WBHD/EE/ED-1/eNIT-01/2026-27

SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories including dismental of existing lift:

Make :Category A

Type :- MRL Lift (Machine Room Less)

Load: (Minimum) 06 -Passenger/ 408 Kg.

Control: Microprocessor based with AC variable voltage & variable frequency (VVVF)

Machine:- Energy efficient machine, Gearless with Machine Room

Postion of Machine Room : MRL

Speed:- 01 Mtrs./Sec

Floor Served :- 3

Landing :- 3 All on same side

Travel : 6.6 Mtr.

Operation : Microprocessor based implex full collective with or without attendant.

Signals: Digital car position indicator , car travels direction indicator in car & at all landing with call registration indicator with braille

Leveling accuracy + 5mm(Micro levelling arrangement)

Car inside :.950...mm(W) x …1150..mm(D) x …2200(H)

Car Entrance : Clear Opening ..800. Mm (W) x 2000..mm(H) protected with car door for Accessible India Door Dimension:- 700mm(W)x2000mm(H)

Car Enclosure : Stainless Steel Sheet(20 SWG) with Hairline finish with hand rail

Car Ceiling & Lighting : Stainless Steel with hairline finish with LED lighting and Fan/ Integrated roof HS80 Stainless Steel Hue spot LED light

Car Ventilation: Pressure fan with anodised aluminium grill.

Car Flooring : Decorative granite flooring (As per direction of EIC and according to this Department's Order).

Car Door: Stainless Steel Centre/ Side opening automatic door provided with V3F controlled door drive system. Door Type- Two-panel centre opening Vision Panel

Landing Door : Stainless steel centre opening automatic door provided with V3F controld door drive system. Door Type- Two-panel centre opening Vision Panel

Door Opening : Automatic power operated door with full length Photocell assembly light curtain sensor.

MAP Floor Position:- Topmost floor (TOP)

Car design :- SS silver mirror

Car Panel Finish :- Side walls: Stainless steel Hairline Rear wall: Silver mirror polished stainless steel Front wall: Stainless Steel

Handrail:- Round Bend Handrail Silver brushed stainless steel at Rear Wall

Flooring:- 20 mm Customer provide Granite Stone (by customer) Car skirting material: Stainless steel Hairline

Car Door Finish:- Stainless steel Hairline

Car operating panel:- Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons with braille

Landing Signalization:- Stainless Steel 7 segment display Surface Mounted Silver brushed StSt Square,surface mounted with braille

PROTECTIVE DEVICES & OTHER ACESSORIES

ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of Power failure/Single phasing/others.

Overload Protection : Full loaded with overload protection. On overloading the lift care will not start with door remaining open and give audio display indication

Emergency lighting in car: Battery operated emergency lighting in the lift car.

Intercom system: Battery Operated intercom system in lift car, Machine Room & Control Room

Emergency Alarm: Battery operated alarm bell system in lift car and control room.

Fireman switch: Fireman switch at main landing terminal

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.

Main rope - As per manufacturer's standard conforming to IS.

Features:-

Correction drive to next level; Emergency Alarm @ Main Floor; Car Call backwards Overload function, constant indication/Buzzer; Bypass load Function Auto Cut off Fan and Light; Manual Rescue Operation Centralized Hoisting for lesser vibration and smooth travel; Pit Ladder; Micro movement Led Based Buttons; L.W.D. (Load Weighing Device); Direction & Position Indicator In Car & Landing; Advanced Car Position Indication; Automatic Brake Test function every 11hours Every run brake supervision; Phase reversal functioning; Signal Fixtures; +10% to –10% Voltage Fluctuation Withstanding Capacity; Door Open Button; Car Emergency Light Fireman Drive; Curtain of Light 169 Beams; Accurate Relevelling, Automatic, Closed Door Car door lock

Additional Fetures:-

Emergency Rescue Device with audio announcer; E-link provision only; Three way intercom Nudging service; Lift Announcer; BMS; Hue spot LED light; Access Control Provision CCTV provision only

DIMENSION OF SHAFT & POWER SUPPLY

Shaft Dimension 1630mm x 1500 mm

Pit Depth :1600 mm

Overhead : 4200 mm

Electric power supply : AC 415 Volt 3 Phase, 50 Hz, terminated in machine room as per IS.

Add. G.S.T.@ 18% (on Total from item no 1 to 1.49) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 1.49 + GST@18%) by bidder

Please Enable Macros to View BoQ information