Improvement works by providing false ceiling door windows Galvalume colour sheet for sunshade and wiring etc for accommodate rural division revenue branch to the second floor of Superintending Engineer s Office Karur

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

supplying and fixing of Hollow pressed steel door frames for single leaf and double leaved door using pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of hold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly etc,complete complying with standard specification and as directed by the departmental officers.

Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf of size 1.00m x 2.10m.

Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Openable type glass window with fixed glazing at top to a height of 0.3m with alminium grill for glazed portion in all floors having the Aluminium section such as outer frame of section (418/code) of 37.70x33mmx2mm @ 0.50kg/m, center mullions of (code 9153,2.50mm thick) 59x33x2.5mm @ 0.936kg/m,Z section of having 24.00mm vertical and width of 33mm @2.50mm thick.Confirming to code No [email protected]/m Aluminium clips of 3.60 length having total weight of 0.40kg or 0.109kg/m with neccessary accssories such as rubber beadings, special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary with power drills to the required extent and make good to the original conditons after fixing and also as directed. All the Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance with Is 1868/1962 for an average anodic film thickness of 15 microns etc. Complete.

Supplying and fixing of Gypboard ceiling with G.I. intermediate channel at length not exceeding 1.2 m using G.I. ceiling angle as ceiling such as 610 mm centre along the G.I. permit channel fitted along with the pheriphery with 125 mm tapered edge type board and finishing.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with t.w. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings

Supplying and fixing of 1200mm sweep ac ceiling fan wit regulator with 1.00m down rod on the exisitng clamps of crompton/rally/orient including cost of all materials lead, lift etc., complete.

Wiring with 2x1.50 sq.mm Pvc unsheathed cu multistand cable in suitable pvc rigid pipe in wall or ceiling with pvc accessories 5amps 3&2 pin flush type non interlocking c.s. plug including pin top with painting of suitable colour with contineous earthwire connection of 14 swg t.c. wire for plug point.

Wiring with 2x2.50 sq.mm Pvc unsheathed copper multistand cable of 650v grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with 150mmx100mmx 75mm T.W.switch box in flush with wall covered with 3mm tk. Hylum sheet for 15 amps 3pin flush type non interlocking c.s. plug including pin top with painting of suitable colour with contineous earthwire connection of 14 swg t.c. wire for plug point.