WBPWD/EE/CKHED/eNIT-05/26-27

SITC of Microprocessor based programmable window alarm annunciator wall mounting panel made out 4/16 SWG CRCA Sheet with Base chanel of 75mm in black shade with gaskets, Lifting Hooks, Locks & Hinged Door with Cable Entry at Bottom and painted with Powder Coated Siemens Grey RAL 7035 shade, having Dimension 500mm(L) x 250mm(D) x 500mm(H) Approx and includes the following a) Microprocessor 16nos window alarm annunciator 240VAC, Size - H 138 x W 138mm (per window H 31.55 x W 31.55mm), Make-GIC, Model - AU2D16S -1Set b) Solid state Volume adjustable Hooter 220V AC (Make-GIC) - 1 Set c) Flash type push botton for test, reset, accept (Make-L&T) - 3 set d) PLC Extension module 110V AC-240V AC 8DI & 4DO (Make-GIC) - 3 Set e) PLC Base module 110V AC-240V AC 8DI & 4DO (Make-GIC-Genie Nx) - 1 Set f) Control MCB 6A SP 10kA MCB, 'C' Curve (Make-L&T) - 2 Set g) Neutral & Earth Link (Make- FTC/Reputed) - 1Set each The panel should be located in Facility Manager Office and to be fixed on the wall with 3"x1/4" M.S. Bullet fastner complete with all necy. Connections as required as per direction of EIC

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FRLS’ PVC insulated & unsheathed cu. wire (Make: Havells) in 20mm size PVC rigid conduit ‘FR’ (Precision make) incl. necy. fitting as reqd. as reqd. as per direction of EIC.

i) 2x1.5sq.mm for ECC

ii) 2x2.5 sq.mm + 1x1.5 sqmm for ECC

Supply & Laying of follwing 1.1 Kv. Grade PVC/XLPE armoured copper conductor multicore power control cable (Make: Havells) with earthing attachment in 10 SWG GI (Hot Dip) Wire to be laid as mentioned below :- A) 1.5 sq.mm. X 16 core (Oral Surgery Department, 6th floor).

i) Surface on wall

ii) Through existing masonary trench

iii) Through Cable Tray

S&F Compression type gland complete with brass gland,brass ring & rubberring for dust and moisture roof entry of PVC/Ar. Copper cable as below :-

a) 1.5 sq.mm. X 16 core.