm size aluminum handle, 'D' type anodized complete all as specified and as directed.

S&F for 40mm dia, cupboard knobs fixed with nut, washers / screws etc., of brass polished, bright finished, complete all as specified and diercted.

S&F magnet catcher suitable for kitchen cabinet/coupboard with steel plate and stainless steel as required complete all as specified and as directed.

S&F in reapir 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.

S & F in repair 150 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified

S & F in repair 125 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specifid and directed.

S & F 125 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified

S & F in repair 300 mm MS ordinary rat tail rod pattern including roller and roller complete all as specified and directed.

S&F in repair 250 mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F door seal 50mm wide and 1 m in lenth built in aluminium black plate with nylon brush fixed with screws, complete all as specified.

S&F floor door stopper 140mm overall cover plate length of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed by Engineer-in-charge.

S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New wooden beading required for glazing glass in wooden window will be paid for separately.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

M&L for resecuring of existing window glass panes by using oil putty/ wooden beading as required complete all as specified and as directed.

S & F In repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F in repair in repair door closer hydrulicaly, aluminium regulated designation No.1 universal type suitable for door shutter up to 700mm in width and of weight not more than 35 Kg complete all as specified and directed.

M & L for repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable including resceuring/replacement of damaged wire mesh, glass panes,handle and tower bolt etc and making good to existing hinges,handles,tower bolts etc all as specified. Note:-The rate quoted against the item shall deemed to be included for replacemnet wire mesh,glass,hinges,handles,tower bolts etc.

M & L for repair to existing wooden/PVC/particle board cup board of any size,any description and at any position by taking down and refixing after reapir/renewal of unserviceable hinges/lock/knobs/handle/hasp & staple/ magnetic catcher etc of any type and size in steel,woodeen,particle board cup boards including necessary welding work as required complete all as per existing pattern as directed by Engineer-in-Charge. Note:- The rate quoted against the item shall deemed to be included for replacement of damaged lock/knobs/handle/hasp & staple/ magnetic catcher etc

Resecuring or easing and adjusting shutters of any description not exceeding 01 sq.m each without taking down shutter of any desciption compelte all as specified.

Resecuring or easing and adjusting shutters of any description exceeding 01 sq.m but n exc 2.00 sq,m each without taking down shutter of any desciption compelte all as specified.

Taking down wooden window shutter of size n.exc 1.00 sq.m from chokhats of Mild steel/wooden of any description and refixing in same opening after necceasry minor repair and renewal of necessary hardware fittings as required at site inlcuding welding hinges to frame, making serviceable shutter etc complete all as specified and directed . Note:- No extra payment given to contractor for replacement of damaged hardware fittings

Taking down wooden/PVC door shutter of size exc 1.00 sq.m but n exc 2.00 sq.m from chokhats of Mild steel/wooden/pressed steel of any description and refixing in same opening after necceasry minor repair and renewal of necessary hardware fittings as required inlcuding welding hinges to frame, making serviceable shutter etc complete all as specified and directed . Note:- No extra payment given to contractor for replacement of damaged hardware fittings

Taking down old aluminum door and refixing in same opening after reparing to damaged/loosened aluminum rail sections, tightening of scerws,reparing/replacement of locking arragment, repair and replacement of glass beading etc making door in servicealbe condiotion complete all as specified and directed.

S&F rotational moulded polythyene triple layered 500 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position including 20mm dia float valve brass fitting including old disconnecting and taking down old tank of any description complete all as specified and directed.

S&F rotational moulded polythyene triple layered 1000 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position including 20mm dia float valve brass fitting. including old disconnecting and taking down old tank of any description complete all as specified and directed.

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling, and floor etc., including removal from site, complete all as specified.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.

S&F steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified.

Cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F in repair 15mm bib tap standard of PTMT any colour long body high pressure screwed for iron pipe or GI/Kitec fiiting and fixed (minimum weight 15 mm- 105 gms) complete all as specifeid and directed Make-Prayag/Polytuf/Shakti

S&F in repair 15mm bore bib tap cost copper alloy CP fancy type with crutch or butterfly handle screwed down screwed to iron pipe or GI/Kitec fiiting complete all as specified and directed.

S/F in repair 15mm stop cock of PTMT any colour high pressure screwed for iron pipe or GI/Kitec fiiting and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) complete all as specifeid and directed Make-Prayag/Polytuf/Shakti

S/F in repair 15mm angle cock of PTMT any colour high pressure screwed for iron pipe or GI/Kitec fiiting and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) complete all as specifeid and directed Make-Prayag/Polytuf/Shakti

S/F in repair15mm bore stop cock/angle cock cast copper alloy fancy type CP screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions,or GI/Kitec fiiting complete all as specifeid and directed.

S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle, screw both end for iron pipe or GI/Kitec fiiting complete all as specifeid and directed. Note : No extra payment given to contractor for replacement socket,nipple,elbow and Tee.

S & F Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe, fixed in repair complete all as specified and directed. (Make: Cat No. 8675 of PRAYAG or equivalent in Parryware/CERA/ MARC Sanitation)

S & F in 15mm dia Brass CP Sink mixer (wall mounted) swan neck for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge. (Make : Cera /Prayag/Parryware/ MARC Sanitation)

S&F in repair swivel shower of PTMT any colour & Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gmsfor fixing with 15mm bore pipe (minimum weight 40gm) fixed to iron pipe or GI/Kitec fitting complete all as specifeid and directed.

S&F in repair CP fancy type 125mm size with CP shower arm 195mm long. Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or GI/Kitec fiiting complete all as specified and directed

S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium door and highdensity plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms.

S&F in repair Ball valve high pressure of PTMT with epoxy coated aluminium door and highdensity plastic ball screwed for 15 mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms. Note for Srl Item No 42 to 53:-The rates quoted against the items shall deemed to be included for replacement of damaged GI/Kitec fitting such as socket, elbow,nipple and tee of required size, fitted/connected with srl item no 42 to 53 and making good for any leakage complete all as specifeid and directed.

S&F in repair pillar tap standard of PTMT any colour high pressure screwed for 15mm dia of iron pipe and fixed.(minimum weight 15mm-110gms) complete all as specified.

S & F in repair 15 mm Pillar taps, fancy type cast copper alongwith capstan heads, chromium plated,swan neck screwed down high pressure , with or without coppered ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F in repair 15 mm CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S&F in repairs plastic water closet seat cover good quality in any colour(as required at site) with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and directed by Engineer - in -Charge. (Make :Prayag/ PARRYWARE/ HINDWARE/CERA )

S&F in repairs mild steel chromium plated jet including PVC pipe of suitable length for European/ pedestal type WC including all accessories, Fixed in repairs, complete all as specified and directed.

S&F in repairs hand shower (Health foucet) cast copper alloy chromium plated with and including 8mm dia 1.00 meter long PVC flexible tube and with hook complete all as specified and directed.

S&F in repair PVC waste pipe flexible for Sink/ WHB of 32mm size complete all as specified and directed by Engineer-in-Charge. (Make :PRAYAG/ POLYTUF)

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs Vitreous China squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. (Make :Prayag/Cera/ PARRYWARE/ HINDWARE )

S&F in repairs Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe) including connected to drains outlet, complete all as specified and directed by Engineer - in -Charge.(Make :Prayag/ PARRYWARE/ HINDWARE/CERA )

S&F in repairs wash basins, vitreous china, white, rectangular type of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, over and including new brackets complete all as specified and directed. (Make :PRAYAG/ PARRYWARE/ HINDWARE/CERA )

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 400mmx500mm as approved by Garrision Engineer. (Make : PRAYAG /PARRYWARE/CERA/ MARC SANITATION)

Taking down and Refixing of WHB/SINK to existing position including change of rusted bracket/ fastener as required at site, including refixing of existing piller tap/pvc connection/waste pipe/grating/bib tap etc and making good with white cement/grey cement to match existing surface complete all as specified and directed.

S & F PVC water tank cover suitable for water tank of Cap 500 Ltr / 1000 Ltr complete all as specified

S & F CP grating 75/100 mm dia/hinged circular of approved make and fixing with cement mortar 1:3 as in repair with/without holes as required complete all as specified.

S & F Syphonic action rod with float valve (complete kit) for Low level cistern fixed in repair all as specified and directed by Engineer-in-Charge Make-Prayag

S& F syphon washer/flush handle etc suitable for pvc low level flushing cistern of any capacity for attending the complaint of leakage of flushing cistern complete all as specified and directed.

S&F in repair CP waste coupling suitable for 32 /40 mm bore pipe complete all as specified and directed.

S&F in repair CP waste coupling for sink of size 75/100 mm bore pipe complete all as specified and directed.

S&F in repair CP towel rail 600mm long fixed with rawal plug and steel screws for repair complete all as specified.

S&F in repair CP towel ring of dia 300mm fixed with rawal plug and steel screws for repair complete all as specified.

S&F Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC rawl plugs and wooden screws as fixed in repairs, complete all as specified and directed.

S&F Corner glass shelf of radius 300 mm including 02 Nos. metallic holding brackets, railing etc. fixed with PVC rawl plugs and wooden screws, fixed in repairs, complete all as specified and directed.

Clearing of air lock in GI pipe of 15/20mm dia and making the water supply available upto water taps incl attending the complaints of no water supply including all necessary fitting as required at site complete to clear the complaint all as specified and directed.

S&F in repair multilayer composite (PE-AL-PE) pipes equal size 15mm conforming to IS-15450-2004 including taking down old pipes complete all as specfified and directed . Make- Astore/Jindal/Kitec

S&F in repair multilayer composite (PE-AL-PE) pipes equal size 20mm conforming to IS-15450-2004 including taking down old pipes complete all as specfified and directed Make- Astore/Jindal/Kitec

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified. Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 Mtr height building. 2.No extra payment made to contractor for patchwork or work in small repair as required at site/as directed.

M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 Mtr height building. 2.No extra payment made to contractor for patchwork or work in small repair as required at site/as directed.

M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & bottom of chajjas, beams, balcony ceiling, roof slab ceiling etc.) finished even and smooth without using extra cement, complete all as specified and directed by Engineer - in -Charge. Note: 1.The rate quoted by contractor is deemed to be included necessary scaffolding and form work as required upto 12.00 Mtr height building. 2.No extra payment made to contractor for patchwork or work in small repair as required at site/as directed.

Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over 1mm thick wall care putty to smoothening the surface by using sand paper, complete all as specified and directed.

M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.

Material and labour, PCC (1:2:4), 40mm thick, type B-1 using 20mm graded mechanically crushed stone aggregates, as in flooring, finished even & smooth using extra cement @1.2Kg/Sqm, laid in panels, complete all as specified and directed. Note: Glass dividing strips shall be measured and paid separately for panelling.

Supply and fix in position, Glass dividing strips, 3 mm thick and 38mm wide, as in floors, complete all as specified and directed.

Supply and fixing in repairs, drapery rod of mild steel 25mm dia, ribbed/fancy type, powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

M& L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge.

Reparing to concrete chajja, facias, columns, beams & loft of staicases etc and like by providing PCC 1:2:4 type B-0 including neceesaary formwork or provision of rendering 15 mm thick (avg thickness)in cement mortar (1:3) with chicken wire mesh after applying a coat of cement of slurry @3kg/sqm of surface finished even and fair, surface area not exceeding 600 mm wide in patches including taking down swollen/damaged plaster or concrete upto 12 mtr height complete all as specified and directed by Engr-In-Charge. Note: The rate quoted by contractor is deemed to be included necessary scaffolding and form work.

Demolition of brick masonry in any position built in any cement mortar, complete all as specified.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius in cement mortar (1:6), using old size bricks, complete all as specified.

Dismantling floor, health or wall tilling including cement mortar bedding (but not backing removing survicabletiles to store and rubbish off the primises complete all as specified and directed.

M&L for 25 mm thick, PCC (1:2:4), type B-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar, complete all as specified.

M&L First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick, joint free (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified. Note: Tile work to be executed in any position or in patches or as per site requirements

M & L for glazed ceramic (digital glossy finish) coloured tiles 350x450x8 mm thick, joint free on vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10mm thick cement mortar as in backing coat of tile in cement mortar 1:4, Complete all as specified and directed by Engineer-in-Charge. Note: Tile work to be executed in any position or in patches or as per site requirements.

Welding in repair exc 2.5 cm but n exc 5.00 cm in length thickness of metal to be welded n.exc 6mm, including cleaning, preparing the surfaces and holding the member in true position for maintenance of steel items such as gates, grills, doors window etc. complete all as specified and directed.

Disconnecting existing tanks of capacity exceeding 250ltrs but n. exceeding 500ltrs, draining out of water, setting a side( or lowering if required) for repair/cleaning and removing accumulated sluge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tanks located on roof of building and disinfecting the tank using bleaching powder to make the tank bacteria free, writing by stencil date of cleaning of tank with white synthetic enemel paint on black ground "Cleaned on (date)" height of words100mm, and hoisting if required, refixing and reconnecting in position after cleaning complete all as specified and as directed by Engineer-in-Charge.

Taking down eaves gutter and rainwater pipes (any size or pattern), including all fittings complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe as directed complete all as specified.

S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified.

S&F in repairs 100mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or in trenches complete all as specified.

S&F 75mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe as directed complete all as specified.

S&F in repairs 75mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius, complete all as specified.

S&F in repairs 75mm bore dia PVC floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm bore dia PVC multi floor trap(SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed by Engineer-in-Charge.

Note:- Amount of credit of Rs. 38110.00 for retrieved materials is mentioned in Schedule of Credit Page No 110 to 111 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Dhillon Construction Company

KUMAR AND COMPANY