Improvement of Black spot on Gaggal Chetru Dharamshala Mecleodganj road Kali mata temple at Kotwali Bazar in Distrct kangra HP

Amount

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305 and 1603 and as per direction of the Engineer- In – Charge including setting out, shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty milimetres) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.

Providing concrete for plain/reinforced concrete 1:6:12 (One cement isto Six sand isto Twelve graded/crushed stone aggregate 40mm (Forty milimetres) nominal size) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 and as per the instructions of Engineer-in-charge within all leads, lifts of materials and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain / reinforced cement concrete grade M-20 (M-Twenty) design mix with graded crushed stone aggretgate 20mm (twenty milimetres) nominal size with minimum cement contents of 350Kgs (Three hundred fifty kilogramme) per cubic metre in open foundation as per drawings and MORD technical specifications for Roads Clause 802, 803, 1202 and 1203section 800 and 1200 including the cost of form work and curing complete. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforecd cement concrete grade M-20 (M-Twenty) design mix with cement contents not less than 330Kgs (Thtree hundred thirty kilograms) per cubic metrewith 20mm (Twenty millimetres) nominal size graded crushed stone aggregate in sub-structure as per drawings and MORD technical specifications fsection 800 and 1400 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, and wheel guard up to any floor level and curing complete including carriage of materials in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge

Supplying, fitting, and placing HYSD bar reinforcement (Fe 415) grade in road work in sub-structure complete as per drawing MORD technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position of steel bars complete in all respect including cost of binding wire upto all height / depths as per the instructions of Engineer-in-charge including carriage of material, within all leads, lifts of materials and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 100mm (Hundred millimeter) dia P.V.C pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, Abutments, Wing walls, Return walls and retaining/breast walls extended through the full width of the structure with slope I(V):20(H)(One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification Clause 1206.6 and as per direction of Engineer-in-charge including carriage of material, within all leads, lifts of materials and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Back filling with granular material obtained from approved querry / road side cutting behind abutments, wing walls, return walls and retaining walls / breast walls complete in road structure as per drawing and M.O.R.D. technical specifications clause 1604.7 and section 300 and as per direction and entire satisfaction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain and foundation of other structures or other sources graded and compacted transporting to site, spreading, grading in layers of 200mm (Two hundred milimetres) thickness and rolling with three wheel 80-100 (eighty- hundred) KN static weight road roller to meet requirement of table 300.1 and 300.2 as per M.O.R.D. technical specifications clause 301 and as per the direction of Engineer- in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Kapil Sharma

Rohit

PARDEEP KUMAR

Vinod Kumar

Vishwas Rathore