07 /EE/PMD/PHED OF 2024-2025/SL2

Amount

Supply delivery at site of one no. AC microcontroller based servo controller Automatic voltage stabilizer, 3ph, 50 hz in natural oil cooled construction, suitable for unbalanced input and load with 3servo motor for indoor use with the following specification:- IS9815(1) (i) Maximum Ambietent temp-45C (ii) Input 0-250-500V, AC 3Ph, 50Hz 4wire (iii) Outpur-415V+1%, 3Ph, 50Hz (IV) Capacity- 30 KVA (V) Oil Quantity-As per Manufacturer standard to be supplied (IS-335) (Above unit must have U/V, O/L, O/L protection, I/P & O/P voltmeter Amp Meter, Buzzer with output MCCB and necessary with all ancillaties & auxiliaries) Make- wbphed approved make (Materials should be supplied after taking approval from department) (Test certificate, warranty certificate to be produced at the time of delivery)

Supply and delivery, laying on surface at site of 1 1 KV grade AL AR 3.5core 35 sq.mm XLPE LT cable as per IS 7098 and supply necessary items as per requirement of site as per direction of EIC (Make-WBPHED ) (Materials should be supplied as per requirement of site, no extra material bill be received by the department.)

Supply and delivery of 100A power distribution circuit breakers Protection-TMA, 50KA, 4P with SS encloser Make: WBPHED approved make

Supply and delivery of 100A onload Manual Changeover switch, 4P supplied with extended shaft and IP 65 pistol type handle with SS encloser as per direction of EIC. Make: WBPHED approved make

Supply delivery at site of 100A 6way copper Busbar chambe.Make:Any approved make of wbphed

Installation of the above mentioned 30 KVA automatic voltage stabilizer with completed all electrical connection and fitting fixing of above supplied MCCB, Change over switch, Busbar, with supplying the necessary electrical materials like lugs, gland, insulated rubber pad, etc as per required and complete the job as per direction of EIC

Excavation of soil for installation of Earth Electrode and filling & ramming For Morrum Soil.

Earthing with 50mm dia G.I pipe 3.64mm thick 3.04mtr long and 1 x 4 swg. G.I with (4mtrs long)13mm dia x 80mm long GI bolts, double nuts,double washers including supplying and fixing 15mm dia G.I pipe protection (1mtr long)to be fitted with bitumen and salt partly under the ground level and partly above the ground level driven to an average depth of 3.65mtr below the ground level and restoring the surface duly rammed.As per direction of EIC.By ISI- Medium GI Pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6 ) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supply delivery at site 500 litre capacity, P.V.C. water storage tank of approved make with closed top with lid (Black) - Multilayer

Supply & delivery at site 15 mm dia PVC flexible pipe

Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipe fittings conforming to IS-15778: 2007 Tank connecting nipple a)32 mm dia (for drain pipe)

b)25 mm dia (for water inlet to tank)

c) 20 mm dia (for pump suction line)

Supplying, fitting and fixing of 32 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 25 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 15 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying,fitting and fixing 25 mm dia check valve (horizontal) G.M. tested to 21 kg per sq. cm. 25 mm.

Supplying,fitting and fixing a) GM NRV (15 mm)

b) PVC Ball float valve (25 mm)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-I a) 25 mm dia (inlet from delivery line to tank)

b) 15 mm dia (inlet from delivery line to tank)

c) 32 mm dia (Drain line)

Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. With 1200 mm.dia.

Supply & Delivery at site 7 mtr. Conical/ Cylindrical GRP street light pole made by CNC filament machine using Thermoset resin having minimum 65% glass containt in one piece with straight non decorative GRP single arm of 1000 mm and internal junction box (6A SP MCB & 4 way connector). Top 85 ±2mm ID and bottom 176 ±2mm ID.

Construction of RCC foundation volume not less than 0.4 cum in portion 4:2:1 and Ø10 and Ø8 TOR including provision of cable entry in Pole junction box and neatly cemented finish (3mm thick) above ground level.

Erection of 7 mtr pole on RCC foundation.

Supply and delivery at site of 1.1 KV grade 2 core 6 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988.Make- PHED Approved make.

Laying of one No. cable of 1.1 KV grade 2 core 6 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable of 1.1 KV grade 2 core 6 sq.mm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supply & Storage of 60 watt LED fixtures with IP66 protection, PDC housing with finless design and polycarbonate cover(IK08). Pole dia. 48-60 mm. Make-PHED Approved Make

Supply & Storage of FRLSH PVC insulated 1.5 sqmm industrial grade copper conductor unsheathed flexible cables 1.1 KV confirming to IS 694. Make- PHED Approved Make

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Al. Cable.

Finishing the end of the same by crimping method incl. supplying and fixing solderless socket (Dowels make) tapes, anticorrosive paste & jointing materials. 2 core 6 sqmm cable.

Fitting fixing of above supplied street light fitting with suitable tie clam and MS plate for mounting on pole and connecting necessery wire including hiring charges of ladder and incidental charges.

Earthing with 1 no. of G.I. earth spike (20 mm dia x 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth one with separate 6 SWG G.I. Wires providing 15 mm dia G.I. pipe protection from earth spike feeder box/ junction box/ poles and fixing to the same by suitable nuts & bolts all commette as per direction of EIC.

Supply, delivery at site and storage of safety equipments : 4.5 kg Co2 fire extinguisher-1no., fire bucket-2 nos. , rubber mat-1no., shock treatment chart-1no. and first aid box-1no. as per stisfaction of EIC(for old & new pump house)

Supply, delivery and fitting fixing of Glow sign board as per following specification and direction of EIC. Erection of main structure of 5’-0” x 3’-6” x 6” (depth) with 40 mm x 40 mm x 5 mm thick MS angle and other section on necessary and inner support work by 40 mm x 40 mm x 5 mm thick MS angle dully welded with intermediated siftness structures having depth of 6” as per direction of EIC. The top and bottom including right, left and back sides of the structure shall be covered by 22 SWG G.I. sheet with brick piller required nos of MS bolt washer including 2 coat synthetic enamel paint & primer. Supply & fixing 2.5 mm thick super quality poly carbonate sheet with printing the size of sheet 5’-0” x3’-6”.The sheet on the back side with reserve cutting vinyle sticker with adhesive of the board and supply and fixing aluminium angle of with necessary screws, nuts, bolts etc. for rigidly fixed of the surrounding structure. Supply & fixking 4 nos. 20 watt LED tube light (Make-Approved make of PHED) fitting complete with all accessories on wooden batten structure with dully wire up ready for main operation of 230 volts. A.C. supply including inside wiring by 1.5 sq mm copper wire including porcelain connectors as required including transportation & shifting charges as per direction of EIC.(For old and new pump house)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathedcopper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Average run 6 mt(for old pump house)

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl.making necy. connections etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing 240/415 V, 16A DP MCB, 50 Hz, 10 kA with MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mendinggood the damages to original finish incl. painting, connection & provision for earthing attachment. Make- PHED Approved Make

Supply delivery and fitting fixing of LED batten 20 W tube light on wall as per direction of EIC. Make- PHED Approved Make

Add GST @ 18%

Add CESS @ 1%

BISHWANATH NANDI (BID ID -5610206)

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED (BID ID -5610217)